EMC Celerra Manuel utilisateur

RSANetWitness Logs

Event Source Log Configuration Guide

EMC Celerra

Last Modified: Thursday, May 11, 2017

Event Source Product Information:

Vendor:EMC

Event Source:Celerra

Versions:7.0,7.1

RSA Product Information:

Supported On:NetWitnessSuite10.0andlater

Event Source Log Parser:celerra

Collection Method:SNMP

Event Source Class.Subclass:Storage.Storage

Configure EMC Celerra

Perform the following tasks to configure EMC Celerra to work with RSA NetWitness

Suite:

lConfigure EMC Celerra to send SNMP traps.

lConfigure EMC Celerra as an SNMP event source on RSA NetWitness Suite:

i. Add the SNMP Event Source Type

ii. Configure SNMP Users

Configure EMC Celerra to Send SNMP Traps

You have to configure your EMC Celerra event source to send SNMP traps.

To configure EMC Celerra version 7.x:

1. Log onto EMC Unisphere with your credentials.

2. On the Dashboard, click on the Celerra system from which you want to send

SNMP logs.

3. Click System > Monitoring and Alerts > Notifications.

4. Form the Event tab, click Create.

5. In the Additional notifications section, enter the following information:

lFor the Facility, choose one or more facilities for which you want to send SNMP

traps.

lFor Severity, select Info.

lFor Action, select Trap.

lFor Destination Type, enter the IP address for the RSA NetWitness Suite Log

Collector; public.

6. Click Apply, then OK to save your changes.

Add the SNMP Event Source Type

Note: If you have previously added the snmptrap type, you cannot add it again. You can

edit it, or manage users.

2Configure EMC Celerra

Event Source Log Configuration Guide

Add the SNMP Event Source Type:

1. In the RSA NetWitness Suite menu, select Administration > Services.

2. In the Services grid, select a Log Collector service.

3. Click under Actions and select View > Config.

4. In the Log Collector Event Sources tab, select SNMP/Config from the drop-down

menu.

The Sources panel is displayed with the existing sources, if any.

5. Click + to open the Available Event Source Types dialog.

6. Select snmptrap from the Available Event Source Types dialog and click OK.

7. Select snmptrap in the Event Categories panel.

8. Select snmptrap in the Sources panel and then click the Edit icon to edit the

parameters.

Add the SNMP Event Source Type 3

Event Source Log Configuration Guide

9. Update any of the parameters that you need to change.

(Optional) Configure SNMP Users

If you are using SNMPv3, follow this procedure to update and maintain the SNMP v3

users.

Configure SNMP v3 Users

1. In the RSA NetWitness Suite menu, select Administration > Services.

2. In the Services grid, select a Log Collector service.

3. Click under Actions and select View > Config.

4. In the Log Collector Event Sources tab, select SNMP/SNMP v3 User Manager from

the drop-down menu.

The SNMP v3 User panel is displayed with the existing users, if any.

5. Click + to open the Add SNMP User dialog.

4(Optional) Configure SNMP Users

Event Source Log Configuration Guide

6. Fill in the dialog with the necessary parameters. The available parameters are

described below..

SNMP User Parameters

The following table describes the parameters that you need to enter when you create an

SNMP v3 user.

Parameter Description

Username * User name (or more accurately in SNMP terminology, security

name). RSA NetWitness Suite uses this parameter and the Engine

ID parameter to create a user entry in the SNMP engine of the

collection service.

The Username and Engine ID combination must be unique (for

example, logcollector).

Engine ID (Optional) Engine ID of the event source. For all event sources

sending SNMP v3 traps to this collection service, you must add the

username and engine id of the sending event source.

For all event sources sending SNMPv3 informs, you must add just the

username with a blank engine id.

Authentication

Type

(Optional) Authentication protocol. Valid values are as follows:

lNone (default) - only security level of noAuthNoPriv can be used

for traps sent to this service

lSHA - Secure Hash Algorithm

SNMP User Parameters 5

Event Source Log Configuration Guide

Parameter Description

lMD5 - Message Digest Algorithm

Authentication

Passphrase

Optional if you do not have the Authentication Type set.

Authentication passphrase.

Privacy Type (Optional) Privacy protocol. You can only set this parameter if

Authentication Type parameter is set. Valid values are as follows:

l None (default)

l AES - Advanced Encryption Standard

l DES - Data Encryption Standard

Privacy

Passphrase

Optional if you do not have the Privacy Type set. Privacy

passphrase.

Close Closes the dialog without adding the SNMP v3 user or saving

modifications to the parameters.

Save Adds the SNMP v3 user parameters or saves modifications to the

parameters.

Trademarks

RSA, the RSA Logo and EMC are either registered trademarks or trademarks of EMC Corporation

in the United States and/or other countries. All other trademarks used herein are the property of

their respective owners.

6SNMP User Parameters

Autres manuels pour Celerra

Table des matières

Autres manuels EMC Stockage

EMC

EMC DLm120 Manuel technique

EMC

EMC Symmetrix DMX-3 Manuel utilisateur

EMC

EMC Atmos Instructions d'installation

EMC

EMC DATA DOMAIN DD620 Instructions de montage

EMC

EMC VNX5500 Manuel utilisateur

EMC

EMC CX3-10 Manuel utilisateur

EMC

EMC Disk Library DL4106 Manuel utilisateur

EMC

EMC VNX Series Manuel du propriétaire

EMC

EMC VPLEX Instructions de montage

EMC

EMC Atmos Instructions d'installation

EMC

EMC VNX Series Manuel du propriétaire

EMC

EMC Data Domain DD990 Instructions de montage

EMC

EMC Celerra NX4 Manuel utilisateur

EMC

EMC Celerra NS40 Instructions d'utilisation

EMC

EMC EMC Unity Family Manuel utilisateur

EMC

EMC VNX Series Manuel utilisateur

EMC

EMC VNX Series Manuel utilisateur

EMC

EMC Data Domain DD860 Instructions de montage

EMC

EMC EMC2 DATA DOMAIN DD660 Instructions de montage

EMC

EMC VNX5300 Block Manuel utilisateur

EMC

EMC CX500I - Insignia CLARiiON NAS Server Manuel utilisateur

EMC

EMC Celerra NS20 Manuel utilisateur

EMC

EMC CX700 Manuel technique

EMC

EMC Connectrix EC-1200 Manuel technique

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur