Edelbrock 67452 Manuel utilisateur

Catalog #67452, #67453

Brochure #63-67452

Rev. 5/06 - DA/mc

SHORTY HEADER

For 1994-1995 Ford Mustang, Capri, Mark,

5.0L (302 V8) with E.F.I., Auto/Std. Transmission

Catalog #67452, #67453

INSTALLATION INSTRUCTION

Please study these instructions carefully before installing your new

Shorty Header

. If you have any questions, please

contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail

us at [email protected]. Please fill out and mail your warranty card.

SHORTY HEADER: These components are designed as a system to improve the exhaust efficiency of the Ford 5.0 liter

V8 engine with E.F.I. (Electronic Fuel Injection). These tubular manifolds are a direct replacement for the factory exhaust

manifolds. A performance gain can be expected by the installation of the system. This system requires no welding

for installation and retains all O.E.M. emissions equipment.

Suggested Tools Needed for Installation: This vehicle has some metric fasteners.

❑ 3/8” ratchet socket set with extensions and sockets

❑Combination set of open-end wrenches

❑ Jackstands, screwdrivers, pliers, crescent wrench, etc.

❑ Liquid penetrant, anti-seize compound

SPECIAL NOTICE: This Edelbrock Shorty Header has received an Executive Order number (E.O.#) from the California Air

Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment

certification, we have included a silver fan shroud decal to help testing personnel verify the this part is a legal replacement

on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed next to the existing emission and

engine specifications decal. Do not cover any part of your original emission decal.

WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your Edelbrock

Shorty Header. Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the

system.

CAUTION: Due to higher underhood temperatures generated by shorty header, vehicles equipped with original spark plug

wires should have them replaced with high temperature plug wires for longer life.

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

Catalog #67452, #67453

Brochure #63-67452

Rev. 5/06 - DA/mc

Disassembly

1. Disconnect negative cable from battery.

2. Use penetrating oil on all nuts and bolts to be

removed. This will prevent the possibility of broken or

stripped nuts and bolts.

3. Unbolt exhaust pipes from both exhaust manifolds.

4. Remove EGR tube from right side.

5. Unbolt and remove both exhaust manifolds.

6. Clean and inspect all sealing surfaces before

assembly.

Assembly - Left Side

1. With manifold port gasket in place, start a header bolt

with lock and flat washer in the rearmost bolt hole

leaving enough room for the manifold to slip into

position.

2. Start balance of header bolts with lock washers and

tighten evenly.

INSTALLATION INSTRUCTIONS

Edelbrock Corporation

2700 California St.

Torrance, CA 90503

Tech Line: 1-800-416-8628

E-Mail: [email protected]

KIT CONTENTS

Catalog #67452 (Ceramic-Coated), #67453 (Ti-Tech Coated)

Qty.Description Qty.Description

❑1 Manifold left side #25-9269 (#67452) ❑2 Coupler band clamps

❑1 Manifold right side #25-9270 (#67452) ❑2 Manifold port gaskets

❑ 1 Manifold left side #25-9036 (#67453)

❑2 Connector gaskets

❑ 1 Manifold right side #25-9141 (#67453)

❑ 12 Lock nuts, cad-plated; 3/8”-16

❑1 Manifold left side (B section) #25-9103 ❑ 14 Socket head cap screws; 3/8”-16 x 1/4”

❑1 Manifold right side (B section) #25-9104 ❑4 Tie wraps; 11”

❑1 Cat. adapter left (3”) #25-9622 ❑ 20 Split lock washers; 5/16”

❑1 Cat. adapter right (3”) #25-9623 ❑6 Hardened washers; 5/16” i.d. x 3/4” o.d.

❑ 20 Header bolts; 5/16”-18 x 1”

Assembly - Right Side

1. With gasket in place, start all bolts except the rear bolt

with lock and flat washers on each.

2. Start rear bolt with A.I.R. tube support bracket in

place.

3. Tighten balance of header bolts evenly.

4. Re-attach exhaust pipes to TES manifolds using your

original nuts.

5. Reinstall EGR tube.

6. Connect all parts including battery.

7. Start engine and bring up to normal running

temperature, then turn off and let cool.

8. When cool, re-tighten all manifold nuts and bolts.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Edelbrock Pièce automobile

Edelbrock

Edelbrock Chevrolet 5783 Manuel utilisateur

Edelbrock

Edelbrock 5588 Manuel utilisateur

Edelbrock

Edelbrock 7122 Manuel utilisateur

Edelbrock

Edelbrock 72552 Manuel utilisateur

Edelbrock

Edelbrock SBC Vortec 283-400 c.i.d. Chevy V8 Manuel utilisateur

Edelbrock

Edelbrock 2828 Manuel utilisateur

Edelbrock

Edelbrock 5213 Manuel utilisateur

Edelbrock

Edelbrock 1403-1413 Manuel utilisateur

Edelbrock

Edelbrock 66722 Manuel utilisateur

Edelbrock

Edelbrock Chevrolet 1500-6500 Manuel utilisateur

Edelbrock

Edelbrock 5220 Manuel utilisateur

Edelbrock

Edelbrock 1711 Manuel utilisateur

Edelbrock

Edelbrock Torker II 5081 Manuel utilisateur

Edelbrock

Edelbrock Russell R09430 Manuel utilisateur

Edelbrock

Edelbrock Chevrolet/GMC Trucks 454 SS Manuel utilisateur

Edelbrock

Edelbrock 5274 5274 Manuel utilisateur

Edelbrock

Edelbrock 1803 Manuel utilisateur

Edelbrock

Edelbrock 5266 Manuel utilisateur

Edelbrock

Edelbrock 2281 Manuel utilisateur

Edelbrock

Edelbrock 2161 Manuel utilisateur

Edelbrock

Edelbrock PRO-FLO XT 3527 Manuel utilisateur

Edelbrock

Edelbrock Victor 77459 Manuel utilisateur

Edelbrock

Edelbrock 68832 (Ceramic-Coated) Manuel utilisateur

Edelbrock

Edelbrock 15004 Manuel utilisateur

Manuels Pièce automobile populaires d'autres marques

Dakota Digital

Dakota Digital 650277 Manuel utilisateur

bosal

bosal 037031 Manuel utilisateur

Vintage Air

Vintage Air 571063 Manuel utilisateur

GFB

GFB EX38 Manuel utilisateur

bosal

bosal 028091 Manuel utilisateur

Dodge

Dodge 8W-43 Guide de démarrage rapide

ICI

ICI Magnum FBM10DGN Manuel utilisateur

Volant Perfomance

Volant Perfomance 19435 Manuel utilisateur

BENDIX

BENDIX GEN 4 GEN 5 ABS Manuel utilisateur

Vintage Air

Vintage Air 571065 Manuel utilisateur

Rugged Ridge

Rugged Ridge 11503.13 Manuel utilisateur

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manuel utilisateur

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Mode d’emploi

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manuel utilisateur

Toshiba

Toshiba 48-1250 A Manuel utilisateur

aldes

aldes EHT2 Manuel utilisateur

Go Rhino

Go Rhino 24371T Manuel utilisateur

BBK

BBK 18950 Manuel utilisateur