Epson ELPMBPJF - Universal Projector Ceiling Mount Mode d’emploi

Installation and Assembly:

Universal Projector Ceiling Mount

Model: ELPMBPJF

3215 W. North Ave. • Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com

Maximum UL Load Capacity: 50 lb (22.7 kg)

This product is UL Listed. It must be

installed by a qualified professional

installer.

Manufactured by Peerless Industries, Inc.

ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08

Visit the Peerless Web Site at www.peerlessmounts.com 2 of 10

For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

Table of Contents

Parts List..............................................................................................................................................................................3

InstallationtoExtensionColumn...........................................................................................................................................4

Installation to Wood Joist Ceilings ........................................................................................................................................5

InstallationtoConcreteCeilings............................................................................................................................................6

FlushMountApplication .......................................................................................................................................................7

Attaching Adapter Plate to Projector..................................................................................................................................7-8

Attaching Adapter Plate to Projector Mount..........................................................................................................................8

ProjectorAlignmentandAccessories ...................................................................................................................................9

WarrantyInformation...........................................................................................................................................................10

Tools Needed for Assembly

•studfinder("edgetoedge"studfinderisrecommended)

•phillipsscrewdriver

•drill

•1/4" bit for concrete surface

•5/32" bit for wood joist

NOTE: Read entire instruction sheet before you start installation and assembly.

• Do not begin to install your product until you have read and understood the instructions and warnings contained in this

InstallationSheet.Ifyou have any questions regarding any of the instructions or warnings, call Peerless customer care

at1-800-729-0307.

• This product should only be installed by someone of good mechanical aptitude, has experience with basic building

construction, and fully understands these instructions.

• Makesurethatthesupportingsurfacewillsafelysupportthecombinedloadoftheequipmentandallattachedhard-

wareand components.

• Neverexceedthe Maximum ULLoad Capacity.

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Thisproductisintendedforindooruseonly.Use of this product outdoors could lead to product failure and personal

injury.

• Tightenscrewsfirmly, but donotovertighten.Overtightening can damage the items,greatlyreducingtheir holding

power.Seesuggestedtorque values where applicablewithinthese instructions.

• When installing or adjusting the ceiling mount, do not use adhesives, lubricants, or oils, to prevent the screws from

loosening. If you use adhesives, lubricants, or oils to prevent the screws from loosening, the casing may crack and the

projector may fall, causing serious injury and damage to the projector.

WARNING

ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08

3 of 10

Visit the Peerless Web Site at www.peerlessmounts.com For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

MOP

NOTE: Actualpartsmay appear slightly different than illustrated.

Parts List

Description Qty. Part Number

Aprojector mount 1 055-0016

B4 mm security allen wrench 1 560-9646

CM5 x .8 x 10 mm socket pin type F screw 1 520-2031

D#10-32 x 3/8" spade thumb screw 1 560-2107

E#10-32 x 3/8" serrated washer head socket pin screw 1 520-2151

F#14 x 2.5" phillips hex head wood screw 2 5S1-015-C04

Gceiling plate 1 580-4042

H.25" ID x .56" OD x .26 spacer 2 590-2071

Iextension column connector with cord management 1 580-4025

J#10-32 x 3/8" socket pin screw 2 520-2084

K#10-32 x 3/16" slotted set screw 3 520-2187

Ladapter plate 1 055-KUNV-S-2

MM3 x 8 mm serrated washer head socket pin screw 4 510-2004

NM4 x 10 mm serrated washer head socket pin screw 4 510-2060

OM5 x 10 mm serrated washer head socket pin screw 4 510-2063

PM6 x 10 mm serrated washer head socket pin screw 4 510-2066

Q2 mm security allen wrench 1 560-1097

Rwasher 4 540-2025

Before you start check the parts list to ensure all of the parts shown are included.

ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08

Visit the Peerless Web Site at www.peerlessmounts.com 4 of 10

For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

Screw extension column (sold separately) to ceiling plate (G). Align the notch with one of the four holes in the ceiling

plate (G) and secure extension column with a M5 x 10 mm socket pin screw (C) using security allen wrench (B).

See detail 1.

Screw extension column connector (I) to extension column. Align slot in extension column with one of the top holes

in extension column connector (I). Insert and tighten one #10-32 x 3/8" socket pin screw (J) through extension

column connector (I) into slot on extension column using security allen wrench (B). See detail 2.

