Eaton ESWV10401 Manuel

Effective May 2011

ESWV10401

ESWV10801

Instructional Leaet

IL00412021E

1x4 and 1x8 passive coaxial

distribution module

Product description

The Eaton ESWV10401 and ESWV10801 coaxial

distribution module provides distribution of one

incoming coaxial signal (TV, CATV, modulated

signals) to four or eight locations with four pass-

through connections for SATV. Please be sure

to review this installation guide carefully prior

to installation.

Features

Video distribution

• Distributes one incoming video signal

to four or eight locations

• Four pass-through connections for satellite

TV distribution

• Bi-directional for digital and networking signals

Caution

installation preCautions: never install or

work with video wiring during a lightning

storm. never install telephone jaCks in

wet loCation unless the jaCk is speCifiCally

designed for use in wet loCations. have the

eleCtriCian ConneCt the aC outlet to branCh

CirCuit power. the ConneCtion should be

in aCCordanCe with the national eleCtriCal

Code,TartiCles 110, 250, and 300. never touCh

uninsulated telephone wires or terminals

unless the telephone line has been

disConneCted at the network interfaCe

or demarCation point.

Eaton Corporation

Electrical Sector

1111 Superior Ave.

Cleveland, OH 44114

United States

877-ETN-CARE (877-386-2273)

Eaton.com

Printed in USA

Publication No. IL00412021E / Z10942

May 2011

Eaton is a registered trademark

of Eaton Corporation.

All other trademarks are property

of their respective owners.

Instructional Leaet IL00412021E

Effective May 2011

1x4 and 1x8 passive coaxial

distribution module

Connecting incoming television or cable TV

to the coaxial distribution module

1. Run an RG6 coaxial cable from the video source (antenna or

cable TV D-marc) location to the ESWV10401 or ESWV10801.

2. Connect the RG6 cable to the RF input located on the

rear of the coaxial distribution module (see Figure 1).

3. Connect the RG6 coaxial cable running to the various

room locations to the coaxial connectors on the front

of the module marked Outputs (see Figure 2).

Connecting to satellite signals

1. Run two, three, or four RG6 cables from the satellite dish

to the ESWV10401 or ESWV10801 modules and connect the

cables to the SATV connectors on the rear (see Figure 1).

2. Connect the RG6 cables running to the various satellite

receiver (room) locations to the inputs on the front of the

ESWV10401 or ESWV10801 module (see Figure 2).

Figure 1.

Figure 2.

Input SATV connections

Four pass-through

connections

for SATV

Outputs to

room locations

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Eaton Unité de contrôle

Eaton

Eaton PM3 Manuel

Eaton

Eaton 33 Manuel utilisateur

Eaton

Eaton SL7-AP Series Manuel

Eaton

Eaton Vickers FCGT-02-A-11 Series Manuel utilisateur

Eaton

Eaton Crouse-hinds series Guide de configuration

Eaton

Eaton xComfort CAEE-02/01 Manuel utilisateur

Eaton

Eaton Power XL SmartWire-DT DX-NET-SWD1 Manuel

Eaton

Eaton Crouse-hinds series Manuel utilisateur

Eaton

Eaton COOPER POWER SERIES Manuel du propriétaire

Eaton

Eaton Power XL SmartWire-DT DX-NET-SWD Series Manuel utilisateur

Eaton

Eaton Cutler-Hammer Digitrip RMS 610 Manuel

Eaton

Eaton Vickers CM2 Series Manuel utilisateur

Eaton

Eaton XNE-2CNT-2PWM Manuel utilisateur

Eaton

Eaton Ampgard AR Manuel utilisateur

Eaton

Eaton Crouse-hinds series Manuel utilisateur

Eaton

Eaton Powerware 9395 Manuel utilisateur

Eaton

Eaton ELC-EX08NNSN Manuel utilisateur

Eaton

Eaton Crouse-hinds series Manuel utilisateur

Eaton

Eaton NH00 Manuel utilisateur

Eaton

Eaton i-on30R Manuel utilisateur

Eaton

Eaton Vickers DF3S4-16 Series Manuel utilisateur

Eaton

Eaton xComfort F94 Series Manuel utilisateur

Eaton

Eaton eNMC2 Manuel utilisateur

Eaton

Eaton DXE-EXT-SET Manuel

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

Flyron

Flyron FN-BC04 Manuel utilisateur