Epson ESC Manuel utilisateur

~ 1~

ESC/VP21 Command User’s Guide for Business Projectors

ESC/VP21 Command User’s Guide for

Business Projectors

~ 2~

ESC/VP21 Command User’s Guide for Business Projectors

Table of Contents

1. Introduction to ESC/VP21.................................................................................................................................. 3

2. ESC/VP21 Command Formats........................................................................................................................... 4

3. Applicable models ............................................................................................................................................... 4

4. Projector state and commands........................................................................................................................... 5

5. Command transmission timing ......................................................................................................................... 6

6. Error Status ........................................................................................................................................................ 7

7. Command list and applicable models................................................................................................................ 8

8. Command Details ............................................................................................................................................. 13

9. Appendix............................................................................................................................................................ 26

10. Revision History................................................................................................................................................ 28

means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION.

No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages

resulting from the use of the information contained herein.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchase of this product or third parties for damages,

losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or

unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON

CORPORATION(s operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any

consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEKO EPSON

CORPORATION.

EPSON is a registered trademark of SEIKO EPSON CORPORATION. EasyMP is a trademark of SEIKO EPSON CORPORATION.

Macintosh, Mac, and iMac are registered trademarks of Apple Computer, Inc. IBM is a registered trademark of International

Business Machines Corporation. Windows and Windows NTare registered trademarks of Microsoft Corporation in the United States of

America.

General Notice:

Other product names used herein are also for identification purposes only and may be trademarks of their respective owner. EPSON

disclaims any and all rights in those marks.

~ 3~

ESC/VP21 Command User’s Guide for Business Projectors

1. Introduction to ESC/VP21

ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and

monitor Epson projectors. The command codes are comprised of ASCII codes. Therefore the command codes can be

understood very easily and you can easily control projectors using a PC with a terminal emulator such as Microsoft Hyper

terminal.

Since ESC/VP21 is independent of communication protocols. Serial, USB or TCP/IP network can be used to transmit the

commands to projectors.

* Serial connection

A/V controller normally use as serial connection to control projectors. Refer toAppendix for details.

* USB connection

A USB interface can be used to control a projector. Refer to Appendix for details.

* Network connection

After establishing a TCP session, ESC/VP21 commands can be sent to projectors. Refer to ESC/VP.net protocol manual

~ 4~

ESC/VP21 Command User’s Guide for Business Projectors

2. ESC/VP21 Command Formats

2.1. Set command format

A set command consists of a command and a parameter. Projector returns a colon after executing the command.

There are two types of parameters. One is fixed such as ON, OFF, or 21. Other is a step parameter such as INC, DEC or

INIT.

INC: increments the parameter by one.

DEC: decrements the parameter by one.

INIT: initializes the parameter.

2.2. Get command format

A get command consists of a command and ?. Projector returns a response parameter after executing the command.

2.3. Null command

The null command is as command code of the return key code (Hex 0D). Projector returns a colon。The null command

can be used to confirm that the projector is in operation.

2.4. Illegal commands

Projector returns “ERR”and a return key code (Hex 0D) and a colon when it receives invalid commands.

ERR

：

3. Applicable models

EMP-600/800/8110/811/820, 30/52, 720/730/520, 73/83/74/54, 735, 8300/9300, 7800/7850, S1/S1H, 61/81, 830/835, 740/745/732/737, 821/828,

7900/7950, S3/S4, 765/760, 755/750, 62/82/X3, 1715/1710/1705/1700, 6000/6100, 1815/1810, S5/X5/83/822, 260/280, 6010/6110, 400W/410W,

83+/822+, 1825/, EX90, G5350/G5300/G5150/G5100/G5200W/G5000, S6/X6/W6, 1735W/1730W/1725/1720, Z80000WU/Z8050W,S7/X7/W7,

S8/X8/W8, 1830/1900/1910/1915/1920W/1925W, 440W, 450W/We/Wi, 460/e/i, 84H/He/L, 85H/HV,824H, 825H/HV, 826WH/WHV, 84+, 85+,

825+/826W+, S10/W10/X10, S9/X9/W9, S92/X92, 1760W/1770W/1775W/1750, G5950/G5900/G5800/G5650W/G5600/G5500/G5750WU/G5450WU,

455Wi/465i/465T, 93/95/96W/900/910W/905/915W/925, D283/D293/D6150/D6155W/D6250, 1860/1870/1880/1840W/1850W,

W01/S02/X02/W02/S11/X11/S12/X12/W12//X14, 420/425W/435W430

~ 5~

ESC/VP21 Command User’s Guide for Business Projectors

4. Projector state and commands

4.1. Standby state (Operation indicator is in orange)

When a projector is in a standby state, executable commands depends on projector models and standby configuration (network

on, network off). Refer to the following table.

