Eastwood 31483 Manuel utilisateur

MICROMETER

TORQUE WRENCH

INSTRUCTIONS

Part #s 31483, 31484, 31485

2Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com

The MICROMETER TORQUE WRENCHES rely on a proven straightforward design to provide many

years of service. It features rugged all metal construction for maximum durability. Easy to use

with a range that is ideal for most average automotive applications.

CONTENTS

(1) Torque Wrench

(1) Heavy Duty Blow Molded Storage Case

SPECIFICATIONS

Torque Range Torque Increments Accuracy Drive

#31483

1/2” Micrometer

Torque Wrench

10-150 ft-lb

1.4-20.7 m-kgs 1 ft-lb 6% 1/2”

#31484

3/8” Micrometer

Torque Wrench

5-80 ft-lb

0.7-11.2 m-kgs 0.5 ft-lb 6% 3/8”

#31485

1/4” Micrometer

Torque Wrench

20-200 in-lb

23-230 cm-kgs 1 in-lb 6% 1/4”

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

SAFETY INFORMATION

The following explanations are displayed in this manual, on the labeling,

and on all other information provided with this product:

To order parts and supplies: 800.345.1178 >> eastwood.com 3

READ INSTRUCTIONS

Thoroughly read and understand these product instructions before using

this Torque Wrench.

• Keep these product instructions for future reference.

INJURY HAZARDS!

• This tool creates high amounts of leverage while in operation.

Wear ANSI approved eye protection and heavy duty work gloves at

all times while operating.

• Over-torqueing can cause part and or fastener failure.

• Read and understand all vehicle manufacturer’s torquing instructions for

the vehicle or object on which the fastener is being torqued. Failure to do so

could cause damage or personal injury.

INJURY HAZARDS!

• Do not use for loosening and installing fasteners. Use only for tightening a

fastener to the recommended torque.

• Do not extend handle by use of a pipe or other means. Doing so may cause

damage or personal injury.

• Inspect before every use, if tool appears damaged do not use.

• All sockets, extensions or accessory tools used in conjunction with this

torque wrench must be rated to handle the intended torque setting.

SAFETY INFORMATION

4Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com

SETTING THE TORQUE VALUE

• Unlock by turning the black

Knurled Knob at the end of the

Torque Wrench Handle approx.

1/4 turn (FIG. 1) in a Counter-

Clockwise direction.

• To select the desired torque, turn

the Rotating Handle Sleeve until

the “0” aligns with a major gradu-

ation on the stationary segment of

the Handle (FIG 2), then continue

turning the Handle Sleeve until the

desired minor graduation on it is

aligned with the stationary handle

segment center line (FIG 3).

• Lock the torque setting by turning

the black Knurled Knob at the end

of the Torque Wrench Handle

(FIG. 1) in a Clockwise direction

until it stops.

• The Torque Wrench is now ready

for use.

FIG. 1

FIG. 2

FIG. 3

Do not excessively loosen the

black Knurled Knob or the

Torque Wrench factory

calibration will be destroyed.

Do not rotate the Rotating

Handle Sleeve beyond or

below the maximum range

or the Torque Wrench factory

calibration will be destroyed.

Shown set for 42 ft-lbs

Shown set for 40 ft-lbs

Rotating Handle Sleeve

✓

Lock Knob

Rotate

✓

Rotate

To order parts and supplies: 800.345.1178 >> eastwood.com 5

OPERATION

• Set torque wrench to the desired torque value (see previous section: Setting the Torque Value).

• Install appropriate socket to the square drive and place the socket securely over the fastener

• Center hand on the handle grip and apply a steady force in the tightening direction until a

noticeable “click” is felt and heard. Immediately stop pulling once the “click” is achieved.

The fastener is now torqued to the desired setting.

• After each use, unlock the black knurled knob and rotate handle counterclockwise until the

torque wrench is at its lowest setting then re-lock the rotating handle in this position.

This will release any internal tension and allow the torque wrench to maintain calibration

as long as possible.

• Always bring fasteners to near ﬁnal tightness with conventional tools before tightening with

Torque Wrench to ﬁnal torque. Never use the Torque Wrench as a general ratchet to tighten

or loosen fasteners or permanent damage can occur.

6Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com

SETTING THE TORQUE WRENCH

WITH TORQUE ADAPTERS

If a Torque Adapter is being used, the effective lever length will change with the addition of the

adapter. Use the equations below to calculate the torque setting adjustments necessary.

NOTE: Socket Drive Extensions must be placed axially in line with the drive mechanism and

handle of the torque wrench as shown in FIG 4.

E= Adapter length

L= Torque wrench length

TW = Torque set on wrench

TE = Actual torque applied with extension in place

TW = (TE x L) / (L+E)

TE = (TW x (L+E))/ L

✓

FIG. 4

To order parts and supplies: 800.345.1178 >> eastwood.com 7

MAINTENANCE

• Before each use, inspect the condition of the tool for damage or corrosion that may

affect operation.

• After each use, be sure to adjust the Torque Wrench to its lowest torque setting. This releases

internal tension and allows the torque wrench to maintain calibration as long as possible.

• Keep the Torque Wrench stored in a clean, dry location, in the supplied case.

Periodically coat with a rust preventative coating such as a light machine oil.

Dropping the Torque Wrench can have an adverse effect on accuracy.

Do Not drop the Torque Wrench or allow it to fall.

If you have any questions about the use of this product, please contact

The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com

PDF version of this manual is available online >> eastwood.com/31482manual

The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA

US and Canada: 800.345.1178 Outside US: 610.718.8335

Fax: 610.323.6268 eastwood.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Eastwood Outils électriques

Eastwood

Eastwood 21749 Manuel utilisateur

Eastwood

Eastwood 11797 Manuel utilisateur

Eastwood

Eastwood 21640 Manuel utilisateur

Eastwood

Eastwood 31338 Manuel utilisateur

Eastwood

Eastwood 20646 Manuel utilisateur

Eastwood

Eastwood 14041 Manuel utilisateur

Eastwood

Eastwood 54441 Manuel utilisateur

Eastwood

Eastwood 11737 Manuel utilisateur

Eastwood

Eastwood 31753 Manuel utilisateur

Eastwood

Eastwood 2-PS Manuel utilisateur

Eastwood

Eastwood 20198 Manuel utilisateur

Eastwood

Eastwood 20198 Manuel utilisateur

Eastwood

Eastwood B60 Manuel utilisateur

Eastwood

Eastwood 31752 Manuel utilisateur

Eastwood

Eastwood 13622 Manuel utilisateur

Eastwood

Eastwood 54440 Manuel utilisateur

Eastwood

Eastwood 11797 Manuel utilisateur

Eastwood

Eastwood 13650 Manuel utilisateur

Eastwood

Eastwood 21560 Manuel utilisateur

Eastwood

Eastwood 13475 Manuel utilisateur

Eastwood

Eastwood 54442 Manuel utilisateur

Eastwood

Eastwood 13743 Manuel utilisateur

Eastwood

Eastwood 33862 Manuel utilisateur

Eastwood

Eastwood 21304 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel