Elite Screens QuickStand Series Manuel utilisateur

Rev043010-JA

www.elitescreenscom info@elitescreens.com

QuickStand Series

Portable Frame-Folding Projection Screen

User’s Guide

Rev043010-JA

www.elitescreenscom info@elitescreens.com

Setup Procedure

The frame and supports are made of 1 3/8” aluminum tubing with an anodized finish. Please follow the

instructions in this package. With proper care, your QuickStand screen will provide many years of reliable

service.

fig 2

Top

fig 1

fig 3

Lock down the corners

Snap latch

Top

Two Section Frame

(For presentation screens that are less than 120” in diagonal

measurement)

1. Take the frame out of the case and remove its wrappings.

Unfold the main joints as shown in (fig 1).

2. Once the main joints are unfolded, make sure that the snap

latches “click” into the locked position. The frame should now

be fully elongated as in (fig2). *Note: The snap latches will

automatically lock when the joint is straightened. Press the

snap latch button in order to release the lock.

3. While holding the bottom of the frame in place, lift the top of

the frame to unfold the sides which will cause the snap latches

lock when fully extended. Secure the corner braces into the

locked position. The screen frame should now be fully opened

as in (fig 3).

Rev043010-JA

www.elitescreenscom info@elitescreens.com

Three Section Frame

(For large presentation screens that are 120” or more in diagonal

measurement)

1. Take the frame out of the case and remove its

wrappings. Unfold the main joints making sure that

both the end and middle spans are in prefect alignment

as shown in (fig 4).

2. Make sure that the snap latches have locked the joints in

the frame so that it is at its full horizontal extension as

shown in (fig 5)

3. While holding the bottom of the frame in place, lift the

top of the frame to unfold the sides which will cause the

snap latches lock when fully extended. Secure the

corner braces into the locked position. The screen frame

should now be fully opened as in (fig 6).

fig 6

Lock down the corners

Snap latch

Top

fig 4

Rev043010-JA

www.elitescreenscom info@elitescreens.com

fig 7

Standard T-Leg Support

1. Take the T-Leg out of the case and remove its wrappings.

Fold down the support legs as shown in (fig 7).

2. Secure the corner braces into the locked position as

shown in (fig 8)

3. Unfold the T-Leg’s main support until the snap latches

“click” into the locked position as in (fig 9).

fig 8

Lock down the corners

fig 9

Snap latch

Rev043010-JA

www.elitescreenscom info@elitescreens.com

locking bolt

frame spacer

fig 12

fig 10

AT-Leg (optional support buttress recommended for the large

screens with diagonal measurements of 150” and over)

1. Take the AT-Leg buttress out of the case and remove its wrappings. Unfold the buttress as shown in (fig 10).

2. Snap latches will automatically lock in the center joint. Use the snap latch buttons to unlock the end joints as

shown in (fig 11).

3. Attach the AT-leg to the T-Leg by securing the locking bolts through the frame using the frame spacers

between the metal parts as shown in (fig 12) (*Note: It is important to always use the plastic frame spacers

between the pieces whenever connecting any of the aluminum surfaces such as T-bars to AT, SAT and Frame

components.)

fig 11

Snap latch

Rev043010-JA

www.elitescreenscom info@elitescreens.com

locking bolt

frame spacer

fig 15

SAT-Leg (optional added stability buttress recommended for the

large screens with diagonal measurements of 180” and over)

1. Take the SAT-Leg out of the case and remove it wrappings as shown in (fig13).

2. Undo the snap locks to loosen and bend the joints for proper fitting as shown in (fig 14).

3. Attach the SAT-Legs by securing the locking bolts through the frame using the frame spacers between

the metal parts as shown in (fig 15)

fig 13

fig 14

Rev043010-JA

www.elitescreenscom info@elitescreens.com

Folding the Screen material for proper packing

Please observe the following precautions before folding up the screen material.

1. Do not bring the viewing surface into contact with chemical solvents, sharp or abrasive objects,

painted, varnished or plastic finished items.(*See the cleaning instructions for exceptions to this)

2. Make certain that the screen is laid out on a dry, clean and flat surface.

Folding up the screen:

Lay out the screen with the viewing surface facing up and cover it with flat (not crumpled) tissue or packing

paper that is clean and unprinted. *Note: Do not ever use abrasive paper, newspaper or any printed

material on your projection screen.

1. With the viewing surface facing up, fold the fabric in half from top to bottom. When folding, make

certain that the viewing surface does not come into contact with the black binding, grommets or snap

buttons. *Note: The screens are shipped from production with tissue paper in the folds that should be

retained for future use.

