Elite Screens Electric100H Manuel utilisateur

www.elitescreens.co

/ eliteinfo

elitescreens.com

Ez-Electric Screen

Spectrum/Vmax(Plus)

Series

Ver.

Users Guide

*Also available in Black casing

www.elitescreens.co

/ eliteinfo

elitescreens.com

ortant

safety

warning

recautions

1. Be sure to read this manual

eforeuse and follow the

rocedures s

ecified:

☆

Please retain this manual for future reference.

To avoid any damage, do not use any accessories not recommended by the manufacturer.

Handle the devicecarefully during transportation to avoid impact.

Do not put the device on uneven or inclined surfaces.

Do not put heavy objects on the power cord; affix the power cord properly to avoid

someone tripping over it.

Never overload the power cord to prevent electrical shock or fire.

Guard the device from any liquid or foreign object to avoid electrical shock or fire due to

loose contact or shor

circuit.

2. If any accessories need to

e replaced,

e careful to avoid shor

circuit.

3 There are no user serviceable parts in the device. Nobody except authorized technicians can

open this device. To prevent the risk of electrical shock or fire, protect against moisture and rain.

Make sure tha

the power source this device is connected to has a continuous power flow.

The rating label on the product indicates the rated voltage.

Do not handle the power plug when your hands are wet or your feet are in contact with water.

4. Do no

use this device under the following circumstances:

1) Disconnectthe power cord under the condition of heavy wind, rain, thunder or lightning.

2)Avoid direct sunshine, rain shower or moisture.

3) Keep away from fire sources and high temperature to prevent this device from overheating.

4)Cut off the power supply first before transportation or maintenance.

www.elitescreens.co

/ eliteinfo

elitescreens.com

arning

Individual modifications to this product are prohibited and will void the user’s warranty. Please

contact the Service Department for any questions.

This equipmen

has

een tested and found to comply with the limits for a Class B digital device,

ursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.

The

ower outle

ower to the unit should

e close to the unit and easil

accessi

Reorien

or relocate the receivin

antenna.



Increase the separation between the equipment and receiver.

Connect the equipment into an outlet using a circuit different from to where the receiver is connected

Consul

the dealer or an ex

erienced radio/TV technician for hel

www.elitescreens.co

/ eliteinfo

elitescreens.com

Accessor

for

ectrum and VMAX2

Bubble level

Eye receiver

(Optional for Spectrum)

Please always point to the eye

receiver when using the IR remote

Batter

Red 12V Green 0V

Wall

(Opt

ional

for

Spectrum)

12V trigger cable

ote: Contact your reseller for optional

accessories or visit shop.elitescreens.com

or accessory purchase.

(

for VMAX2 only)

www.elitescreens.co

/ eliteinfo

elitescreens.com

VMAX2

Spectrum

Series

PORTAN

ETY

INS

TRUC

TIONS

PRE

-I

NSTAL

TION

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles such as dust,

sawdust and liquids.

Keyhole for flush mounting to

wall(R5MM,R2MM) Top key holes for ceiling

mounting(R3 MM,R2 MM)

11m

3-5/8” Height of

end cap

Buil

-In IR Receiver for IR

remote (Point and Press Up /

Stop/Down)

3-1/8” Width of

end cap

4”

3-3

4”

1. Position the power cord so it will not be; near a hot surface, pulled at or tripped over.

2. To avoid suffering an electric shock, do not attempt to disassemble this appliance yourself. In the event of technical

trouble, please contact Elite Screens service dept. for help with repairing your screen.

3. Please disconnect the power supply when screen is not in use for a long period of time as should be done with any other

electric household appliance.

4. To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious damage or the

presence of broken parts.

www.elitescreens.co

/ eliteinfo

elitescreens.com

1. Select the location for

our screen within a reasonable an

le of

ection for

our home

ector and access to

ood

ower source.

2. For the best su

ort of

our screen, it is ideal to secure

our screen into the studs of

our house's

internal framework. If studs are not available, use hollow anchors for mountin

our wall-

screws in dr

wall or if

ou are installin

in a concrete structure, use the concrete bolts fo

securin

our screen into concrete walls.

