Epson ELPLX02S Manuel utilisateur
3
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Included Items List
Check the following list to confirm that you have all of the supplied items. If by any chance there
is anything missing or damaged, please contact your dealer.
Lens unit (With lens covers (large and
small))
Decorative cover (the shape of the cover to
be attached depends on the projector you are
using)
Attaching the Cover (separate sheet) User's Guide (this guide)
Safety Instructions
Read this document and the User's Guide supplied with the projector carefully to use this unit
safely and correctly. To allow you to solve any unknown points quickly, keep this information
close to hand.
So that you can use the product safely and correctly, symbols are applied in this Guide and on the
product to indicate possible harm to the user or to others and the risk of damage to property. The
indications and their meaning are as follows. Make sure you understand them properly before
reading the guide.
4
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Warning This symbol indicates information that, if ignored, could possibly
result in death or personal injury due to incorrect handling.
Caution This symbol indicates information that, if ignored, could possibly re-
sult in personal injury or physical damage due to incorrect handling.
Warning
•Disconnect the power cord from the projector before attaching or removing this product.
Attaching or removing while the power cord is connected could cause an electric shock.
•When attaching the product to the projector, make sure that it is securely installed and that
it is locked in place. If this product is not attached correctly it may fall, resulting in personal
injury or an accident.
•When removing dirt and dust from the product, do not use a spray that contains flammable
gas. The high heat generated inside the projector may cause a fire.
Caution
•When projecting, remove the lens cover from the front of the lens unit.
•Before attaching the lens unit, check the projector's model number. If this lens unit is at-
tached to a projector other than the specified projector, the lens unit or the projector could
be damaged.
•Be careful not to trap your finger when attaching this product to the projector. This may
cause an injury.
•Do not disassemble or remodel.
•Do not use or store the projector in places where it might be subjected to high and low
extremes of temperature. Also, avoid any sudden changes in temperature.
•Do not use or store the projector in places where smoke from oil or cigarettes may be pres-
ent, as it can adversely affect the quality of the projected images.
•Do not get it wet.
•Do not drop it or subject it to impacts. When putting this product down, make sure you
place it on a flat, stable surface.
•When moving the projector, do not hold the lens unit and decorative cover. They may come
off and the projector may fall causing an injury.
•Remove the lens unit when transporting the projector. If the projector is transported with
the lens unit attached, the lens unit or the projector could be damaged.
5
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Caution
•Do not attach the lens unit when the projector's lens insertion section is facing up. Dust or
dirt could enter the projector.
•Try not to touch the lens section with your hand or fingers. If fingerprints or oils are left on
the surface of the lens, projection quality deteriorates.
•Do not touch or pull the connector part or the cable as this could cause a malfunction.
•When cleaning this product, do not use a wet cloth or solvents such as alcohol, benzene, or
thinner as this could cause an electric shock or a malfunction.
•Attach the cover to the lens unit, and place it on its side on a stable surface. Failure to do so
may cause the lens unit to fall causing a malfunction or damage.
6
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Removing and Attaching the Lens Unit
Depending on the projector being used, procedures and illustrations may differ from the
explanations. Make sure you read the User's Guide supplied with the projector.
Attaching
A
Remove the lens replacement cover.
Keep the lens replacement cover in a safe place.
*The shape of the lens replacement cover and how to
remove it differs depending on the projector you are
using. See the“User's Guide”supplied with the projec-
tor.
B
Hold the lock lever and turn it counterclockwise.
C
Remove the lens cover (small) from the lens unit.
Use the cover when storing or transporting the lens
unit on its own. Keep the lens cover in a safe place.
7
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
D
Make sure the lens unit is not at an angle, and
insert it straight into the lens insertion section.
E
While holding the lens unit firmly, hold the lock
lever and turn it clockwise to lock the lens unit.
Check that the lens cannot be detached.
If it cannot be locked, the lens unit is at an angle.
Remove and then reinstall the lens unit.
F
Tighten the screws (4 points) to fix the lens unit.
Turn the screws by hand.
8
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
G
Attach the decorative cover.
See the "Attaching the Cover" supplied.
H
Remove the lens cover (large).
Keep the lens cover in a safe place.
After Replacing the Lens Unit
After replacing the lens unit, calibrate the lens so that the projector can correctly acquire the
lens position and adjustment range. After attaching a lens unit, a message is displayed when the
projector is turned on. Select [Yes] to calibrate the lens.
Adjusting the Image
For more information on the following, see the User's Guide supplied with the projector.
•Focus adjustment
•Distortion adjustment
When you perform distortion adjustment, the size of the screen changes.
•Lens shift
•Keystone correction
*This product is a fixed focus lens. The zoom function is not supported.
The User's Guide is available from the following Web site.
epson.sn
Visit the following Web site to find the projection distance calculator.
http://www.epson.com/
9
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Removing
Caution
•If lens shift has been performed, move the lens position to the home position before replac-
ing the lens unit.
•Turn off the projector and then wait for a while (approximately 30 minutes) before removing
the lens unit. If you touch the lens unit during projection or immediately after turning off the
projector, it could cause a burn.
A
Attach the lens cover (large).
B
Remove the decorative cover.
See the "Attaching the Cover" supplied.
10
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
C
Loosen the screws (4 points).
Turn the screws by hand.
D
While holding the lens unit firmly, hold the lock
lever and turn it counterclockwise to unlock the
lens unit.
Pull the lens unit straight out as it is released.
E
Attach the lens cover (small).
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Epson Accessoires pour projecteur
Epson
Epson ELPLL07 Manuel utilisateur
Epson
Epson ELPLX02 Manuel utilisateur
Epson
Epson ELPMB56 Manuel utilisateur
Epson
Epson ELPMB27 Instructions d'utilisation et de sécurité
Epson
Epson ELPMBP03 - Structural Round Ceiling Plate Mode d’emploi
Epson
Epson ELPMB27 Manuel utilisateur
Epson
Epson ELPMB45 Manuel utilisateur
Epson
Epson ELPMBPJF - Universal Projector Ceiling Mount Mode d’emploi
Epson
Epson ELPMBATA - High Security - Mounting Manuel utilisateur
Epson
Epson EpiqVision Ultra LS500 Manuel utilisateur
Epson
Epson BrightLink Solo Interactive Module (IU-01 Manuel utilisateur
Epson
Epson POWERLITE 8300I EMP-8300 Manuel utilisateur
Epson
Epson ELPWR01 Manuel utilisateur
Epson
Epson ELPLX01 Manuel utilisateur
Epson
Epson ELPMBC01 Mode d’emploi
Epson
Epson ELPMB22 Manuel utilisateur
Epson
Epson WN8111BEP Manuel utilisateur
Epson
Epson BrightLink 450Wi - Interactive Projector Manuel utilisateur
Epson
Epson Mounting bracket Manuel utilisateur
Epson
Epson ELPMBP01 Mode d’emploi
