Elo TouchSystems VuPoint M-Series Manuel utilisateur

VuPoint™ M-Series Touchcomputer User Guide

VuPoint™ M-Series LCD Multi-function Touchcomputer

[19” model shown with optional accessories VuPoint M-Series]

VuPoint™ M-Series Touchcomputer User Guide ii

Elo Touch Solutions

VuPoint™ M-Series Touchcomputer User

Guide

Multi-function Touchcomputer

Revision B

SW200069

1-800-ELOTOUCH (1-800-356-8682)

www.elotouch.com

VuPoint™ M-Series Touchcomputer User Guide iii

No part of this publication may be reproduced, transmitted, transcribed, stored

in a retrieval system, or translated into any language or computer language, in

any form or by any means, including, but not limited to, electronic, magnetic,

optical, chemical, manual, or otherwise without prior written permission of Elo

Touch Solutions.

Disclaimer

The information in this document is subject to change without notice. Elo

Touch Solutions Inc. Elo Touch Solutions makes no representations or

warranties with respect to the contents herein, and specifically disclaims any

implied warranties of merchantability or fitness for a particular purpose. Elo

Touch Solutions reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of Elo Touch

Solutions to notify any person of such revisions or changes.

Trademark Acknowledgments

AccuTouch, Elo TouchSystems, Elo TouchSystems (logo), Elo, IntelliTouch,

iTouch, Elo Touch Solutions Inc., Elo Touch Solutions, and Elo Touch

Solutions (logo) are trademarks. Windows is a trademark of Microsoft

Corporation. Other product names mentioned herein may be trademarks or

registered trademarks of their respective companies. Elo Touch Solutions

claims no interest in trademarks other than its own.

VuPoint™ M-Series Touchcomputer User Guide iv

Warnings and Cautions

Warning

•Danger - Explosion hazard. Do not use in the presence of flammable

anesthetics, and other flammable materials.

•To prevent fire or shock hazards, do not immerse the unit in water or expose

it to rain or moisture.

•Do not use the unit with an extension cord receptacle or other outlets unless the

prongs of the power cord can be fully inserted.

•RISK OF ELECTRICAL SHOCK - DO NOT OPEN. To reduce the risk of

electrical shock, DO NOT remove the back of the equipment or open the

enclosure. No user-serviceable parts are inside. Refer servicing to qualified

field service engineers only.

•Uninsulated voltage within the unit may have sufficient magnitude to cause

electrical shock.

Avoid contact with any part inside the unit.

•This device complies with the electromagnetic emission and immunity

standards and is limited to the standards that are listed on pages 41 and 45.

Other devices which are not designed to withstand emission levels as

specified in the medical device standards may be susceptible to interference

from this device. Subjecting the device to conditions beyond the rated

performance capabilities may result in emissions in excess of the standard. If

it is determined that this device produces electromagnetic or other

interference it must be disconnectedfrom power until the cause of the problem

has been determined and resolved. If it is determined that this device is

functioning improperly due to electromagnetic and other interference it must be

disconnected from power until the cause of the problem has been determined

and resolved.

•Elo Touch Solutions recommends that after its useful life (or after sustaining

unrepairable damage), customers dispose of the touchcomputer and its power

supply in an environmentally sound manner. Acceptable methods include the

reuse of parts or whole products and the recycling of products, components,

and materials. Please consult and obey national state, and local laws and

ordinances governing the safe disposal of electronic equipment.

•Do not modify this equipment without authorization of the manufacturer.

This product consists of devicesthat may contain mercury, which must be recycled

or disposed of in accordance with local, state, or federal laws.

VuPoint™ M-Series Touchcomputer User Guide v

Caution

Power cord is used as a disconnection device. To de-energize

equipment, disconnect the power cord.

This unit must follow the national requirement and local state laws to

dispose unit.

Before connecting the cables to your Elo touchcomputer, make

sure all components are powered OFF.

Only approved components complying with IEC 60601-1 series can be

connected to 15MX/19MX Touchcomputer for Healthcare Applications in

Patient Environment. The use ofACCESSORYequipment not complying

with the equivalent safety requirements of this equipment may lead to a

reduced safety of the resulting system. Consideration relating to the

choices of accessory equipment should include: Use of accessory in the

patient environment.· Evidence that the safety certification of the

accessory has been performed in accordance to the appropriate IEC

60601-1 and/or IEC 60601-1-1 harmonized national standard.

For continued safety

This unit only complies to the above standards if used with a

medical grade power cord.

A medical grade power supply, such as the one specified, is

required for use in a medical application.

Please do not touch the patient and the touchcomputer output

connecter at the same time.

