Eastwood 11797 Manuel utilisateur

4" THROATLESS

SHEARS

INSTRUCTIONS

Item #11797

The Eastwood 4” Throatless Shear for metal cutting is precision designed

and manufactured to allow precise control when making straight or intricately

curved cuts of any length, in any direction.

Hardened, fi nely honed blades produce clean, burr-free cuts in aluminum,

steel and other mild metals. The gear-driven, design delivers maximum

shearing power with minimal handle force.

position with the Locking Pin inserted through both

the Upper Blade Housing and the Body in the

CLOSED position (FIG A). The weight of the handle left

in the up position can cause the upper blade to suddenly

INCLUDE

(1)

4” Metal Shear Body (1) Safety Chain & Pin

(1)

17” Handle

SPECIFICATIO

Maximum material cutting thickness: 14 Gauge•

READ

INSTRUCTIONS!

• Read this entire manual before set up and use.

• Keep this manual in a safe location as it will be necessary to refer to it often.

INJURY

HAZARDS!

• WARNING

This tool has

EXTREMELY

SHARP cutting blades with amplified

leverage on the upper blade which can

quickly cause severe injury or loss of

fingers!

Keep fi ngers and hands away

from

moving parts when operating and always

keep blades closed with the Locking Pin

inserted through both the Upper Blade

Hous-

ing and the Body in the

position

(FIG

)

when the tool is not in use.

Wear thick, well fi tting work gloves to• prevent cuts from sharp metal.

Frequently inspect blades. If cracks or chips• develop, discontinue tool use immediately

and replace damaged

blades.

• Always place the handle in the down

SAFETY

INFORMATION

FIG. A

FIG. A1

Ope

STORAGE

•Lower the Upper Blade assembly, insert the Locking Pin through both

the Upper Blade Housing and the Body in the CLOSED position (FIG

A). and Remove Handle.

•Apply a thin fi lm of light oil or a rust-preventive product to all bare steel

areas. CAUTION! The blades are extremely sharp! Use extreme care

when handling to avoid severe cuts or loss of fi ngers!

•Store in a clean, dust-free, dry, dampness free area preferably covered

with plastic sheeting.

MAINTENANCE

NOTE: Maintenance should be performed before each use.

•Check tightness of all hardware.

•Check operation for binding. Lubricate pivot points and gears

periodically with a medium bodied lubricating oil.

•Inspect Blades for cracks, damage or premature wear. Replace if

damaged.

•Clean dirt and debris from Shear Deck.

TROUBLESHOOTING

•PRODUCES A ROUGH, JAGGED CUT:

- Blades out of adjustment. Follow adjustment procedure.

- Worn Blades. Replace blades.

- Material too thick.

•FAILS TO CUT:

- Blades out of adjustment. Follow adjustment procedure.

- Worn Blades. Replace blades. - Material too thick.

ADDITIONAL ITEMS

#11798 Replacement Blades

Table des matières

Autres manuels Eastwood Outils électriques

Eastwood

Eastwood Perfect Panel Prep Tool Manuel utilisateur

Eastwood

Eastwood 54442 Manuel utilisateur

Eastwood

Eastwood 31483 Manuel utilisateur

Eastwood

Eastwood 21640 Manuel utilisateur

Eastwood

Eastwood 21749 Manuel utilisateur

Eastwood

Eastwood B60 Manuel utilisateur

Eastwood

Eastwood 21560 Manuel utilisateur

Eastwood

Eastwood 2-PS Manuel utilisateur

Eastwood

Eastwood 31338 Manuel utilisateur

Eastwood

Eastwood 13630 Manuel utilisateur

Eastwood

Eastwood 30216 Manuel utilisateur

Eastwood

Eastwood 32498 Manuel utilisateur

Eastwood

Eastwood 13622 Manuel utilisateur

Eastwood

Eastwood 21304 Manuel utilisateur

Eastwood

Eastwood 20198 Manuel utilisateur

Eastwood

Eastwood 51460 Manuel

Eastwood

Eastwood 31752 Manuel utilisateur

Eastwood

Eastwood 20198 Manuel utilisateur

Eastwood

Eastwood 31753 Manuel utilisateur

Eastwood

Eastwood 54441 Manuel utilisateur

Eastwood

Eastwood 33862 Manuel utilisateur

Eastwood

Eastwood 13743 Manuel utilisateur

Eastwood

Eastwood 13650 Manuel utilisateur

Eastwood

Eastwood 20644 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel