Elite Screens QuickStand Series Manuel utilisateur

Folding Presentation Screen

QuickStand

Series

Users Guide

Setup Procedure

The frame and supports are made of 1 3/8” aluminum tubing with an anodized finish. Please follow the instructions in

this package. With proper care, your QuickFold screen will provide many years of reliable service.

Two

Section

Frame

(For presentation screens that are less than 120” in diagonal measurement)

1. Take the frame out of the case and remove its wrappings. Unfold the

main joints as shown in (fig 1).

2. Once the main joints are unfolded, make sure that the snap latches

“click” into the locked position. The frame should now be

fully elongated as in (fig2). *Note: The snap latches will

automatically lock when the joint is straightened. Press the snap latch button in

order to release the lock.

3. While holding the bottom of the frame in place, lift the

top of the frame to unfold the sides which will cause

the snap latches lock when fully extended. Secure the

corner braces into the locked position. The screen frame should

now be fully opened as in (fig 3).

fig 1

Top

fig

Top

Snap

latch

Lock

down

the

corners

Snap

latch

fig

Three

Section

Frame

(For large presentation screens that are 120” or more in diagonal

measurement)

1. Take the frame out of the case and

remove its wrappings. Unfold the main joints

making sure that both the end and middle spans are in

prefect alignment as shown in (fig 4).

2. Make sure that the snap latches have locked the joints in

the frame so that it is at its full horizontal extension as

shown in (fig 5)

3. While holding the bottom of the frame in place, lift the

top of the frame to unfold the sides which will cause the

snap latches lock when fully extended.

Secure the corner braces into the locked position. The

screen frame should now be fully opened as in (fig 6).

fig

Top

fig

Top

Snap

latch

Snap

latch

Lock

down

the

corners

fig

Standard

T-Leg

Support

1. Take the T-Leg out of the case and remove its wrappings.

Fold down the support legs as shown in (fig 7).

2. Secure the corner braces into the locked position as shown

in (fig 8)

3. Unfold the T-Leg’s main support until the snap latches

“click” into the locked position as in (fig 9).

fig 7

Lock

down

the

corners

fig

Snap

latch

fig 9

快折幕腿架方法順序

`圖1 、2、3腿架展開。注意夾傷，夾物

Following steps 1,2,3 below, use caution during attachment.

展開 unfold

圖2、3滑道是來調解杆的長短，最後用

鬆緊調解頭鬆緊

Fig2 ,3 adjust the height of the frame and then tighten the connection screws.

展開unfold

（1）

活動關節

Connectionscrews

滑道 removableframe

（2）

展開 unfold

Lockdownthecorners lockingbolt

Snaplatch Adjustingscrews

滑道 removable frame

(3)

Attaching the Frame to its Supports

1. Always use at least two locking bolts through the T-Leg Support, the Spacer and into the Frame on each side.

2. Height can be adjusted in 8” increments up or down. Normal screen height is 44” from the bottom of the frame to

the floor.

3. Reverse this process to dismantle and pack away the screen.

ocki

bol

frame

leg

snap

latch

button

(unfold) 展开

按压红色按扭(Press)

Folding the Projection Surface for Packing

Please observe the following precautions before folding up the screen material.

1. Do not bring the viewing surface into contact with chemical solvents, sharp or abrasive objects, painted,

varnished or plastic finished items.(*See the cleaning instructions for exceptions to this)

2. Make certain that the screen is laid out on a dry, clean and flat surface.

Folding up the screen:

Lay out the screen with the viewing surface facing up and cover it with flat (not crumpled) tissue or packing paper that is

clean and unprinted. *Note: Do not ever use abrasive paper, newspaper or any printed material on your projection

screen.

1. With the viewing surface facing up, fold the fabric in half from top to bottom. When folding, make certain that

the viewing surface does not come into contact with the black binding, grommets or snap buttons. *Note: The

screens are shipped from production with tissue paper in the folds that should be retained for future use.

2. It is preferable to make sure that the first folds never exceed 3 feet in width (fold again if necessary). Also make

sure that there is always clean packing paper in between the two surfaces.

3. Larger sized screens will need to be folded with more frequency than smaller screens. Follow the instructions

from step 1 as well.

4. Fold the material from top to bottom first then alternate in folding left to right until the material is of a sufficient

size that will fit into the leatherette case.

Note:

Keep

the

screen

material

inside

its

case

when

not

use.