Screw projector mount (A) into extension column connector (I). Align slot in projector mount (A) to one of the bottom

holes in extension column connector (I). Insert and tighten one #10-32 x 3/8" socket pin screw (J) through extension

column connector into slot in projector mount (A) using security allen wrench (B). See

detail 3.

*NOTE: Slotted set screws (K) are used to jam against the threads of each connecting joint to prevent any excess

movement.Donot overtightenscrews;overtighteningscrewswilldamagethreadsmakingitdifficulttoseparatethe

products.

Skip to step 2.

DETAIL 3

SLOT

DETAIL 2

DETAIL 1

EXTENSION

COLUMN

Installation to Extension Column

EXTENSION

COLUMN

SLOT

EXTENSION

COLUMN SLOT

EXTENSIONCOLUMN

(ULListedELPMBC01,

EXTorADJ Series)

(SoldSeparately)

UL Listed ELPMBP01, ELPMBP02, ELPMBP03 or

ULListedCMJandACCSeriesCeilingMounts

(SoldSeparately).

ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08

5 of 10

Visit the Peerless Web Site at www.peerlessmounts.com For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

WOOD

JOIST

CEILING

Drill two 5/32" (4 mm) dia. holes to a minimum depth

of 2.5" (64 mm). Attach ceiling plate (G) with two

#14 x 2.5" (6 mm x 65 mm) wood screws (F) as

shown using 3/8" (10 mm) socket wrench.

Skip to step 2.

For optional Cord Management,

installtwospacers(H) between ceiling

plate(G)andceiling.

Installation To Wood Joist Ceilings

WOOD

JOIST

CEILING

• Tighten wood screws (F) so that wall plate (G) is firmly

attached,butdo notovertighten.Overtightening can

damagethescrews, greatly reducing their holding

power.

• Never tighten in excess of 80 in • lb (9 N.M.).

• Make sure that mounting screws are anchored into the

center of the studs. The use of an "edge to edge" stud

finderishighly recommended.

WARNING

• It is the responsibility of the installer to verify that the

supportingsurfacewill safely support the combined

loadofall attached hardwareandcomponents.

WARNING

IMPORTANT: Be sure to drill holes into the joist CENTER!

ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08

Visit the Peerless Web Site at www.peerlessmounts.com 6 of 10

For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

NOTE: ACC203 (Alligator concrete anchors are not

included) are recommended.

Drill two 1/4" (6 mm) dia. holes to a minimum depth of

2.5" (64 mm). Attach ceiling plate (G) using two concrete

anchors and #14 x 2.5" wood screws (F) as shown in

Illustration A and 1, 2and 3. Tighten all fasteners.

IMPORTANT: It is the responsibility of the installer to

verify that the ceiling will safely support the

combined load of all attached hardware and

components.

Skip to step 2.

Installation to Concrete Ceilings

•FORDIRECTATTACHMENT TOLOADBEARING

CONCRETEONLY!Concrete expansionanchorsare

not intendedforattachmenttoconcreteceilings

coveredwithalayer of plaster,drywall,orother

finishingmaterial.Ifmounting to concrete ceiling

coveredwithplaster / drywall is unavoidable,plaster/

drywallmustbe counterbored as shownbelow.

WARNING

CUTAWAYVIEW

INCORRECT

concrete

metal

bracket

plaster/

drywall

CORRECT

concrete

metal

bracket

plaster/

drywall

Illustration A

CONCRETECEILING

CONCRETE

ANCHOR

• Tighten wood screws so that wall plate is firmly

attached,butdo notovertighten.Overtightening can

damagethescrews, greatly reducing their holding

power.

• Never tighten in excess of 80 in • lb (9 N.M.).

WARNING

Drill holes and insert anchors

Place ceiling plate over anchors and secure with screws

Tighten all fasteners

concrete

surface

Fconcrete

anchor

concrete

anchor

• Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor.

• Makesurethatthesupportingsurfacewillsafelysupportthecombinedloadoftheequipmentandallattachedhard-

wareand components.

WARNING

ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08

7 of 10

Visit the Peerless Web Site at www.peerlessmounts.com For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

Screw projector mount (A) into ceiling plate (G).Align the notch with one of the four holes of the ceiling

plate (G) and secure projector mount (A) with a M5 x 10 mm socket pin screw (C) using security allen

wrench (B) as shown in detail 1.

NOTE: Slotted set screw (K) is used to jam against the threads of mount to prevent any excess movement of the

projectormount(A).Do not overtightenscrew;overtightening screw willdamagethreads making

it difficult to separate the products.

