English usermanual
Product performance:
Environment comfort display: COMFORT (comfortable), WET (high humidity), DRY
(do bath).
Temperature measuring range: 0C-50C (32F-120F).
Temperature measuring accuracy: ±1,0C (1,8F).
Temperature display resolution: 0,1C (0,1F)
Humidity measuring range: 10% RH-90% RH
Humidity measuring accuracy: ±5 (400% RH-80% RH) other ±8%.
Battery: AAA 1,5V.
Time/temperature/humidity display
C/F temperature units the way self-locking switch show
Highest/lowest temperature and humidity memory function
Calendar shows that the whole point timekeeping, daily alarm functions, 12/24 hour
clock
Feature set
The basic function keys
(MODE) clock/alarm function mode switching
(ADJ) settings adjust the value of projects/on, Off alarm clock/display date
(MEMO) showed that the maximum memory, the most low-temperature, humidity
values, and clear the memory of temperature and humidity values
(C/F) self-locking switch means temperature display unit
(RESET) to clear all settings and memory data back system the initial status
Clock and date settings
Press “MODE” key to set the replacement of items:
MinutesCLOCK12/24 TimeMonth DateExitSet.
Press “ADJ” key to add one item, hold down the “ADJ” 2 second
after 8Hz Express since increasing minute second set automatically
cleared, set the month, when the day`s largest auto-adjust the number
of days, 1 minute without keys automatically exit.
Detail: According to “MODE” 2 second to enter the clock setting
mode, minutes begin blinking, press “ADJ” regulation minutes. Then
“MODE” click, clock start blinking, press “ADJ” regular clock.
Then “MODE” click conversion 12/24 hours, according to “ADJ”
regulation.
Then “MODE” about the month start flashing, press “ADJ”
regulation.
Then “MODE” about date of start blinking, press “ADJ”regulation.
Then click the “MODE” key to confirm and exit mode.