(note1)EMP-61/81/830/835/740/745/821/828 returns “ERR”when it received commands other than PWR ON, PWR?, LAMP? and

Null commands.

(note2) EMP-7800/7850 returns “ERR”when it received commands other than PWR ON, PWR?, SOURCE? and Null commands.

(note3) EMP-8300/9300 returns “ERR”when it received commands other than PWR ON, SOURCE xx, PWR?, SOURCE? and Null

commands

All projectors returns “ERR”when the command format is not good. All projectors returns “ERR”when the projector is not ready to

reply the command. A null command is command name for “ENTER”or “RETURE”key of the keyboard the reply is “:”.

4.2. Power on state (Operation indicator is in green)

All commands are executable.

Models

Configuration

Executable commands

61/81, 830/835, 821/828

740/745/732/737, 760/765

S3/S4, 765/760/755/750

62/82/X3(76), 6100/6000

1715/1710/1705/1700

1815/1810/1825

S5/X5/83/822/823/83+/822+,

260/280, 400W/410W

G5350/G5300/G5100/G5200W/

G5150/G5000, 6110/6010,

1735W/1730W/1725/1720

84/85/824/825/826W

Z8000WU/Z8050W

S7/X7/W7, S8/X8/W8

1900/1910/1915/1920W/1925W

84H/85H/825H/826H

440W/450W/460

, and later model

Network on/off

PWR ON

PWR?

LAMP?

7800/7850

8300/8350/9300

7900/7950

(note3)

Network on

PWR ON, PWR?, SOURCE?,

Null command(note1)

Network off

PWR ON(Note2)

Others

~ 6~

ESC/VP21 Command User’s Guide for Business Projectors

5. Command transmission timing

5.1. Standby state

1). For all mode with the standby configuration of “network on”

The first command can be sent anytime and the subsequent commands should be sent after receiving a colon from the

projector.

2). Other than 1)

PWR ON can be sent any time.

5.2. Power on state

A command should be sent after receiving the colon of the previous command from the projector. The following is an

exception.When the PWR OFF command is sent to 7800/7850/8300/9300 with the standby configuration of “network off”,

the subsequent command should be sent 10 seconds after the colon is received.

In case that you can not wait for the colon and send a command after receiving it, instead send a command after the

execution time listed in the following table.

Command

Models

Execution time

PWR ON

Others

40seconds

830/835(note5)

7900/7950/740/745

20seconds

61/81/821/S3/S4

25seconds

PWR OFF (note4)

600/800/810/811/820

130seconds

Others

50seconds

740745, 732/737, 821

20seconds

S3/S4, 765/760/755/750, 830/835

82, 6100, 1715/1710/1705/1700,

1815/1810/1825, X5/822/823,

400W/410W, G5350/G5100/G5200W

S6/X6/W6,1735W/1730W/1725/1720,

84/85/824/825/826W, and later model

10seconds

SOURCE (note3)

5seconds (note2)

All others

3seconds

(note1) When a projector receives the PWR ON command, it tries to ignite the lamp by activating the ballast unit. In

case that the lamp fails to be ignited, it tries to ignite the lamp three times at maximum. When the lamp fails to

be ignited three times, it is a lamp failure.

The projector returns a colon within 40, 70 and 100 seconds when successful in the first, second and third times

respectively.

(note2) When the input vide sync signal is stable, a colon is returned within 5 seconds. However, it may takemore than

5 seconds when the input video sync signal is unstable.

(note3) Projector initiates the process of the input video signal recognition when it receives a SOURCE command. If the

signal of the video input is changing (for example, from SVGA to XGA by A/V controller) during the process of

the input video signal recognition, the projector returns “ERR”.

