Elko EKO01824 Manuel utilisateur

Smart Tag

Device User Guide

Information about features and functionality of the devices

10/2023

www.elko.no

Legal Information

The information provided in this document contains general descriptions, technical

characteristics and/or recommendations related to products/solutions.

This document is not intended as a substitute for a detailed study or operational and

site-specific development or schematic plan. It is not to be used for determining

suitability or reliability of the products/solutions for specific user applications. It is the

duty of any such user to perform or have any professional expert of its choice

(integrator, specifier or the like) perform the appropriate and comprehensive risk

analysis, evaluation and testing of the products/solutions with respect to the relevant

specific application or use thereof.

The ELKO brand and any trademarks of ELKO AS and its subsidiaries referred to in

this document are the property of ELKO AS or its subsidiaries. All other brands may

be trademarks of their respective owner.

This document and its content are protected under applicable copyright laws and

provided for informative use only. No part of this document may be reproduced or

transmitted in any form or by any means (electronic, mechanical, photocopying,

recording, or otherwise), for any purpose, without the prior written permission of

ELKO.

ELKO does not grant any right or license for commercial use of the document or its

content, except for a non-exclusive and personal license to consult it on an "as is"

basis.

ELKO reserves the right to make changes or updates with respect to or in the content

of this document or the format thereof, at any time without notice.

To the extent permitted by applicable law, no responsibility or liability is

assumed by ELKO and its subsidiaries for any errors or omissions in the

informational content of this document, as well as any non-intended use or

misuse of the content thereof.

Table of Contents

Safety Information.......................................................................................4

Smart Tag Energy .......................................................................................5

For your safety ...........................................................................................5

About the device.........................................................................................6

Installing the device ....................................................................................6

Supported mounting positions................................................................7

Pairing the device .......................................................................................8

Pairing device manually.........................................................................8

Pairing device with auto scan...............................................................12

Configuring the device ..............................................................................15

Tariff information .................................................................................15

Checking currency type.......................................................................19

Identifying the device ..........................................................................19

Changing the device icon ....................................................................21

Renaming the device ..........................................................................21

Personalized Energy Insights ....................................................................22

Enabling Personalized Energy Insights.................................................22

Creating/updating home profile ............................................................23

Disabling Personalized Energy Insights ................................................28

Using the device.......................................................................................29

Identifying the signal strength...............................................................29

Checking energy consumption .............................................................30

Creating an automation .......................................................................36

Removing the device ................................................................................41

LED indications ........................................................................................42

Troubleshooting .......................................................................................43

Technical data ..........................................................................................44

DUG_Smart TagE_ELKO-02 3

Safety Information

Important Information

Read these instructions carefully and look at the equipment to become familiar

with the device before trying to install, operate, service, or maintain it. The

following special messages may appear throughout this manual or on the

equipment to warn of potential hazards or to call attention to information that

clarifies or simplifies a procedure.

The addition of either symbol to a “Danger” or “Warning” safety label indicates

that an electrical hazard exists which will result in personal injury if the

instructions are not followed.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety messages that accompany this symbol to avoid possible

injury or death.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in

death or serious injury.

Failure to follow these instructions will result in death or serious injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

NOTICE

NOTICE is used to address practices not related to physical injury.

4 DUG_Smart TagE_ELKO-02

Safety Information

Smart Tag Energy

For your safety

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

Safe electrical installation must be carried out only by qualified electrical

personnel. Qualified electrical personnel must prove profound knowledge in the

following areas:

• Connecting to installation networks

• Connecting several electrical devices

• Laying electrical cables

• Safety standards, local wiring rules, and regulations

Failure to follow these instructions will result in death or serious injury.

EKO01824 EKO01825 EKO01826

EKO01951 EKO01952

DUG_Smart TagE_ELKO-02 5

Smart Tag Energy

About the device

Smart Tag E (hereinafter referred as Smart Tag) is a compact, robust, and easy-

to-install wireless communication energy sensor. It is used together with the

SmartHub to collect information from every equipped circuit to identify the energy

consumption of each connected load. It is designed specifically to manage energy

consumption for new and existing residential installations. It monitors and

measures energy and power in real-time, and also provides complete visibility of

power transfer between power source and loads.

Features of Smart Tag:

• Easily mounted with top or bottom position directly on circuit breaker.

• Measures energy consumption and real-time power.

• Sends real-time notifications and alarms to the ELKO Smart app in case of

consumption limit set by user in automation exceeds.

• Automation based on spot price.

Benefits of Smart Tag:

• Easy accessibility and fastest installation.

• Energy Class 1: accurate measurement.

• Compact and cost effective.

Installing the device

It is recommended to place the ELKO SmartHub within 3 meters where Smart

Tag is installed for best results. This provides good network signal strength and

helps to prevent online/offline issues, which might result in corrupt data.

Refer to the installation instruction supplied with this product.