Flush Mount Application

DETAIL 1

CEILING

NOTCH

MOUNTING

HOLE

NOTE: Theprojectoryouareinstallingmay differ in

appearancefromthesample illustrated below.

NOTE: Someprojectorsmay have three orfour

attachment points. If projector has three attachment

points,theunusedlegmayberemoved.

Placeprojectorupsidedown.Locateadapter

plate (L) with notch*facing forward as close to

projectorcenterofgravity as possible without

coveringanymounting holes. Loosenchannels,and

ifthereare only threemountingholes remove fourth

channel.Usingone channel for eachmountinghole,

positionfeetof channels over mountingholesas

shown.Important: Ifprojectordoesnot have at

least three mounting holes, do not use this adapter

plate.Oncechannelsareinpositionretighten

fasteners.

NOTE: Someprojectorshave feet whichcanbe

removedand thecorrespondingthreaded insertcan

beusedfora mounting hole.

*Notchindicates front of projector.

Attaching Adapter Plate to Projector

WOOD

JOIST

*FRONTOF

PROJECTOR

• It is the responsibility of the installer to ensure that the

projectorisproperly ventilated. Feet ofchannelsare

usedto raise the mount off the projector surface.

CAUTION

ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08

Visit the Peerless Web Site at www.peerlessmounts.com 8 of 10

For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

Attach adapter plate (L) to projector using one

screw (M, N, O or P) for each channel as shown.

Tighten all screws, while keepingthecenterofgravity.

Be sure that adapter plate (L) is straight.Adjust the feet

ofthechannelsto keep the adapter platelevel.Tighten

all screws with 4 mm security allen wrench (B) or

wrenchprovidedwith projectormount,while keeping the

center of gravity. If M3 screws are used, tighten using 2

mm security allen wrench (Q).

NOTE:Projectors may requiredifferentsizescrews for

mounting. Use a combination of screws (M, N, O or P)

and foot adjustment that will result in channels of

adapterplate(L)fitting tightly against projector.

Important:In order to properlyengagethethreads in

the mounting holes, the screw must be turned at least

3 full turns.

NOTE: Ifusingscrew (M),placewasher (R)between

screw(M)and foot of channel.

FOOTOF

CHANNEL

M,N, O

or P

4Attach projector, with adapter plate already on it,

to the projector mount (A) by inserting the

projectormount(A)into theadapterplate

connection and twisting until the adapter plate will

nolongerturn (about75°).The spring loaded

captivescrewshould line up withacorresponding

hole on the adapter plate (this should line up

automaticallywhenthetwoareconnected).Push

downandtighten the springloadedcaptivescrew

to secure the adapter plate to the mount. If not

usingtheoptionalsecurity feature, fasten thumb

screw (D)intheholeoppositethe spring loaded

captivescrew.

OPTIONAL: For security option, use #10-32 x

3/8" security screw (E) in the hole opposite the

springloadedcaptivescrew.Tightenwithsecurity

allenwrench(B). Thiswillprevent the projector

frombeingremoved.

NOTE: Be sure to only use the #10-32 x 3/8"

screw (E) (or the thumb screw (D) opposite

the spring loaded captive screw.

LEG

Attaching Adapter Plate to Projector Mount

CAPTIVE

SCREW

WOOD

JOIST

CEILING

CUTAWAY VIEW

OFCEILING

PLATE (G)

PROJECTOR

• Do not lift more weight than you can handle! Use

additionalmanpower or mechanicalliftingequipment

tosafelyhandle placement of the projector!

WARNING

ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08

9 of 10

Visit the Peerless Web Site at www.peerlessmounts.com For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

To adjust roll, pitch and yaw loosen the set screw (shown

below) using allen wrench (B). You should be able to just

slightly loosen the screw so that your adjustments can

besetwithout having to holdtheprojector. Moveprojector

to desired position and slowly tighten set screw.

IMPORTANT: Allen wrench is your key for projector

removal. Store it in a safe place.

Projector Alignment

SET

SCREW

PROJECTOR

ELPMBP03

Structural Round Ceiling Plate

• Mounts to wood joist or structural concrete ceiling

• Features cable management access hole

• 1 ½" - 11.5" NPT fitting for attachment of

adjustable extension column

• Max weight load: 150 lb (68 kg.)