Attaching the Frame to its Supports

1. Always use at least two locking bolts through the T-Leg Support, the Spacer and into the Frame on each

side.

2. Height can be adjusted in 8” increments up or down. Normal screen height is 44” from the bottom of the

frame to the floor.

3. Reverse this process to dismantle and pack away the screen.

locking bolt

frame

leg

frame spacer

snap latch button

Rev043010-JA

www.elitescreenscom info@elitescreens.com

2. Make sure that the first folds never exceed 3 feet in width (fold again if necessary). Also make sure

that there is always clean packing paper in between the two surfaces.

3. Larger sized screens will need to be folded with more frequency than smaller screens. Follow the

instructions from step 1 as well.

4. Fold the material from top to bottom first then alternate in folding left to right until the material is of a

sufficient size that will fit into the leatherette case.

Note: Keep the screen material inside its case when not

in use. Failure to follow this precaution may eventually

result in staining or discoloration.

Cleaning

The screen surface can be cleaned as follows.

Use a clean white cloth (100% cotton preferred) and dampen it with clear water. Gently wipe in one direction

and NOT in a circular motion. Use another dry cloth to dry after each cleaning session. To remove a

stubborn stain or sticky surface, use denatured alcohol (methanol or methyl alcohol) in lieu of water.

Attaching the Screen once it is unpacked

1. Using the snap buttons to connect the Screen material with the case

2. Start at the top working in whatever direction is most comfortable to you

3. Stretch the corners if necessary to pair up the buttons with their corresponding snaps

Rev043010-JA

www.elitescreenscom info@elitescreens.com

The following points should be noted to assure the sound performance and longevity of

your screen

1. Never use your hand to touch the screen surface.

2. Never scrabble on the screen with anything.

3. Don't touch the screen with hard or sharp objects.

4. Please use a clean cotton cloth or soft dust brush to remove any dust particles on the screen.

5. The screen material may be cleaned

Warranty Policy

Two (2) year parts and labor warranty from defects in workmanship from purchase date (except for

refurbished units as specified below):

Refurbished units carry a 90-day parts and labor warranty.

Each party will be responsible for one way shipping during regular warranty period. Elite Screens is not

responsible for applicable international tariffs such as broker fees and customs duties.

An RMA (Return Merchandise Authorization) number must be issued in order to process a replacement.

Elite Screens will either replace or repair the defective unit with a brand new replacement *(see exceptions

below) after the defective unit is received and/or confirmed defective. Once the product is received, Elite

Screens will send out a new *unit to the customer by ground service (subject to inventory availability).

Please do not return any unauthorized items to Elite Screens, as they will be refused. The RMA

number must be included on the outside label of your shipping box. Our warehouse is not

authorized to accept returns thout an RMA number on the shipping label. RMA numbers are

valid for 45 days from the date of issue.

Missing Parts must be reported within the 7-days of receipt. If reported after 7 days, customer will only be

responsible for shipping and handling fees. If reported after 30 days of receipt, the customer is responsible

for cost of the parts and shipping & handling fees.

*A new or refurbished replacement will be sent out to the customer depending on the type of purchase (new or

refurbished) and is based on stock availability.

For Warranty and Service requests please fill out a RMA /Service Form at

http://www.elitescreens.com/warrantysupportform

Please Visit this link for full Warranty information:

http://www.elitescreens.com/warranty

Remember to register your Elite Screens product at:

www.elitescreens.com/register

Parts List

1. Frame x 1 piece

2. Support (T) Legs x 2 pieces

3. AT-Legs x 2 pieces (optional depending on size)

4. SAT-Legs x 2 pieces. (optional depending on size)

5. Screen Fabric x 1 piece

6. Locking Bolt x 6-26 pieces

7. Frame Spacer x 6-26 pieces

8. User Guide x 1 pieces

Please make sure all parts listed are supplied. Should any parts be missing contact us

at service@elitescreens.com

Rev043010-JA

www.elitescreenscom info@elitescreens.com

CONTACTS

US & Canada Tech Support & Warranty Claim

Please contact us at service@elitescreens.com or call +1 877-511-1211 #3 Service

Europe Tech Support & Warranty Claim

Please contact us at service@elitescreens.eu or call +49-(0) 40-30392958

Asia Tech Support & Warranty Claim

Please contact us at service@elitescreens.com.cn or call +86-(0) 755-8461-7989

Taiwan Tech Support & Warranty Claim

Please contact us at service@elitescreens.com.tw or call +886-(02) 2747-8979

America:

Elite Screens Inc.

