8
CFW-08 - QUICK PARAMETER REFERENCE
Parameter Function Adjustable Range Factory Unit User Page
Setting Setting
(*) The factory default of parameter P136 depends on the inverter model as follows:
- models 1.6-2.6-4.0-7.0 A/200-240 V and 1.0-1.6-2.6-4.0 A/380-480 V: P136 = 5.0 %;
- models 7.3-10-16 A/200-240 V and 2.7-4.3-6.5-10 A/380-480 V: P136 = 2.0 %;
- models 22-28-33 A/200-240 V and 13-16-24-30 A/380-480 V: P136 = 1.0 %.
Speed Limits
P133 Minimum Frequency (Fmin) 0.00 to P134 3.00 Hz
P134 Maximum Frequency (Fmax) P133 to 300.0 66.00 Hz
V/F Control
P136 (2) (*) ManualTorqueBoost 0.0 to 30.0 5.0 or %
(IxRCompensation) 2.0 or
1.0 (*)
P137 (2) AutomaticTorque Boost 0.00 to 1.00 0.00 -
(AutomaticIxR Compensation)
P138 (2) SlipCompensation 0.0 to 10.0 0.0 %
P142 (2) (3) Maximum Output Voltage 0 to 100 100 %
P145 (2) (3) FieldWeakening P133 to P134 50.00Hzor Hz
Frequency(Fnom) 60.00 Hz
depending
on the
market
DC Link Voltage Regulation
P151 DCLinkVoltageRegulation 200 V models: 325 to 410 380 V
Level 400 V models: 564 to 820 780
Overload Current
P156 MotorOverloadCurrent 0.2xInom to 1.3xInom 1.2xP401 A
Current Limitation
P169 Maximum Output Current 0.2xInom to 2.0xInom 1.5xP295 A
Flux Control
P178 (1) Rated Flux 50.0 to 150 100 %
CONFIGURATION PARAMETERS - P200 to P398
Generic Parameters
P202 (3) ControlMode 0 = Linear V/F Control 0 -
(Scalar)
1 = Quadratic V/F Control
(Scalar)
2 = Sensorless Vector Control
P203 (3) Special Function Selection 0 = No function 0 -
1 = PID Regulator
P204 (3) Load Factory Setting 0 to 4 = No Function 0 -
5 = Loads Factory Default
P205 DisplayDefault Selection 0 = P005 2 -
1 = P003
2 = P002
3 = P007
4, 5 = Not Used
6 = P040
P206 Auto-ResetTime 0 to 255 0 s
P208 ReferenceScaleFactor 0.00 to 99.9 1.00 -
P212 Frequency to Enable the Sleep 0.00 to P134 0.00 Hz
Mode
P213 Time DelaytoActivate the 0.1 to 999 2.0 s
SleepMode
P215 (3) (4) Keypad Copy Function 0 = Not Used 0 -
1 = Copy (inverter keypad)
2 =Paste (keypad inverter)
P219 (3) Switching Frequency 0.00 to 25.00 6.00 Hz
Reduction Point
