Ekwb EK-Quantum Vector XC3 RTX 3080 D-RGB Manuel utilisateur

USER GUIDE

GPU WATER BLOCK

EK-Quantum

Vector XC3 RTX 3080/3090 D-RGB

Before you start using this product, please follow these basic guidelines:

Carefully read the manual before beginning with the

installation process.

Remove your graphics card from the computer for the safest

mounting process to prevent any possible damage to your

GPU or its circuit board (PCB).

EK Fittings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured with the

rubber O-ring gaskets.

The use of quality market-proven corrosion-inhibiting

coolants is always strongly recommended for any liquid

cooling system.

Do not use pure distilled water as a cooling liquid! For best

results, EK recommends the use of EK-CryoFuel Coolants.

Make sure to bleed air out of your water block thoroughly in

order to reach optimal performance.

- 3 -

TABLE OF CONTENTS

BOX CONTENTS 4

REQUIRED TOOLS 5

WATER BLOCK DIMENSIONS 5

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS 6

PREPARING THE GRAPHICS CARD 7

REMOVING THE STOCK COOLER 7

CLEANING THE PCB 8

CUTTING AND PLACING THERMAL PADS 9

APPLYING THERMAL COMPOUND 10

INSTALLING THE WATER BLOCK 11

PLACING THE BLOCK ON THE GRAPHICS CARD 11

ATTACHING THE BLOCK TO THE GRAPHICS CARD 12

ATTACHING THE I/O BRACKET 12

INSERTING THE GRAPHICS CARD INTO THE CHASSIS 13

INSTALLATION OF FITTINGS AND TUBING 13

CONNECTING THE D-RGB LED STRIP 14

TESTING THE LOOP 14

CHECKING FOR CONTACT IN CASE OF HIGH TEMPERATURES 15

SUPPORT AND SERVICE 16

SOCIAL MEDIA 16

- 4 -

BOX CONTENTS

4 mm

6 mm

8 mm

M3x4 DIN7985 Screw (2 pcs) EK-Loop Multi Allen Key (1 pc)

M2.5 Nut (2 pcs)

M2.5x6 AX1 Screw (13 pcs)

Allen Key 2.5 mm (1 pc)

Thermal Pad F 1.0 mm (4 pcs)

Thermal Grease (1 pc)

M2.5x8 AX1 Screw (2 pcs)

M2.5x4 AX1 Screw (16 pcs)

EK-Quantum Vector XC3 RTX 3080/3090 D-RGB PVC Washer M2.5 (16 pcs)

120 mm

16 mm

EK-Plug G1/4 (2 pcs)

Universal Mounting Mechanism – You may not need every

screw from this package.

- 5 -

WATER BLOCK DIMENSIONS

99 mm

95 mm

275 mm

124 mm

113 mm

124 mm

20.5 mm

Phillips Head Screwdriver Scissors

REQUIRED TOOLS

- 6 -

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS

Technical Speciﬁcation:

- Dimensions: (LxHxW) - 275 x 124 x 20.5 mm

- D-RGB (Addressable RGB) cable length: 500 mm

- D-RGB LED count: Plexi (5), Acetal (11)

- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

M4 x 8 DIN7984 SCREW

M3.5/M2.5 x 12.6

STANDOFF

M4 x 27 DIN7984

SCREW

TERMINAL

(PLEXI / ACETAL)

O-RING 15x1

INSERT

COLDPLATE

(COPPER / NICKEL)

JE T P L ATE

M3.5/M2.5 x 2.5 STANDOFF

M2.5x8 AX1

SCREW

LED D-RGB

STRIP

UNDER STANDOUT

(BLACK)

EK BADGE

STANDOUT (BLACK / WHITE)

O-RING 122X2

TOP PLATE (PLEXI / ACETAL)

- 7 -

PREPARING THE GRAPHICS CARD

STEP 1

REMOVING THE STOCK COOLER

OPTION 1 – GPU Versions Without a Backplate

Some versions of this GPU don’t have a backplate (e.g., EVGA GeForce

RTX 3080 XC3 BLACK GAMING).

Use the Phillips head screwdriver to remove the eleven marked screws

and the Stock Cooler Backplate from the backside of the GPU. You do

not have to remove the unmarked I/O Bracket screw.

Carefully detach the PCB from the stock cooler and disconnect all

cables connecting the stock cooler to the PCB.

