Element One FOLD! 173 FullHD Manuel utilisateur

Installation and Operating Instructions (EN)

FOLD! 173 FullHD

FOLD! 173 4K

Installation and Operating Instructions FOLD! (EN)

Explanation of symbols

Important Information

Caution

Ban

Installation and Operating Instructions FOLD! (EN)

Dear Customer,

thank you very much for purchasing our

product.

Please read this installation and operating

instructions carefully and keep them in a safe

place.

In this manual we have endeavored to

provide you with all the necessary information

to enable you to have most success with the

products.

Ralf Küchel

Technical Manager / CTO

Installation and Operating Instructions FOLD! (EN)

Table of Contents

Table of Contents......................................................................................................................................................... 2

Commissioning Date .................................................................................................................................................... 3

Notes........................................................................................................................................................................ 3

Description ................................................................................................................................................................... 5

Features ....................................................................................................................................................................... 5

Dimensions................................................................................................................................................................... 6

Safety Instructions ....................................................................................................................................................... 7

Installation ................................................................................................................................................................... 8

Commissioning........................................................................................................................................................... 10

General Information .............................................................................................................................................. 10

FOLD! 173 FullHD | FOLD! 173 4K.......................................................................................................................... 11

Operation ................................................................................................................................................................... 12

General Information .............................................................................................................................................. 12

Raising .................................................................................................................................................................... 12

Display Tilt.............................................................................................................................................................. 13

Retracting............................................................................................................................................................... 13

Service function DIRECT AXLE ACCESS (DAA)......................................................................................................... 14

Care Instructions ........................................................................................................................................................ 15

Display Setting with OSD Buttons .............................................................................................................................. 16

TCP/IP - Control and Status request .......................................................................................................................... 17

Control via a Media Control System with 9-pin d-sub Remote Interface.................................................................. 18

Firmware Update (Authorized Personnel only) ........................................................................................................ 18

Technical Specification............................................................................................................................................... 19

Safety Standards ........................................................................................................................................................ 20

Declaration of Conformity ......................................................................................................................................... 20

Warranty .................................................................................................................................................................... 21

Installation and Operating Instructions FOLD! (EN)

Commissioning Date

Date:

Serial No.:

Keep this document for future reference.

Pass on this document when you pass on the device.

Notes

Installation and Operating Instructions FOLD! (EN)

Scope of Supply

•FOLD! 173 FullHD | FOLD! 173 4K

•HDMI cable

•Table power supply - Input: 100-240V AC, 50 / 60Hz. 1.5A; Output: 12V 60W

•MAX 5.A (Cable length DC ~ 140cm)

•Power cable 1.5m

•Lock pins / transport lock

•Installation and Operating Instructions / Manual

Installation and Operating Instructions FOLD! (EN)

Description

The system FOLD! 173 consists of a TFT display with a frame for installation in a horizontal furniture

surface.

In the starting position (retracted), the system is flush with the furniture surface and covered.

The power supply of the display is interrupted.

By pressing the button, the FOLD! display moves to the operating position (extended).

Power will be supplied to the display.

Pressing the button again initiates the retraction.

The power supply of the display will be interrupted.

Both movements can be interrupted by a short push of a button.

The solid frame and high-quality mechanical elements ensure smooth, jerk- and vibration-free

operation.

FOLD! has an electromotive, programmable tilt adjustment. At the factory, the monitor moves

forward after extension, up to the maximum possible tilt angle. The angle can be adjusted and

preset as required by operating the control buttons (see Operation).

To prevent personal injury and damage, FOLD! has been equipped with a safety control. If

counterforces of 20 N or more occur during extension or retraction, an acoustic signal sounds and

the process is interrupted and a countermovement is initiated for approx. 1 sec.