(note4) Projectors execute the PWR OFF command after they start completely.

(note5) Projectors might return “ERR”when “Quick Setup”and “Auto Focus”functions are set to ON.

5.3. Warning and abnormal cases

Projector executes commands normally while a warning indicator such as a high temperature warning is on.

Projector does not execute commands nor return a colon when the projector is in an abnormal state such as a lamp

failure and abnormal high temperature.

As for EMP-6100/6000, EMP-1715/1710/1705/1700, EMP-1815/1810, EMP-S5/X5/83/822 and the following models,

when an abnormal state is continued for 130 seconds after, PWR ON command becomes possible.

~ 7~

ESC/VP21 Command User’s Guide for Business Projectors

6. Error Status

A projector returns the error status when a projector receives "ERR?" command.

The following projectors can return the error status while the projectors become

the error status after cooling down.

EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/

EB-G5000/G5100/G5150/G5200W/G5300/G5350

And later models.

[The other models except the above models]

The models except the above models can return the error status while the projectors

The following table shows the return codes and the meaning of error status.

Command

Return code

ERR?

00 :There is no error or the error is recovered

01 : Fan error

03 : Lamp failure at power on

04 : High internal temperature error

06 : Lamp error

07 : Open Lamp cover door error

08 : Cinema filter error

09 : Electric dual-layered capacitor is disconnected

0A : Auto iris error

0B : Subsystem Error

0C : Low air flow error

0D : Air filter air flow sensor error

0E : Power supply unit error (Ballast)

0F : Shutter error

10 : Cooling system error (peltiert element)

11 : Cooling system error (Pump)

12 : Static iris error

13 : Power supply unit error (Disagreement of Ballast)

14 : Exhaust shutter error

15 : Obstacle detection error

16 : IF board discernment error

~ 8~

ESC/VP21 Command User’s Guide for Business Projectors

7. Command list and applicable models

7.1. Command table 1 (Fixed parameter)

(O：Supported -：Not supported)

Function

Command

600/800/

810/811/

820

720/

730/

520/

735

30/

73/

53/

74/

8300/

8350/

9300

7800/

7850/

7900/

7950

S1/

S1H

61/

830/

835

Power

PWR

Input source

SOURCE

PinP setting

PINP

A/V Mute Screen

MSEL

Auto Keystone

AUTOKEYSTONE

Aspect setting

ASPECT

Color mode

CMODE

Lamp hour

LAMP?

Brightness level

LUMINANCE

A/V Mute

MUTE

Freeze

FREEZE

Rear projection

HREVERSE

Ceiling

VREVERSE

Audio input

AUDIO

Key operation

KEY

Function

Command

740/745

732/737

760/765

755/750

821

828

6100

6000

1715/

1710/

1705/

1700

1812/

1810/

1825

S5/X5

83/822

83+/

822+

EX90

260

280

Power

PWR

Input source

SOURCE

PinP setting

PINP

A/V Mute Screen

MSEL

Auto Keystone

AUTOKEYSTONE

no S5

no 260

Aspect setting

ASPECT

-O

Color mode

CMODE

Lamp hour

LAMP?

Brightness level

LUMINANCE

A/V Mute

MUTE

Freeze

FREEZE

Rear projection

HREVERSE

Ceiling

VREVERSE

Audio input

AUDIO

Key operation

KEY

Closed Caption

CCAP

Air filter alarm timer

FLWARNING

Air filter timer

FLTIME

Air filter usage time

FILTER

~ 9~

ESC/VP21 Command User’s Guide for Business Projectors

Function

Command

G5350

G5300

G5200W

G5150

G5100

G5000

S6/S62

X6/

1735W/

1730W/

1725/

1720

84/85/

824/825

826W

Z8000WU

Z8050W

S7/X7/

X8/ W8

1910/

1915/

1920W/

1925W

Power

PWR

Input source

SOURCE

PinP setting

PINP

A/V Mute Screen

MSEL

Auto Keystone

AUTOKEYSTONE

X6,W6

Only

Aspect setting

ASPECT

Color mode

CMODE

Lamp hour

LAMP?