The touchmonitor is to be used with following adaptor:

1. XP Power / AHM85PS12

2. Elo Touch Solutions / FSP110-RAAM

Disposing of your old product

Within the European Union

EU-wide legislation, as implemented in each Member State, requires that

waste electrical and electronic products carrying the mark (left) must be

disposed of separately from normal household waste. This includes monitors

and electrical accessories, such as signal cables or power cords. When you

need to dispose of your display products, please follow the guidance of your

local authority, or ask the shop where you purchased the product, or if

applicable, follow any agreements made between yourself and the supplier of

this product.

The mark on electrical and electronic products only applies to the current

European Union Member States.

Elo Touch Solutions recommends that after its useful life (or after sustaining

unrepairable damage), customers dispose of the touchcomputer and its power

supply in an environmentally sound manner. Acceptable methods include the

reuse of parts or whole products and the recycling of products, components,

and materials. Please consult and obey national, state, and local laws and

ordinances governing the safe disposal of electronic equipment.

VuPoint™ M-Series Touchcomputer User Guide vi

Explanation of Symbols:

•This symbol alerts the user to important information concerning the operation and

maintenance of this unit, which should be read carefully to avoid problems.

• This symbol means DC Current.

•This symbol means ON/OFF stand-by switch.

•Consult instructions for use.

Medical and Healthcare Application Disclaimer:

It is the sole responsibility of any person intending to commercialize, market or

use any of Elo Touch Solutions, Inc. products for medical or healthcare

applications to ensure that such product is adequate and appropriate for

the person's intended use and complies with all applicable laws, regulations,

codes and standards including but not limited to the European Union Medical

Device Directive, United States Federal Food, Drug, and Cosmetic Act,

regulations of the United States Food and Drug Administration (FDA), and for

obtaining and maintaining any required regulatory approvals including but not

limited to anyrequired market clearances. Elo has not sought nor received any

rulings from the FDA or any other federal, state, or local government agency or

notified body as to the safety, effectiveness or appropriateness of its product

for such applications. Persons intending to evaluate or use Elo's product for

medical or healthcare purposes must rely on their own medical and legal

judgment without any representation on the part of Elo.

VuPoint™ M-Series Touchcomputer User Guide vii

Classification

With respect to electrical shock, fire in accordance with ANSI/AAMI ES60601-1 and

CAN/CSA-C22.2 No. 60601-1

E354528

07EG This touchcomputer is a Class I (GROUNDED) DEVICE.

This touchcomputer is classified NO APPLIED PARTS EQUIPMENT.

Protection against harmful ingress of water:

INGRESSPROTECTION(IP21)

This touchcomputer shall be classified as ORDINARY EQUIPMENT, not

intended or evaluated for use in the presence of flammable anesthetic mixture

with air, oxygen, or nitrous oxide.

Mode of Operation: CONTINUOUS OPERATION.

Environmental conditions for transport and storage

Temp.

Operating

0°C to 35°C

Storage / Transportation

-30°C to 60°C

Humidity (non-condensing)

Operating

20% to 80%

Storage / Transportation

5% to 95%

Altitude

Operating

0to2,000m

Storage / Transportation

0to12,192m

15MX/19MX Touchcomputer for Healthcare Applications is intended for general use in

hospital environment for data collection and display for reference. It shall not be used with

life-supporting system

For full Product Specifications refer to Appendix C

VuPoint™ M-Series Touchcomputer User Guide viii

European Standards and Classifications

Standards: EN 60601-1-2: 2007

The EMC limits and test methods are referred to the following standards:

Emission:

Immunity

CISPR 11: 2009+A1:2010

IEC 61000-4-2: 2008

EN55011: 2009+A1: 2010

(Group 1, Class A)

IEC 61000-4-3: 2006+A1:2007+A2:2010

IEC 61000-3-2:

2005+A1:2008+A2:2009

IEC 61000-4-4: 2011

IEC 61000-3-3; 2008

IEC 61000-4-5: 2005

IEC 61000-4-6: 2008

IEC 61000-4-8: 2009

IEC 61000-4-11: 2004

VuPoint™ M-Series Touchcomputer User Guide ix

Guidance and manufacturer’s declaration-electromagnetic

immunity for all EQUIPMENT AND SYSTEMS

Guidance and manufacturer’s declaration-electromagnetic

emissions

The 15MX/19MX Touchcomputerfor Healthcare Applications is intended for use in the

electromagnetic environment specified below. The customer or the user of the 15MX/19MX

Touchcomputer for Healthcare Applications should assure that it is used in such an

environment.

Emissions test

Compliance

Electromagnetic environment-guidelines

RF emissions

CISPR 11

Group1

The 15MX/19MX Touchcomputer for Healthcare

Applications uses RF energy only for its internal

function. Therefore, its RF emissions are very

low and are not likely to cause any interference

in nearby electronic equipment.

RF emissions

CISPR11

Class A

The 15MX/19MX Touchcomputer for Healthcare

Applicationsis suitable for use in all establishments

other than domestic and those directly connected

to a low voltage power supply network which

supplies buildings used for domestic purposes.