It will help protect the material from damage..

Cleaning

The screen surface can be cleaned as follows.

Use a clean white cloth (100% cotton preferred) and dampen it with clear purified water. Gently wipe in one direction

and NOT in a circular motion.

Use another dry cloth to dry after each cleaning session.

To remove a stubborn stain or sticky surface, use denatured alcohol (methanol or methyl alcohol) in lieu of water.

Attaching the Screen once it is unpacked

1. Use the snap buttons to connect the Screen material with the frame.

2. Start at the top working in whatever direction is most comfortable to you.

3. Stretch the corners if necessary to pair up the buttons with their corresponding snaps.

Packing List

1. Frame 1 piece

2. Support (T) Legs 2 pieces

3. AT-Legs 2 pieces (optional depending on size)

4. SAT-Legs 2 pieces. (optional depending on size)

5. Screen Fabric 1-2 pieces

6. Locking Bolt 6-26 pieces

7. Frame Spacer 6-26 pieces

8. Manual 1 piece

The

following

points

should

noted

assure satisfactory

performance

and

longevity

your screen

1. Never use your exposed hand to touch the screen surface because of grease from the skin.

2. Never scrabble on the screen with anything.

3. Don't touch the screen with hard or sharp objects.

4. Please use a clean cotton cloth or soft dust brush to remove any dust particles on the screen.

5. The screen material may be cleaned but care is required to avoid damage.

US and Canada Warranty Policy –

Two (2) year warranty parts and labor from purchase date as follows (except for refurbished units as specified below):

•Refurbished units carry a 90-day parts and labor warranty.

•Demo units or open box items are AS IS items and do notcarry a warranty.

•Each party will be responsible for one way shipping during the warrantyperiod.

•DOA (Defective On Arrival): Must be reported within 7 business days of receipt. A RMA (Return Merchandise

Authorization) number must be issued in order to process a replacement. Elite Screens will replace the DOA (Defective

On Arrival)unit witha brand new replacement *(seeexceptions below) after the DOA unit is receivedand/or confirmed

defective. Once the product is received, Elite Screens will send out a new *unit to the customer by ground service

(subject to inventory availability). Should a problem be reported after the 7-day grace period, the item must be shipped

to us for warranty repair.

•Missing Parts must be reported within the 7-day (DOA) grace period. If reported after 7 days, customer will be only

be responsible for shipping and handling fees. If reported after 30 days of receipt, customer is responsible for cost of

the parts and shipping & handling fees.

•All shipping damages must be reported with in 7 business days upon receipt of the product.

After 7 days, the Customer is responsible for all incurred costs.

•Inspect all shipments upon arrival. If damage or loss is apparent upon delivery do not accept the

shipment until you make a notation of the damage on all copies of the carrier's delivery receipt

and have the driver sign all copies to acknowledge the notation. Do not sign a receipt for

damaged or missing cartons or there will be no basis for a claim. Ask the carrier to make a

detailed inspection of the damage. File a claim with the carrier. Cooperate and follow up as

necessary to secure final settlement

•Immediately advise Elite Screens of all damages or problems. Do not return merchandise to

Elite Screens, File your claim with the carrier and enclose copies of the bill of lading (signed by

the driver) and inspection report as support. Keep all packing materials and boxes with the

damaged product Do not throw anything away. Although Elite Screens will provide any assistance

possible we cannot be responsible for the actual filing of claims on the carrier or accept liability for

non-collectable freight claims.

For Warranty and Service requests please fill out a RMA / Service Form at:

www. elitescreens.com/help. html

Please visit this link for full Warranty information:

www. elitescreens.com/services.html

For Customer Service and Technical questions, please contact Elite Screens at:

Telephone: (562)-483-8198 Fax:(562)-483-8498

REMEMBER TO REGISTER YOUR WARRANTY AT

WWW.ELITESCREENS.COM/REGISTER.HTM

US & Canada Tech Support & Warranty Claim

Please contact us at service@elitescreens.com or call +1 877-511-1211 #3 Service

Europe Tech Support & Warranty Claim

Please contact us at service@elitescreens.eu or call +49-(0) 40-30392958

Asia Tech Support & Warranty Claim

Please contact us at service@elitescreens.com.cn or call +86-(0) 755-8461-7989

America:

Elite Screens Inc

16410 Manning Way

Cerritos, CA 90703 USA

Tel: 877-511-1211

Fax: 562-483-8498

[email protected]

www.elitescreens.com

Europe:

Elite Screens GmbH

Elite Screens Europe GmbH

Lübecker Straße 1

22087 Hamburg, Germany

Tel: +49-40-30392494

Fax: +49-40-49219200

[email protected]

www.elitescreens.eu

Latin America Contact:

East Asia Contact:

India Contact:

Japan Contact:

Asia:

Elite Screens China Ltd.