Always remove the stock cooler slowly - it might be ﬁrmly

glued to the PCB with thermal pads.

You will need the following tool:

Phillips Head Screwdriver

STEP 1

STOCK COOLER BACKPLATE

OPTION 1

I/O BRACKET SCREW

- 8 -

STEP 2

CLEANING THE PCB

Wipe off the remains of the original thermal compound using a

nonabrasive cloth or Q-tip, as shown in the sample image, until the

components and circuit board are completely clean. EK recommends

the use of denatured alcohol for removing TIM leftovers. After that,

remove all remaining stock thermal pads from the PCB.

OPTION 2 – GPU Versions With a Backplate

Use the Phillips head screwdriver to remove the twelve marked screws

and the Stock Cooler Backplate from the backplate’s side.

Carefully detach the PCB from the stock cooler and the backplate, and

disconnect all cables connecting the stock cooler to the PCB.

Always remove the stock cooler slowly - it might be ﬁrmly

glued to the PCB with thermal pads.

STEP 1

OPTION 2

STOCK COOLER BACKPLATE

BAC KP L ATE

- 9 -

STEP 2

Once cut to size, thermal pads should be placed on the PCB, as

illustrated below. EK made sure to provide you with more than an

adequate quantity of thermal pads to complete this Step.

STEP 1

Your GPU water block comes with thermal pads that have to be cut

into smaller pieces to cover all the VRM components, such as COILs,

MOSFETs, and drivers.

You must remove the protective foil from both sides of the

thermal pad before installation.

Thermal pads:

4x Thermal Pad F 1.0 mm – (120 x 16 mm) EAN: 3830046996732

STEP 1

Thermal Pad F – 1.0 mm (120 x 16 mm)

CUTTING AND PLACING THERMAL PADS

120 mm

16 mm

1 mm

Thermal Pad F 1.0mm

- 10 -

Thermal Grease

STEP 1

Apply the enclosed EK-TIM Ectotherm thermal grease (thermal

compound) on the CPU heat spreader – IHS – as shown in the

image. The layer of the thermal compound must be thin and even

over the entire surface of the IHS.

The excessive or uneven application of thermal grease

may lead to poor performance!

STEP 1

APPLYING THERMAL COMPOUND

For this Step, you will need: Thermal Grease - EAN: 3830046998446

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ekwb Matériel informatique

ekwb

ekwb EK-FC R9-295X2 Manuel

ekwb

ekwb EK-FC690 GTX Backplate Manuel

ekwb

ekwb EK-FC R9-285 Manuel

ekwb

ekwb EK-FC980 GTX Ti WF3 Manuel

ekwb

ekwb EK-Quantum Vector FTW3 RTX 3070 Manuel utilisateur

ekwb

ekwb EK-Quantum Vector RTX 3080/3090 D-RGB Manuel utilisateur

ekwb

ekwb EK-FB ASUS Z270E Strix Monoblock Series Manuel utilisateur

ekwb

ekwb EK Series Manuel utilisateur

ekwb

ekwb EK-BAY DCP 2.2 Manuel

ekwb

ekwb EK-Quantum Vector2 Trio RTX 3080/90 ABP Set... Manuel utilisateur

ekwb

ekwb EK-FC Titan X Mode d’emploi

ekwb

ekwb EK-FC460 GS/SONIC Manuel

ekwb

ekwb EK-FC580 GTX Mode d’emploi

ekwb

ekwb EK-Quantum Vector TUF RX 6800 Manuel utilisateur

ekwb

ekwb EK-Quantum Reflection PC-O11D XL D5 PWM... Manuel utilisateur

ekwb

ekwb Barebones Mode d’emploi

ekwb

ekwb EK-FC980 GTX Ti Classy KPE Manuel

ekwb

ekwb EK-FB KIT GA X79 (UD7) Mode d’emploi

ekwb

ekwb EK-FC1080 GTX Ti Aorus RGB Manuel utilisateur

ekwb

ekwb EK-FB ASUS R4BE Monoblock Manuel utilisateur

ekwb

ekwb EK-FB ASUS R5-E10 Mode d’emploi

ekwb

ekwb EK-FC980 GTX Classy Manuel

ekwb

ekwb D-RGB Manuel utilisateur

ekwb

ekwb EK-FB ASUS X58 Mode d’emploi

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

ekwb EK-Quantum Vector XC3 RTX 3080 D-RGB Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques