Elvid OCM-7B-4KV2 Manuel utilisateur
USER
MANUAL
FIELDVISION
OCM-7B-4KV2
7˝4K IPS Monitor
2
3
The Elvid FieldVision 4KV2 is a lightweight 7-inch on-camera monitor
that’s capable of displaying signals up to UHD 4K (3840 × 2160) and
DCI 4K (4069 × 2160). The LCD panel’s native resolution of 1920 × 1200
provides a sharp image and facilitates precise color rendering. It offers
an aspect ratio of 16:10 (native) that you can set to your preferred size
along with four zoom presets. In addition, pixel-to-pixel mode gives you
the actual quality of 4K resolution in order to see the ne details of your
image. The FieldVision 4KV2 also accepts composite video and two-
channel audio with an A/V breakout cable (not included).
The on-screen menu makes it easy to adjust your image, and it offers
adjustments for brightness, contrast, hue, sharpness, color temperature,
and saturation. There are also broadcast-specic features like safety
frame markers and multiple display formats.
The FieldVision 4KV2 is equipped with advanced tools like Check Field to
help calibrate the monitor, a Focus Assist setting to ne-tune your focus,
and Camera mode to scale the incoming video signal when shooting on a
DSLR. Onboard programmable function buttons provide quick shortcuts
to the tools you want at your ngertips. There’s also an integrated
speaker and a 3.5 mm stereo headphone output for live audio monitoring.
A removable sunshade is included to minimize glare when shooting
outdoors.
THANK YOU FOR CHOOSING ELVID.
3
4
• Exposure to high sound levels
can cause permanent hearing
loss. Avoid listening at high
volumes for extended periods of
time.
• Keep this product away from
water and any ammable gases
or liquids.
• Do not expose this product to
humidity or extreme heat or
cold.
• Make sure this product is
powered off when plugging it
into a power source.
• Use only the correct,
recommended voltage.
• Do not attempt to disassemble
or repair this product.
• Do not place or store the
FieldVision 4KV2 facedown,
since this can damage the
screen.
• Handle this product with care.
Avoid any impacts to this
product.
• Do not block the vents in this
product.
• Disconnect this product from its
power source before storage and
during electrical storms.
• Do not use chemical solutions to
clean this product. Clean it with
only a soft, dry cloth.
• Keep this product away from
children.
• Make sure that this product
is intact and that there are no
missing parts.
• To avoid damage to this product,
be careful not to overtighten or
improperly thread any of the
threaded ttings.
• All images are for illustrative
purposes only.
PRECAUTIONS
5
TABLE OF
CONTENTS
Overview ..............................................................................................6-7
Product Contents .................................................................................. 8
Powering Options.............................................................................9-10
Using the OCM-7B-4KV2...............................................................11-12
The HDMI Lock .....................................................................................13
The Sunshade........................................................................................14
Front Panel Buttons ............................................................................15
Function Buttons .................................................................................16
The Menu ...............................................................................................17
Color Menu ......................................................................................18-19
On-screen Display (OSD) Menu .................................................20-21
Function Menu .............................................................................22-24
Function Button Shortcut Menu .....................................................25
Specications .................................................................................26-27
Troubleshooting............................................................................ 28-29
FCC Statement.....................................................................................30
Warranty................................................................................................31
6
FIELDVISION HR
4K
MODE MENU F3 F4/F2/F1
OVERVIEW
Left Nav/Vol -
Status LED
Screen
Menu button
F4 button
Up Nav/F2 button
F3 button
Right Nav/Vol +
Power button
Down Nav/F1 button
Mode button
7
USBOSDAVHDMIDC 12V
Sunshade slots
HDMI input
DC power input
HDMI lock mount
1/4″-20 threaded socket
Battery plate
Speaker
OSD controller port
Headphone jack
AV input
USB port
8
PRODUCT
CONTENTS
Note: For additional battery plates and adapters compatible with
other popular brands, visit elvidcinema.com.
·7 in. On-Camera Monitor
·Shoe-mount ball head
·Sunshade mounting frame
·Sunshade
·Mini HDMI to HDMI cable
·HDMI lock collar
·Sony L-Series battery mount
9
POWERING
OPTIONS
There are two ways to power the FieldVision 4KV2: AC power
or battery (not included).
CAMERA BATTERY
The FieldVision’s built-in battery mounting plate accommodates
a Sony L-Series–type battery.
1. Place a compatible battery in
the battery plate. Make sure
the battery’s bottom contacts
are aligned with the contacts
in the battery plate.
2. Slide the battery forward
until it locks into place. The
indicator LED will glow red
when the power source is
connected.
To install a compatible battery,
follow these steps:
10
To turn on the FieldVision 4KV2, press the power button on
the front panel of the monitor. The FieldVision 4KV2 will
turn on and enter standby mode (yellow indicator LED).
A battery monitor appears at the top of the screen and
displays the remaining battery charge.
Note: The power indicator glows red in standby mode while
connected to a power source.
AC POWER
To run the FieldVision 4KV2 with AC power, use a 12 V DC
adapter (not included) to connect the FieldVision 4KV2’s
DC power input to your AC power source.
To turn on the FieldVision 4KV2, press the power button.
The FieldVision 4KV2 will turn on and enter ready mode,
and the power indicator LED will turn green.
Table des matières
Autres manuels Elvid Moniteur
Elvid
Elvid Studiovision STV-150-4KH Manuel utilisateur
Elvid
Elvid OCM-7B-D FieldVision Manuel utilisateur
Elvid
Elvid OCM-7PWV Manuel utilisateur
Elvid
Elvid FIELDVISION OCM-89-4KH Manuel utilisateur
Elvid
Elvid RIGVISION RVM-5P-HDR Manuel utilisateur
Elvid
Elvid OCM-10-PSM Manuel utilisateur
Elvid
Elvid OCM-7P-HDR Manuel utilisateur
Elvid
Elvid StudioVision STV-280-4KHDR Manuel utilisateur
Elvid
Elvid SKYVISION WCM-55-HD Manuel utilisateur
Elvid
Elvid STUDIOVISION SRM-7X2-4KH Manuel utilisateur