Brightness level

LUMINANCE

A/V Mute

MUTE

Freeze

FREEZE

Rear projection

HREVERSE

Ceiling

VREVERSE

Audio input

AUDIO

Key operation

KEY

Closed Caption

CCAP

Air filter alarm timer

FLWARNING

Air filter timer

FLTIME

Air filter usage time

FILTER

Serial Number

SNO?

Function

Command

460/e/i

450W/e/i

440W

455Wi

465i

465T

825H/HV,

826WH/W

HV, 85+,

825+,

824H

84H/He/L

84+

S10

W10/

X10

S9/X9/W9

S92/X92

1760W

1770W

1775W

1750

1750G

G5950

G5900

G5800

G5650W

G5600

G5500

G5750WU

G5450WU

96W

900

910W

905

915W

925

Power

PWR

Input source

SOURCE

A/V Mute Screen

MSEL

Auto Keystone

AUTOKEYSTONE

Aspect setting

ASPECT

Color mode

CMODE

Lamp hour

LAMP?

Brightness level

LUMINANCE

A/V Mute

MUTE

Freeze

FREEZE

Rear projection

HREVERSE

Ceiling

VREVERSE

Audio input

AUDIO

no 1860/

1840W

W/O

5800/5500

Key operation

KEY

Closed Caption

CCAP

Air filter alarm timer

FLWARNING

Air filter timer

FLTIME

Air filter usage time

FILTER

Serial Number

SNO?

~ 10~

ESC/VP21 Command User’s Guide for Business Projectors

Function

Command

D283

D293

D6150

D6155W

D6250

1860

1870

1880

1840W

1850W

W01/S02/

X02/W02/

S11/X11/

S12/X12/

W12//X14

420/425

W/435W

430

480/

485W/

480T/

485WT

Z8150/

Z10000/

Z1005/

Z8350W/

Z8355/

Z8450WU/

Z8455WU

Power

PWR

Input source

SOURCE

A/V Mute Screen

MSEL

Auto Keystone

AUTOKEYSTONE

W!01/S02

Aspect setting

ASPECT

Color mode

CMODE

Lamp hour

LAMP?

Brightness level

LUMINANCE

A/V Mute

MUTE

Freeze

FREEZE

Rear projection

HREVERSE

Ceiling

VREVERSE

Audio input

AUDIO

1840W/

1860

Key operation

KEY

Closed Caption

CCAP

Air filter alarm timer

FLWARNING

Air filter timer

FLTIME

Air filter usage time

FILTER

Serial Number

SNO?

Autres manuels pour ESC

Ce manuel convient aux modèles suivants

167

Table des matières

Autres manuels Epson Projecteur

Epson

Epson RB-V11H255020-N - PowerLite 83c LCD... Manuel utilisateur

Epson

Epson 835p - PowerLite XGA LCD Projector Dimensions

Epson

Epson PowerLite Pro Cinema 4040 Manuel utilisateur

Epson

Epson EB-W7 Manuel utilisateur

Epson

Epson EB-G5750WU Manuel utilisateur

Epson

Epson PowerLite 1720 Guide de référence

Epson

Epson PowerLite S5 Series Guide de référence

Epson

Epson PowerLite EB-805F Manuel utilisateur

Epson

Epson PowerLite 1720 Manuel utilisateur

Epson

Epson Pro Cinema LS12000 Manuel utilisateur

Epson

Epson PowerLite 1915 Manuel d'utilisation

Epson

Epson PowerLite 8300i withEasyMP.net module Manuel utilisateur

Epson

Epson EX100 Manuel utilisateur

Epson

Epson EB S6 Manuel utilisateur

Epson

Epson EMP 760 Manuel utilisateur

Epson

Epson EB-Z8000WUNL Manuel utilisateur

Epson

Epson EF-100W Manuel utilisateur

Epson

Epson PowerLite D6250 Manuel utilisateur

Epson

Epson EX31 Manuel utilisateur

Epson

Epson PowerLite 1985WU Manuel utilisateur

Epson

Epson BrightLink Pro 1410Wi Manuel utilisateur

Epson

Epson EB-D6155W Manuel utilisateur

Epson

Epson PowerLite 1835 Fiche technique

Epson

Epson EF12 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manuel utilisateur

JVC

JVC 1108TTH-AO-AO Manuel utilisateur