Instruction manual links:

•Smart Tag EKO01824,EKO01825,EKO01826

•Smart Tag EKO01825,EKO01951,EKO01952

6 DUG_Smart TagE_ELKO-02

Smart Tag Energy

Supported mounting positions

Mounting position Smart Tag Model number

Top Smart Tag 1P+N 230 V EKO01824

Top or bottom Smart Tag 3P 230 V EKO01825

Top Smart Tag 3P+N 400 V EKO01826

Top or bottom Smart Tag Flex 1P+N 230 V EKO01951

Smart Tag Flex 3P+N 400 V EKO01952

EKO01824 - 1P+N/2P (IT network)EKO018025 - 3PEKO018026 - 3P+N

RF-Id:

E210

0000

RF-Id:

E210

000 0

V0 0 1.001.00 1

SM21 1610010000 1

EKO01951 - 1P+N (IT networ)

Un: 200-240 V

RF-Id:

E210

0000

RF-Id:

E210

0000

01.001.001

SM21 1610010000 1

RF-Id:

E210

000

RF-Id:

E210

000 0

V0 0 1.001.00 1

SM21

16100100001

U n: 3N 220-240 / 380-415 VEKO01952 - 3P+N

RF-Id:

E210

0000

RF-Id:

E210

0000

V0 0 1.001.00 1

SM21

1610010000 1

RF-Id:

E210

0000

RF-Id:

E210

0000

V0 0

1.001.00

SM21

16100100001

DUG_Smart TagE_ELKO-02 7

Smart Tag Energy

Pairing the device

Pair your Smart Tag with the ELKO SmartHub to access and control the Smart

Tag using the ELKO smart app.

• We recommend to configure your main Smart Tag as Grid on the main

incomer of the house. This helps to record the overall consumption.

NOTE:

◦Grid: main supply (referred as Grid in the app) of the house.

◦Load: power consumed from the Grid or a production source by

electrical devices such as light, water heater, and fridge.

• If you have more than one Smart Tag installed, it is recommended to pair the

main Smart Tag first and set it as Grid.

NOTE:

◦Main Smart Tag is connected to the Grid.

◦Additional Smart Tag are connected to the loads.

IMPORTANT: Smart Tag must be installed by qualified professional.

Pairing device manually

To pair the device manually:

1. On the Home page, tap +.

2. Tap , select the required ELKO SmartHub on the slide-up menu.

3. Select an option to add the device (A):

–Add Device with Install Code

–Add Device without Install Code

TIP: It is recommended to add the device with install code.

Add Device

Install Code is Recommended

Add Device with Install Code

Add Device without Install Code

To enhance network security, we strongly

recommend using the install code to add a

device.

If you are unable to scan or type the install

code, you can still add the device without it.

8 DUG_Smart TagE_ELKO-02

Smart Tag Energy

4. To pair the device with install code, tap Add Device with Install Code to

display the slide-up menu. Select any one of the options (B):

–Scan Install Code: you can scan the device for the install code. Position

your camera to scan the QR code or barcode available on the Smart Tag.

–Enter Install Code Manually: you can manually enter the install code on

the device.

After adding the device with Install Code, proceed to Step 6.

5. To pair the device without install code, tap Add Device without Install Code.

6. Select Confirm LED is blinking amber > Start Configuration (C).

NOTE: Smart Tag must be connected to the MCB and powered ON.

7. Wait for a few minutes for the app to connect with your Smart Tag.

Once Smart Tag is added, tap Done.

8. On the configuration page, tap on the Smart Tag to configure.

Add Device

Install Code is Recommended

Add Device with Install Code

Add Device without Install Code

To enhance network security, we strongly

recommend using the install code to add a

device.

If you are unable to scan or type the install

code, you can still add the device without it.

Enter Install Code Manually

Scan Install Code

Cancel

Ensure that the device is connected to the

DUG_Smart TagE_ELKO-02 9

Smart Tag Energy

9. Tap Upgrade, to update to the latest version and unlock the respective

features.

NOTE: By default, the first two steps will be completed for new users.

10. Once all upgrade steps are completed, you will get a pop-up notification. Tap

Confirm, to open settings page.

11. On the settings page, tap (D) to select the type.

12. Select the type from the list based on the usage and appliance, then tap

Confirm.

IMPORTANT: It is mandatory to configure a Smart Tag as Grid on the

main incomer of the house.

History

Settings

Smart Tag

Grid

What's new?

App Update

Update your app to enjoy the new app

design and features.

Step 1:

Hub & Firmware Upgrade

latest version and unlock the new app features.

Step 2:

SmartTag Upgrade

Update your SmarTag to the latest

version and unlock the new features.

Step 3:

Upgrade

Settings

Identify

Save

10 DUG_Smart TagE_ELKO-02

Smart Tag Energy

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Elko Relais

Manuels Relais populaires d'autres marques

Shelly

Shelly Pro Series Manuel utilisateur

GE MVAX 11 Manuel utilisateur

ABB

ABB RELION REF615R Manuel utilisateur

Pilz

Pilz PNOZ X10 Manuel du propriétaire

ABB

ABB SPAJ 142 C Manuel de la liste des pièces

Kemo Electronic

Kemo Electronic B197 Manuel utilisateur

Seg

Seg MRM3 Manuel utilisateur

Basler

Basler BE1-700C Manuel utilisateur

CD Automation

CD Automation REVEX 2PH 280A Manuel utilisateur

Ruelco

Ruelco 1S04 Manuel utilisateur

Basler

Basler V3E Z1P B2C1F Manuel utilisateur

Doepke

Doepke Dupline DSM 2 Manuel utilisateur

Siemens

Siemens SIRIUS 3RT1966-4D Manuel utilisateur

GE DGP Manuel utilisateur

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Manuel utilisateur

Siemens

Siemens SIPROTEC 4 Manuel utilisateur

Siemens

Siemens BD2-AK03X/FS Series Manuel utilisateur

Leuze

Leuze MSI-SR5B Manuel utilisateur