Epson ELPMB44 Manuel utilisateur
User's Guide
User's Guide
3
Safety Instructions
For your safety, read alltheinstructions inthisguidebefore using this product. Incorrecthandling that ignores
instructions in this guide could damage this product or could result in personal injury or property damage.
Keep this installation guide at hand for future reference.
Read the User'sGuide andSafety Instructions for yourprojector and follow the instructions in these documents.
Safety indications
The documentation and this product use graphical symbols to show how to use this product safely.
The indications and their meaning are as follows. Make sure you understand them properly before reading
the guide.
Indication Explanation
Warning Thissymbolindicates information that, ifignored,couldresult in personal injury or even death
due to incorrect handling.
Caution This symbol indicates information that, if ignored, could result in personal injury or physical
damage due to incorrect handling.
Explanation of Symbols
Symbols Explanation
Indicates actions that must not be performed.
Indicates actions that should be performed.
Attention
Indicates contents that could cause damage or malfunction to this product or the projector.
c
Indicates related or useful information.
User's Guide
4
Safety Precautions for Installation
Warning
Follow the instructions in this guide when installing this product.
If the instructions are not followed, this product may fall, resulting in personal injury or an accident.
Do not install this product in an unstable location.
Make sure the installation location is strong enough to support the weight of the projector and this
product.
Do not use adhesives, lubricant, oil, and so on when securing the screws.
If you use adhesives on the mount fixing points to prevent the screws from loosening, or if you use
things such as lubricants or oils on the projector, the projector case may crack and cause the pro-
jector to fall, resulting in personal injury or property damage.
This product is for portrait projection or stacked projection only. Do not attach
any devices other than the projector.
Otherwisethisproductmaybedamaged;if theprojectorfalls,itcouldcausedeathorpersonalinjury.
This product should be installed by at least two qualified service personnel.
When loosening screws during installation, be careful not to drop this product.
If this product or the projector falls, it could cause death or personal injury.
After making adjustments, make sure you tighten all of the screws.
Otherwise, the product may fall and cause personal injury or property damage.
Wear non-slip gloves when moving and installing.
If this product falls, it could cause personal injury or property damage.
Do not cover the projector's air intake vent or air exhaust vent.
If either of the vents is covered, the internal temperature could rise and cause a fire.
Caution
Do not install this product in a location subject to temperatures outside the pro-
jector's operating range.
This may cause malfunctions to occur.
Do not install the projector in a location where it may be subject to vibrations or
shocks.
When securing the frame with bolts, make sure you do not catch your hand or
finger between the bolts and the frame.
Do not stack more than three projectors in a stacked configuration.
The frame could fall and cause an injury.
User's Guide
5
Notes on Usage
Warning
Modifying and disassembling should only be performed by qualified service per-
sonnel except when explicitly stated in the User's Guide.
Otherwise, malfunctions or accidents may occur.
Do not hang from this product.
Also, do not hang any objects on this product except for the projector.
If this product breaks and falls, it could cause death or personal injury.
Do not stand or sit on this product.
Otherwise, the product could be damaged.
Periodically check that there are no damaged sections or loose screws.
If any parts are damaged, stop using the product immediately.
If this product or the projector falls, it could cause death or personal injury.
Caution
Do not apply too much force when adjusting this product.
Otherwise, the product may break and cause an injury.
Do not place screws or feet within reach of small children.
Children may swallow them by accident.
If this happens, contact a doctor immediately.
User's Guide
6
Product Features
Portrait Projection
For projectors that support portrait projection, you can perform portrait projection by placing a projector in the
frame, and then installing the frame vertically.
Stacked Projection
You can secure a projector to this product, and stack up to two projectors.
c
•You can also install projector installation plates on the frame, and place the projector.
•You can stack two frames and place a backup projector on top.
•This product can support a backup projector that weighs up to 15 kg.
User's Guide
7
Package Contents
The following parts are supplied with this product. Make sure that all of the parts are supplied.
If there is anything missing or if there are damaged parts, contact the store where you purchased the product.
Top Frame (x1) Bottom Frame (x1) Projector Installation Plates (x2)
Screws for securing the Projector In-
stallation Plates
(x2)
Stacking Guides (x5) Stoppers (x4)
Shape Name
Number
Usage
M6 x 30 mm hexagon socket head cap bolt
with washer/spring washer
4 For attaching the projector
M6 x 40 mm hexagon socket head cap bolt
M6 hexagon nut
10 For attaching the Stacking Guides
Use the bolts or screws supplied with this product to install it as directed in this guide. Do not substitute these
bolts with any other types.
c
•Gather the tools and parts you need before you begin installation.
•Dispose of this product in accordance with your local laws and regulations. Follow the disposal
regulations of your workplace if they apply.
User's Guide
8
Attaching to the Projector
Attention
•Do not remove screws for parts that are not specified in this guide.
•Make sure the screws to secure the projector to this product, as well as the metal fittings to connect the top
and bottom frames are secured.
a
Attach the top frame to the projector.
Align the bolt holes on the top frame with the ceiling mount fixing points (four points).
Use a commercially available hexagon wrench to tighten the M6 x 30 mm bolts (with washers/spring
washers) supplied, and then secure the frame.
b
Attach the top frame to the bottom frame.
Align the Top Frame with the Bottom Frame, and rotate the metal fittings (four points) to secure them
in place.
User's Guide
9
c
Attach the stoppers (four points).
d
Remove the projector's feet.
See the User's Guide supplied with the projector for information on how to remove the feet.
Attention
•If the projector's feet are left attached, they could interfere with the frame during angle adjustment.
•Do not place the projector directly on the floor and so on while the projector's feet are removed.
Table des matières
Langues :
Autres manuels Epson Accessoires pour projecteur
Epson
Epson ELPLX02 Manuel utilisateur
Epson
Epson CHF 4000 Manuel utilisateur
Epson
Epson BrightLink Solo Interactive Module (IU-01 Manuel utilisateur
Epson
Epson PowerLite 450W Manuel utilisateur
Epson
Epson ELPMBATA - High Security - Mounting Manuel utilisateur
Epson
Epson ELPMB29 Manuel utilisateur
Epson
Epson Panamorph ELPALK2 Manuel utilisateur
Epson
Epson ELPLX03 Manuel utilisateur
Epson
Epson ELPMBP01 Mode d’emploi
Epson
Epson 7900p - PowerLite XGA LCD Projector Manuel utilisateur
Epson
Epson ELPMB56 Manuel utilisateur
Epson
Epson ELPMB27 Instructions d'utilisation et de sécurité
Epson
Epson ELPLX02S Manuel utilisateur
Epson
Epson ELPIUO3 Manuel utilisateur
Epson
Epson ELPMBP03 - Structural Round Ceiling Plate Mode d’emploi
Epson
Epson ELPMB22 Manuel utilisateur
Epson
Epson BrightLink Solo Interactive Module (IU-01 Manuel utilisateur
Epson
Epson ELPWP10 Manuel utilisateur
Epson
Epson ELPMB62 Manuel utilisateur
Epson
Epson EpiqVision Ultra LS500 Manuel utilisateur