(

Alwa

s Consult Installer or Hardware Store for

the correct screws

)

3. Make sure tha

the level in

erfec

horizontal ali

nmen

with one anothe

. Use wall/ceilin

wood screws to secure to the wood studs. Use hollow wall anchors if mountin

in dr

wall.

4. Position the washers to the head of the wall-screw. The washers

ive added stabilit

enablin

to remain firml

anchored to the wall.

5. The screen casin

is desi

ned to acce

t the wall screws directl

. If not usin

the O

tional L-

bracket, be sure to

osition the washer between the head of the wall-screw and the anchor slots

on the

ector casin

ardless of mountin

method, screen should

esecurel

orted so tha

ration or even

usive

ullin

on the viewin

surface will no

causecasetowor

loose or fall. Installer must

insure tha

fasteners used are of ade

uate stren

th and suita

le for the mountin

surface chosen.

www.elitescreens.co

/ eliteinfo

elitescreens.com

1. Using a tape measure, mark the keyholes that are located at the back of the screen's case end cap.

2. After marking the area and predrilled hole, insert the screw and leave about 1/8” of an inch from the wall to

mount the screen. (Fig. 1)

. 1

tional installation usin

a chain to han

the screen from the ceilin

. 2.

3. You can also hang the screen from

ceiling

yusing

chain with s-hooks (no

included) and hang

it by the keyholes located on each end of the case as shown on (Fig. 2).

www.elitescreens.co

/ eliteinfo

elitescreens.com

Wood/Dry Wall installation: Use “B” wood

screws provided for installation on wood studs

on wall. Or use “E” hollow wall anchors

rovided in conjunction with the wood screws

for drywall installation as shown on Fig. 1

. 1

Masonr

/Cementwall

. 2

Can

slide free

installation: Use “D” bolts

rovided for installing your

screen on a cement wall as

shown o n Fig. 2.

Two options for you

installation

*Once the L-brackets are in place, the screen can be hun

from the vertical hooks.

Please note these are only examples and additional hardware may be required for your particular

installation. Also, the screen can be hung directly on the wall screws or bolts without using the L-brackets

at all.

www.elitescreens.co

/ eliteinfo

elitescreens.com

12-V Tri

The VMAX2 and Spectrum Screens have the capability of using a 12-Volt Trigger. This accessory is

optional for Spectrum Screens and can be purchased separately.

Connection pins in

side of case

Wall-mounted Receive

(Extension Sensor)

To Projector

Red

DC12V

Green

Video Pro

ection Interface

12-VoltTriggerAssembly

Diag

am A

Wall Box with IR Remote Control

1. Bubble Level: Included with the installation package is a

small bubble level that can be useful in determining if the

screen is

erfectl

level when installin

Dia

ram B

Bubble Level

2. Below is the RF remote with a range of 30 Ft.

(Radio Frequency)

Note: When you get the optional RF, you should

follow the instruction and adjust the code.

Infrared “Eye” Sensor with

IR Remote Control

3. Below is the IR remote (Infra Red) with a

range of 15 Ft.

(Infra Red)

ote: The light on this remote does not turn on

when the buttons are depressed unlike the RF

remote.

Radio Frequency Remote Control Infrared Remote Control

www.elitescreens.co

/ eliteinfo

elitescreens.com

FAQ’S

: Wh

does m

screen no lon

er function?

A: There are a few

ossible thin

ou could check:

A.)Make sure your wall plug has power and that the screen is properly plugged in.

B.) Please check the fuse to y our screen. (Call Tech support for location of fuse)

C.) If screen works well with the line switch but not with the remote control, make sure the remote control has good

batteries in it.

D.) Our electric screens with a tubular motor installed are equipped with a Thermal relay. This would include all

Home (2, 3), Tension (1, 2, 3) series, and VMAX screens with a diagonal size above 180". This feature will

automatically shut off screen in the event the motor becomes too hot, preventing overheating of the motor. To

correct this, let screen alone for 10-15 minutes and try again.

2. Q: How is the screen material cleaned?

A: The screen material can be cleaned with mild soap and water.

