6
USER
INTERFACE
MENUS
1. Press the Menu button to open the main menu.
Main menu items are Picture, Function, Display Mode, Display
Setting, Select Region, Input, Audio, VGA, System, and
Information.
2. Use the and buttons to navigate to the desired menu. As you
scroll through the menus, the submenu options appear in the bar
beneath the menu item.
3. Once the menu item is highlighted, press Menu to open it.
To close the main menu and return to the main view, press the Exit
button.
SUBMENUS
1. As you scroll through the submenu functions, the current value
will appear below it.
2. Scroll to function you want to adjust, and press Menu. The value
will change to yellow.
3. Use the and buttons to change the value of the submenu
function, and press Menu. The new value will be saved, and you’ll
return to the submenu.
4. Press Exit to return to the main menu.
5. Press Exit again to close the menu. The main screen is always on.
To return to the sub menu without saving the change to the
submenu selection, press the Exit button.
FUNCTION BUTTONS
The function buttons default to the following menus:
• F1: Display Mode
• F2: Display Rotate
• F3: Safety Marker
• F4: Aspect
Pressing the function button opens the submenu for that menu
item.
To reassign menus to the function buttons, follow these steps:
1. Press and hold the function button until the function select menu
appears.
2. Press the function button repeatedly to select the desired option
or value, and press Menu to set the change and return to the
main view.
Pressing Exit before you set the value change with the Menu
button will revert to the previous value and return you to the main
view.
RESTORING THE FACTORY PRESETS
To erase all submenu changes and return to the factory presets:
1. Press Menu to open the main menu, and scroll to the System
menu. Press Menu to open the submenu.
2. Use the and buttons to select Reset in the System submenu,
and press the Menu button.
The monitor takes about 5 seconds to reset, and you will return to
the main view.
Note: Once the monitor is reset, the volume will be reset to zero.
Use the and buttons to reset to the desired audio level.