• Color: White

Accessories

NOTE:All accessories are availableforpurchasethrough Epson (www.epson.com)

ELPMBC01

Adjustable Extension Column (Pipe) 8" - 11"

• 8" - 11" adjustable extension in 1" increments

• Specially designed to allow internal cable

management

• 1 ½" - 11.5" NPT pipe threaded on both ends

• Notched ends for use with set screw to provide

safety and security

• Color: White

ELPMBP01

Adjustable Suspended Ceiling Channel Kit

• Mounts above 2' x 2' or 2' x 4' ceiling tile to structural

ceiling with tie wires

• Includes tie wire supports and flush

mount tube

• 1 ½" - 11.5" NPT fitting for attachment of

adjustable extension column

• Two knockout panels for electrical outlet

boxes

• 13.9" continuous, uninterrupted projector

adjustment

• Escutcheon ring included for a clean finish

• Max weight load: 60 lb (27 kg.)

• Color: White

ELPMBP02

False Ceiling Plate Kit

• Replaces a 2' x 2' ceiling tile and mounts to

structural ceiling with tie wires

• Two-piece design offers five different

points for mount attachment

• Includes tie wire supports and flush mount

tube

• 1 ½" - 11.5" NPT fitting for attachment of

adjustable extension column

• Two knockout panels for electrical outlet boxes

• Max weight load: 50 lb (23 kg.)

• Color: White

ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08

Visit the Peerless Web Site at www.peerlessmounts.com 10 of 10

For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

3HHUOHVV,QGXVWULHV,QFHVWDEOLVKHVDZDUUDQW\SHULRGRIÀYH\HDUVIRUSURGXFWVPDQXIDFWXUHGRUVXSSOLHGE\3HHUOHVV7KLVSHULRGFRPPHQFHVIURPWKHGDWH

RIVDOHRIWKHSURGXFWWRWKHRULJLQDOFRQVXPHUEXWZLOOLQQRFDVHODVWIRUPRUHWKDQVL[\HDUVDIWHUWKHGDWHRIWKHSURGXFWҋVPDQXIDFWXUH'XULQJWKHZDUUDQW\

SHULRGVXFKSURGXFWVZLOOEHIUHHIURPGHIHFWVLQPDWHULDODQGZRUNPDQVKLSSURYLGHGWKH\DUHLQVWDOOHGDQGXVHGLQFRPSOLDQFHZLWKWKHLQVWUXFWLRQVHVWDEOLVKHGE\

3HHUOHVV,QGXVWULHV,QF6XEMHFWWRDSSOLFDEOHOHJDOUHTXLUHPHQWVGXULQJWKHZDUUDQW\SHULRG3HHUOHVVZLOOUHSDLURUUHSODFHRUUHIXQGWKHSXUFKDVHSULFHRIDQ\

VXFKSURGXFWZKLFKIDLOVWRFRQIRUPZLWKWKLVZDUUDQW\

$Q\RWKHUZDUUDQWLHVSUHVFULEHGE\WKHODZZKLFKPD\DSSO\ZLWKUHVSHFWWRVXFKSURGXFWVDOVRDUHOLPLWHGLQGXUDWLRQWRWKHZDUUDQW\SHULRGVSHFLÀHGLQWKLV/LPLWHG

)LYH<HDU:DUUDQW\

7KLVZDUUDQW\GRHVQRWFRYHUGDPDJHFDXVHGE\DVHUYLFHRUUHSDLUVE\WKHFXVWRPHURUDSHUVRQZKRLVQRWDXWKRUL]HGIRUVXFKVHUYLFHRUUHSDLUVE\3HHUOHVV

,QGXVWULHV,QFEWKHIDLOXUHWRXWLOL]HSURSHUSDFNLQJZKHQUHWXUQLQJWKHSURGXFWFLQFRUUHFWLQVWDOODWLRQRUWKHIDLOXUHWRIROORZ3HHUOHVVҋLQVWUXFWLRQVRUZDUQLQJV

ZKHQLQVWDOOLQJXVLQJRUVWRULQJWKHSURGXFWRUGPLVXVHRUDFFLGHQWLQWUDQVLWRURWKHUZLVHLQFOXGLQJLQFDVHVRIWKLUGSDUW\DFWLRQVDQGIRUFHPDMHXUH

,QQRHYHQWVKDOO3HHUOHVVEHOLDEOHIRULQFLGHQWDORUFRQVHTXHQWLDOGDPDJHVRUGDPDJHVDULVLQJIURPWKHWKHIWRIDQ\SURGXFWZKHWKHURUQRWVHFXUHGE\DVHFXULW\