16410 Manning Way

Cerritos, CA 90703 USA

Tel: +1-562-483-8198

Fax: +1-562-483-8498

[email protected]

www.elitescreens.com

Asia:

Elite Screens China Corp.

Longxi Duimianling Industry Zone

Longcheng Longgang District,

ShenZhen GuangDong, China

Tel: +86-(0)755-8461-7989

Fax: +86-(0)755-8461-7669

[email protected].cn

www.elitescreens.com.cn

Taiwan:

Elite Screens Taiwan Co. Ltd.

No.38, Alley 22, Lane 66,

Sec. 5, Nanjing E. Rd.,

Songshan District, Taipei City 105,

Taiwan

Tel: +886-(02)2747-8979

Fax: +886-(02)2747-8978

[email protected].tw

www.elitscreens.com.tw

Europe:

Elite Screens Europe GmbH

Lübecker Straße 1

22087 Hamburg, Germany

Tel: +49-40-30392494

Fax: +49-40-49219200

[email protected]

www.elitescreens.eu

Elite Screens France S.A.S

11, Allée William Penn

92150 Suresnes, France

Tel: +33-1-45064735

Fax: +33-1-45064735

pascale.dautemer@elitescreens.com

www.elitescreens.com/fr

Latin America Contact:

[email protected]om

East Asia Contact:

[email protected]

Japan Contact:

info.japan@elitescreens.com

Autres manuels pour QuickStand Series

Table des matières

Autres manuels Elite Screens Écran de projection

Elite Screens

Elite Screens M100S Manuel utilisateur

Elite Screens

Elite Screens ZWBMS-58 Manuel utilisateur

Elite Screens

Elite Screens TE100HC2 Manuel utilisateur

Elite Screens

Elite Screens VMAX180XWV Manuel utilisateur

Elite Screens

Elite Screens Aeon AR150WH2 Manuel utilisateur

Elite Screens

Elite Screens Insta-DEM Series Manuel utilisateur

Elite Screens

Elite Screens TE100HC2 Manuel utilisateur

Elite Screens

Elite Screens Evanesce AcousticPro UHD Series Manuel utilisateur

Elite Screens

Elite Screens VMAX113XWS Manuel

Elite Screens

Elite Screens VMAX Tab-Tension Dual Series Manuel utilisateur

Elite Screens

Elite Screens TE100HC3 Manuel du propriétaire

Elite Screens

Elite Screens VMAX PLUS 4 SERIES Manuel utilisateur

Elite Screens

Elite Screens Evanesce Tension Series Manuel utilisateur

Elite Screens

Elite Screens B SERIES Manuel d'instructions

Elite Screens

Elite Screens Elite Tripod Series Manuel utilisateur

Elite Screens

Elite Screens Pop-Up Cinema Series Manuel utilisateur

Elite Screens

Elite Screens Evanesce Tension Series Manuel utilisateur

Elite Screens

Elite Screens Manual Series Manuel utilisateur

Elite Screens

Elite Screens Evanesce Tension Series Manuel utilisateur

Elite Screens

Elite Screens Starling Tab-Tension 2 Series Mode d’emploi

Elite Screens

Elite Screens Aeon CLR 3 Series Manuel utilisateur

Elite Screens

Elite Screens Home100IWH2-A Manuel

Elite Screens

Elite Screens Kestrel Home Series Manuel utilisateur

Elite Screens

Elite Screens Home100IWH2-A Manuel utilisateur

Manuels Écran de projection populaires d'autres marques

FART PRODUKT

FART PRODUKT Standard SCREEN Manuel utilisateur

Draper

Draper E Series Manuel

Laarhoven

Laarhoven Companion II Manuel utilisateur

Renogy

Renogy RMS-LFPS-US Manuel utilisateur

Da-Lite

Da-Lite ExecutiveElectrol Manuel utilisateur

Samsung

Samsung S*H65* Manuel utilisateur

FONESTAR

FONESTAR PPTR-43100-FA Manuel utilisateur

Slide Clear

Slide Clear Varro XL Manuel utilisateur

OS РХ-090Н Manuel utilisateur

Niko

Niko 10-845 Manuel utilisateur

Speaka Professional

Speaka Professional 2357532 Manuel d'utilisation

Sima

Sima XL-72 Manuel utilisateur

Jasic

Jasic EVO 2.0 ET-200P Manuel utilisateur

InFocus

InFocus SC-WALL GRY-92H Manuel

Barco

Barco OverView MVL-615 Manuel utilisateur

Draper

Draper Envoy Manuel

SI Dynamic 2 XL Manuel utilisateur

Draper

Draper Nocturne+ E Instructions d'installation