3. Q: What type of batteries do the remote controls require?

A: The IR and RF remote controls use AAA alkaline batteries

4. Q: Can you manually pull down the screen?

A: No, manually pulling down the screen will damage the electronic motor rolling system.

5. Q: How could I setup my Screens IR receiver to work with my learning remote control system? Do you have any IR

codes I can use to achieve this?

A: Our IR remote controls have been evaluated and entered in to the databases of some Universal remote control

manufacturers. Please contact the manufacturer of your remote to inquire about your remotes ability to function with ours.

If they have not evaluated our remote control then the following list of Binary codes will be used for most remote setups.

For Spectrum, VMAX2 (Plus), Home2(3) and Tension2(3) Series

Up: 1111 0000 0001

Stop: 1111 0000 0010

Down: 1111 0000 0100

6. Q: What is the gain on the matte white screen material?

A: The matte white material has a gain of 1.1. For detailed specs, info please check our web-site for more detail

ote: For more U

date FAQ,

lease visit www.elitescreens.com

Autres manuels pour Electric100H

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Elite Screens Écran de projection

Elite Screens

Elite Screens Starling Tab-Tension 2 Series Manuel utilisateur

Elite Screens

Elite Screens 2 CLR Series Manuel utilisateur

Elite Screens

Elite Screens Spectrum Series Manuel utilisateur

Elite Screens

Elite Screens Yard Master Pro B Series Manuel utilisateur

Elite Screens

Elite Screens Saker Series Mode d’emploi

Elite Screens

Elite Screens EVANESCE TAB-TENSION Series Mode d’emploi

Elite Screens

Elite Screens M85XWS1-SRM Manuel utilisateur

Elite Screens

Elite Screens Lunette Series Manuel utilisateur

Elite Screens

Elite Screens AEON series Manuel utilisateur

Elite Screens

Elite Screens VMAX 2 Series Manuel utilisateur

Elite Screens

Elite Screens M92UWH Manuel utilisateur

Elite Screens

Elite Screens TE100HC2 Manuel du propriétaire

Elite Screens

Elite Screens CineTension2 Series Manuel utilisateur

Elite Screens

Elite Screens Elite Silvermax Series Manuel utilisateur

Elite Screens

Elite Screens Vmax Series Guide de référence rapide

Elite Screens

Elite Screens M100S Manuel utilisateur

Elite Screens

Elite Screens CineTension B Series Mode d’emploi

Elite Screens

Elite Screens aeonclr series Manuel utilisateur

Elite Screens

Elite Screens Starling Tab-Tension 2 Series Mode d’emploi

Elite Screens

Elite Screens Elite Home 2 Series Manuel utilisateur

Elite Screens

Elite Screens Spectrum Series Manuel utilisateur

Elite Screens

Elite Screens F100NWH Manuel utilisateur

Elite Screens

Elite Screens Kestrel Home Series Manuel utilisateur

Elite Screens

Elite Screens SilverFrame 100GH1 Manuel utilisateur

Manuels Écran de projection populaires d'autres marques

FART PRODUKT

FART PRODUKT Standard SCREEN Manuel utilisateur

Draper

Draper E Series Manuel

Laarhoven

Laarhoven Companion II Manuel utilisateur

Renogy

Renogy RMS-LFPS-US Manuel utilisateur

Da-Lite

Da-Lite ExecutiveElectrol Manuel utilisateur

Samsung

Samsung S*H65* Manuel utilisateur

FONESTAR

FONESTAR PPTR-43100-FA Manuel utilisateur

Slide Clear

Slide Clear Varro XL Manuel utilisateur

OS РХ-090Н Manuel utilisateur

Niko

Niko 10-845 Manuel utilisateur

Speaka Professional

Speaka Professional 2357532 Manuel d'utilisation

Sima

Sima XL-72 Manuel utilisateur

Jasic

Jasic EVO 2.0 ET-200P Manuel utilisateur

InFocus

InFocus SC-WALL GRY-92H Manuel

Barco

Barco OverView MVL-615 Manuel utilisateur

Draper

Draper Envoy Manuel

SI Dynamic 2 XL Manuel utilisateur

Draper

Draper Nocturne+ E Instructions d'installation