GHYLFHZKLFKPD\EHLQFOXGHGZLWKWKHSURGXFW

7KLV/LPLWHG)LYH<HDU:DUUDQW\LVLQOLHXRIDOORWKHUZDUUDQWLHVH[SUHVVHGRULPSOLHGDQGLVWKHVROHUHPHG\ZLWKUHVSHFWWRSURGXFWGHIHFWV1RUHWDLOHUGHDOHU

GLVWULEXWRULQVWDOOHURURWKHUSHUVRQLVDXWKRUL]HGWRPRGLI\RUH[WHQGWKLVZDUUDQW\RULPSRVHDQ\REOLJDWLRQRQ3HHUOHVVLQFRQQHFWLRQZLWKWKHVDOHRIDQ\SURGXFW

PDQXIDFWXUHGRUVXSSOLHGE\3HHUOHVV

7KLVZDUUDQW\JLYHVVSHFLÀFOHJDOULJKWVDQG\RXPD\DOVRKDYHRWKHUULJKWVSURYLGHGE\WKHQDWLRQDOOHJLVODWLRQRIWKHFRXQWU\LQZKLFK\RXSXUFKDVHGVXFKSURGXFW

LIMITED FIVE-YEAR WARRANTY

www.peerlessmounts.com

ISSUED 03/17/06 LIT-0190E

Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Epson Accessoires pour projecteur

Epson

Epson Duet Manuel utilisateur

Epson

Epson Mounting bracket Manuel utilisateur

Epson

Epson BrightLink Solo Interactive Module (IU-01 Manuel utilisateur

Epson

Epson BrightLink Solo Interactive Module (IU-01 Manuel utilisateur

Epson

Epson ELPMB22 Manuel utilisateur

Epson

Epson BrightLink 475Wi Manuel utilisateur

Epson

Epson PowerLite Home Cinema 700 Manuel utilisateur

Epson

Epson ELPLX02S Manuel utilisateur

Epson

Epson BrightLink 450Wi - Interactive Projector Mode d’emploi

Epson

Epson ELPMBATA - High Security - Mounting Manuel utilisateur

Epson

Epson ELPDC06 Document Camera For serial numbers beginning with LQZF - DC-06 Document... Manuel utilisateur

Epson

Epson ELPMBP02 - False Ceiling Plate Mode d’emploi

Epson

Epson PowerLite 61p Manuel d'utilisation et d'entretien

Epson

Epson 7900p - PowerLite XGA LCD Projector Manuel utilisateur

Epson

Epson PowerLite 450W Manuel utilisateur

Epson

Epson POWERLITE 8300I EMP-8300 Manuel utilisateur

Epson

Epson Panamorph ELPALK2 Manuel utilisateur

Epson

Epson ELPMB27 Manuel utilisateur

Epson

Epson ELPHB800 Manuel utilisateur

Epson

Epson ELPAF58 Manuel utilisateur

Epson

Epson ELPMB56 Manuel utilisateur

Epson

Epson ELPIU03 Manuel utilisateur

Epson

Epson EB-435W guide Manuel utilisateur

Epson

Epson ELPMB27 Instructions d'utilisation et de sécurité

Manuels Accessoires pour projecteur populaires d'autres marques

Optoma

Optoma BX-AL133B Manuel utilisateur

PEERLESS

PEERLESS PE 1120 Mode d’emploi

Osram

Osram SIRIUS HRI Series Manuel

Presentation Switchers

Presentation Switchers PS111 Manuel utilisateur

Kramer

Kramer VIA GO Manuel utilisateur

Yamaha

Yamaha PJL-112 Manuel de la liste des pièces

Swedstyle

Swedstyle CL23AA02ZA25E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 236CB Manuel du propriétaire

Acer

Acer WP100 Manuel utilisateur

i3 i3board Manuel utilisateur

CHIEF

CHIEF HB-43E Manuel utilisateur

Biamp

Biamp Modena Hub Manuel de service

NEC

NEC MP10RX Manuel utilisateur

Panamorph

Panamorph DCR-S3 Manuel utilisateur

Exact solutions

Exact solutions FRAME-EVO-P10 Manuel utilisateur

CHIEF

CHIEF VCM103S Manuel utilisateur

InFocus

InFocus LP70+ Mode d’emploi

Sharp

Sharp AN-PH20EZ Manuel utilisateur