Features

•8mm slim monitor housing made of powder coated aluminum

•2mm hardened and anti-reflective protective screen

•Compact housing dimensions

•LightWeight, LowNoise, LowEnergy design

•HDMI HDCP compatible

•FullHD or 4K/UHD resolution

•2x stepper motors 12V and precise mechanics

•Connector for remote control 9-pin d-sub and RJ45

•Electronic clamping protection plus mechanical protection in case of maloperation

•Manual extension function "DirectAxleAccess" for service, maintenance, installation

Installation and Operating Instructions FOLD! (EN)

Dimensions

Installation and Operating Instructions FOLD! (EN)

Safety Instructions

= Important Information

= Caution

= Ban

The device may only be opened in a disconnected state by authorized qualified personnel!

Let damage and defects be repaired immediately by authorized specialists.

Do not operate this device with any accessories other than the supplied ones.

Never open or close the monitor by force!

In the event of damage caused by third-party accessories, e.g. power supply unit, or

unauthorized attachments or modifications, any warranty and liability claims are excluded.

Remove the two locking pins of the transport lock and the display protectors before

commissioning. We recommend that you keep them.

To achieve the best image quality and to avoid image distortions, shadowing, image shifts,

synchronization errors, etc., use only high-quality cables: at least double-shielded and with

control cable according to VESA DDC 1/2 B standard.

Do not slide sharp or hard objects over the surface, it may be damaged.

Immediately remove any liquids spilled on the surface with a cloth.

Do not load the device with more than 1.0 kg when closed.

Do not cover the switched-on display for a longer period of time. Excessive temperatures

due to blocked heat emission can lead to defects or a reduced lifetime..

Installation and Operating Instructions FOLD! (EN)

Installation

= Important Information

= Caution

= Ban

Please make sure that your furniture has sufficient load-bearing capacity and strength

against deflection and warping even after it has been weakened by the cut-out!

Stresses on the mechanics due to tension, pressure, impact can lead to damage or

malfunctions.

ELEMENT ONE units should not be transported in the installed condition!

If transport in the installed state is necessary, the following conditions must be considered:

•Retract / close display

•Transport and store devices vertically, i.e. according to the installation position

•Do not tilt furniture with installed devices

•Secure devices against slipping and falling out

•Observe the permissible load of the displays, do not stack them.

•Never transport or store FOLD! while lying on its side.

•Attach the display protectors

ELEMENT ONE devices are fixed in the furniture by means of the decorative/holding frame.

The integrated grub screws are intended for horizontal alignment in the furniture.

Please note that these may only be applied lightly (risk of damage to the furniture or

distortion of the device mechanics and thus possible malfunction of the movement

mechanics)

For customer-side mounting, ELEMENT ONE will provide an installation drawing upon

request.

The table cut-out must be milled or sawn out before mounting the unit and according to the

installation drawings (see Dimensions)

It is recommended to install the device with two persons.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Element One écran tactile

Element One

Element One CONVIS 101/30 WXGA Manuel utilisateur

Manuels écran tactile populaires d'autres marques

Elecro Engineering

Elecro Engineering Poolsmart Plus Instructions d'installation

Johnson Controls

Johnson Controls IQ4 HUB Manuel utilisateur

Elo TouchSystems

Elo TouchSystems ET2270L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems ET1002L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 3201L Manuel utilisateur

Duratec

Duratec S15 Manuel utilisateur

Crestron

Crestron TPMC-3SM Manuel utilisateur

Racelogic

Racelogic MFD Touch Manuel utilisateur

J2 580 Guide de l'utilisateur

HAI

HAI OmniTouch 10p Manuel utilisateur

panel

panel PC PSR108-FM Series Manuel utilisateur

Tipro

Tipro FREE+ Manuel utilisateur

Systemline

Systemline Commander Manuel utilisateur

Interactive Technologies

Interactive Technologies Insite Manuel utilisateur

GVision

GVision Legacy Manuel utilisateur

BeiJer

BeiJer T21C-C24 Manuel utilisateur

Advantech

Advantech ITM-5117 Series Manuel utilisateur

Edge

Edge CS Manuel utilisateur