Eaton Eaton 5PX Manuel utilisateur

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 1/14

UPS model : 5PX

Date : 05/02/2016

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 2/14

Contents

1. Download the software setUPS and the firmware

(if receiving this document by email)

2. UPS connection

3. Launch setUPS

4. Power OFF the UPS

5. setUPS firmware menu

6. Firmware selection

7. Confirmation

8. Upgrade process

9. Upload success

10. Return to normal state

11. UPS ON

12. Trouble shooting

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 3/14

1. Download the software setUPS and the firmware

Go to the Power Quality Website (http://eaton.com/Downloads/)

Select your product , 5PX, and select your solution type, firmware.

Click on “Download 5PX UPS Firmware Updates”

And click on the required link.

Firmware

file

setUPS

software

Upgrade

instructions

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 4/14

2. UPS connection

Connect a communication cable to the UPS unit, on USB or RS232 (RJ45) port on the

back of the UPS. Then connect the cable to your computer.

3. Launch setUPS

For a first time Eaton®setUPS installation, double click on the exe file

and valid the “User Account Control” message by “Yes”

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 5/14

The installer opens, click on “Next”Read and click on “Accept”

Click on “Install”And on “Finish”

And the Eaton®setUPS starts.

If Eaton®setUPS is already installed, open setUPS

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 6/14

At the startup, the software searches for the connected UPS

and as soon as communication is established, the product is identified :

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 7/14

4. Power OFF the UPS

To turn the power off on the 5PX UPS, press and hold the power button for 3

seconds.

WARNING : this will turn OFF any load that is connected to the UPS outlets !

Once the unit is OFF, the screen looks like the picture below :

5. setUPS firmware menu

On the left menu, select “Firmware” section, the available firmware appears :

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 8/14

If the firmware list is empty, copy/paste the downloaded firmware in the target folder My

Documents\Eaton setUPS\firmware (click on the “…” button) :

6. Firmware selection

Click on the firmware file to select it and then on the “Upload firmware” button :

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 9/14

7. Confirmation

The following screen appears which reminds you that UPS output is OFF during the

upgrade, select “Yes” to continue

8. Upgrade process

A click noise comes from the UPS (relay) and it transfers into Boot loader mode. The

firmware will then be erased and then rewritten into the UPS.

During the flash process, the display on the UPS goes blank and the AC line, the battery

and the Alarm lights cycle. This is normal.

Eaton®setUPS

Firmware upgrade procedure

Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 10/14

And on setUPS window, the firmware upgrade steps appear :

9. Upload success

When the firmware flash process is done, the UPS fans start and the UPS emits a

long beep. The display on the UPS returns back to the normal OFF state.

The setUPS issues a pop up to let know the firmware flash has been successful : Click

on “OK” :

Autres manuels pour Eaton 5PX

Table des matières

Autres manuels Eaton UPS

Eaton

Eaton MBP11K208 Manuel utilisateur

Eaton

Eaton 93PR Series Manuel utilisateur

Eaton

Eaton Powerware BladeUPS Manuel utilisateur

Eaton

Eaton Powerware 9390 IAC-D Manuel utilisateur

Eaton

Eaton RT 1250VA Manuel utilisateur

Eaton

Eaton Power Xpert 9395P-1200 Manuel utilisateur

Eaton

Eaton 1000i Manuel utilisateur

Eaton

Eaton 93PS Guide de configuration

Eaton

Eaton 5S 700 Manuel utilisateur

Eaton

Eaton Powerware Series Manuel utilisateur

Eaton

Eaton 10000HXL31 Manuel utilisateur

Eaton

Eaton Powerware 9140 Manuel utilisateur

Eaton

Eaton Power Xpert 9395 550 Manuel utilisateur

Eaton

Eaton 9315 Manuel utilisateur

Eaton

Eaton 9E-IN 1K Manuel utilisateur

Eaton

Eaton DX 1000 LAN Manuel utilisateur

Eaton

Eaton 3S850D Manuel utilisateur

Eaton

Eaton 9315 Manuel utilisateur

Eaton

Eaton Powerware 5125 Manuel utilisateur

Eaton

Eaton Powerware 5125 Manuel utilisateur

Eaton

Eaton 9E Manuel utilisateur

Eaton

Eaton 3S700D Manuel utilisateur

Eaton

Eaton 9SX 15K Series Manuel utilisateur

Eaton

Eaton Power Xpert 9395 High Performance Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur

ZincFive

ZincFive BC Series Manuel utilisateur