Longxi Duimianling Industry Zone

Longcheng Longgang District,

ShenZhen GuangDong, China

Tel: +86-(0)755-8461-7989

Fax: +86-(0)755-8461-7669

[email protected]

www.elitescreens.com.cn

Taiwan:

Elite Screens Taiwan Corp

[email protected]

www.elitscreens.com.tw

If you have pictures of your screen you'd like to share with us, please email your pictures to

[email protected]

For any technical inquiries, please email to [email protected]om or call (877) 511-1211.

(*Required Field)

(562)-483-8198 Ext. 313 / 234 / 202

www.elitescreens.com

Autres manuels pour QuickStand Series

Table des matières

Autres manuels Elite Screens Écran de projection

Elite Screens

Elite Screens Kestrel Tab-Tension 2 CLR Manuel utilisateur

Elite Screens

Elite Screens SilverFrame 100GH1 Manuel utilisateur

Elite Screens

Elite Screens TE100HW2 Manuel utilisateur

Elite Screens

Elite Screens Elite Tripod Series Manuel utilisateur

Elite Screens

Elite Screens YardMaster Manual Series Manuel utilisateur

Elite Screens

Elite Screens CineTension 3 Series Manuel utilisateur

Elite Screens

Elite Screens aeonclr series Manuel utilisateur

Elite Screens

Elite Screens Kestrel Series Manuel utilisateur

Elite Screens

Elite Screens Starling Tab-Tension Series Manuel utilisateur

Elite Screens

Elite Screens Spectrum 2 Series Guide de référence rapide

Elite Screens

Elite Screens ezFrame Plus Series Manuel utilisateur

Elite Screens

Elite Screens Aeon CineGrey 3D AT Series Manuel utilisateur

Elite Screens

Elite Screens Insta-DEM Series Manuel utilisateur

Elite Screens

Elite Screens EDGE FREE Aeon StarBright 9 Series Manuel utilisateur

Elite Screens

Elite Screens EVANESCE TAB-TENSION Series Guide de référence rapide

Elite Screens

Elite Screens IWB85SW2a Manuel utilisateur

Elite Screens

Elite Screens Osprey Tension Dual Series Manuel utilisateur

Elite Screens

Elite Screens CineTension B Series Mode d’emploi

Elite Screens

Elite Screens ezCinema Series Manuel utilisateur

Elite Screens

Elite Screens VMAX PLUS 4 SERIES Manuel utilisateur

Elite Screens

Elite Screens Elite Home 2 Series Manuel utilisateur

Elite Screens

Elite Screens Manual Series Manuel utilisateur

Elite Screens

Elite Screens Electric100H Manuel utilisateur

Elite Screens

Elite Screens VMAX180XWV Manuel utilisateur

Manuels Écran de projection populaires d'autres marques

FART PRODUKT

FART PRODUKT Standard SCREEN Manuel utilisateur

Draper

Draper E Series Manuel

Laarhoven

Laarhoven Companion II Manuel utilisateur

Renogy

Renogy RMS-LFPS-US Manuel utilisateur

Da-Lite

Da-Lite ExecutiveElectrol Manuel utilisateur

Samsung

Samsung S*H65* Manuel utilisateur

FONESTAR

FONESTAR PPTR-43100-FA Manuel utilisateur

Slide Clear

Slide Clear Varro XL Manuel utilisateur

OS РХ-090Н Manuel utilisateur

Niko

Niko 10-845 Manuel utilisateur

Speaka Professional

Speaka Professional 2357532 Manuel d'utilisation

Sima

Sima XL-72 Manuel utilisateur

Jasic

Jasic EVO 2.0 ET-200P Manuel utilisateur

InFocus

InFocus SC-WALL GRY-92H Manuel

Barco

Barco OverView MVL-615 Manuel utilisateur

Draper

Draper Envoy Manuel

SI Dynamic 2 XL Manuel utilisateur

Draper

Draper Nocturne+ E Instructions d'installation