Harmonics emissions

IEC 61000-3-2

Not applicable

Voltage fluctuations/

flicker emissions

IEC 61000-3-3

Complies

VuPoint™ M-Series Touchcomputer User Guide x

Guidance and manufacturer’s declaration-electromagnetic

immunity for all EQUIPMENT AND SYSTEMS

Guidance and manufacturer’s declaration-electromagnetic immunity

The 15MX/19MX Touchcomputerfor Healthcare Applications is intended for use in the electromagnetic

environment specified below. The customer, or the user of the 15MX/19MX Touchcomputer for Healthcare

Applications, should assure that it is used in such an environment.

Immunity Test

IEC 60601

Compliance Level

Electromagnetic Environment-

Guidelines

Electrostatic Discharge

(ESD)

IEC 61000-4-2

± 6 kV contact

± 8 kV air

± 6 kV contact

± 8 kV air

Floors should be wood,

concrete or ceramic tile. If floors

are covered with synthetic

material, the relative humidity

should be at least 30%.

Electrical Fast

Transient/Burst

IEC 61000-4-4

± 2 kV for power

supply lines

± 1 kV for input/output

lines

2 kV for power supply

lines

± 1 kV for input/output

lines

Mains power quality should be

that of a typical commercial or

hospital environment.

Surge

IEC 61000-4-5

± 1 kV line(s) to

line(s)

± 2 kV line(s) to earth

± 1 kV line(s) to

line(s)

± 2 kV line(s) to earth

Mains power quality should be

that of a typical commercial or

hospital environment.

Voltage Dips, Short

Interruption and Voltage

Variations on Power

Supply Input Lines

IEC 61000-4-11

<5% UT

(>95% dip in UT)

for 0.5 cycle

40% UT

(60% dip in UT)

for 5 cycles

70% UT

(30% dip in UT)

for 25 cycles

<5% UT

(>95% dip in UT)

for 250 cycles

<5% UT

(>95% dip in UT)

for 0.5 cycle

40% UT

(60 % dip in UT)

for 5 cycles

70% UT

(30% dip in UT)

for 25 cycles

<5% UT

(>95% dip in UT)

for 250 cycles

Mains power quality should be

that of a typical commercial or

hospital environment. If the user

of the 15MX/19MX Touchcomputer

for HealthcareApplications

requires continued operation

during power mains interruptions,

It is recommended that the

15MX/19MX Touchcomputer for

Healthcare Applications be

powered from an uninterruptible

power supply or a battery.

Power Frequency

(50/60 Hz) Magnetic

Field

IEC 61000-4-8

3 A/m

Power frequency magnetic

fields should be at levels

characteristic of a typical

location in a typical commercial

or hospital environment.

NOTE UT is the A.C. mains voltage prior to application of the test level.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Elo TouchSystems écran tactile

Elo TouchSystems

Elo TouchSystems 1515L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Entuitive 1925L Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 2240L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 19R SERIES Manuel utilisateur

Elo TouchSystems

Elo TouchSystems E421137 Manuel utilisateur

Elo TouchSystems

Elo TouchSystems ET1724L-7SWR-1-NL, ET1724L-8SW Manuel utilisateur

Elo TouchSystems

Elo TouchSystems LCD Touchmonitor and Touch Driver Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1528L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1938L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 3000 Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 3201L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1929LM Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Entuitive 1746L Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 2243L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1729L Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems 1900L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 2020L Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems 1000 Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems TouchSystems 0700L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 3200L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1928L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1928LM Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1919L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1543L Manuel utilisateur

Manuels écran tactile populaires d'autres marques

Elecro Engineering

Elecro Engineering Poolsmart Plus Instructions d'installation

Johnson Controls

Johnson Controls IQ4 HUB Manuel utilisateur

Duratec

Duratec S15 Manuel utilisateur

Crestron

Crestron TPMC-3SM Manuel utilisateur

Racelogic

Racelogic MFD Touch Manuel utilisateur

J2 580 Guide de l'utilisateur

HAI

HAI OmniTouch 10p Manuel utilisateur

panel

panel PC PSR108-FM Series Manuel utilisateur

Tipro

Tipro FREE+ Manuel utilisateur

Systemline

Systemline Commander Manuel utilisateur

Interactive Technologies

Interactive Technologies Insite Manuel utilisateur

GVision

GVision Legacy Manuel utilisateur

BeiJer

BeiJer T21C-C24 Manuel utilisateur

Advantech

Advantech ITM-5117 Series Manuel utilisateur

Edge

Edge CS Manuel utilisateur

Vimar

Vimar 01420.B Manuel utilisateur

iSMA

iSMA iSMA-D-PD10C-B1 Manuel utilisateur

UTC Fire and Security

UTC Fire and Security Interlogix UX-TOUCH01 Instructions de montage