Duerkopp Adler 467 Mode d'emploi

Autres manuels pour 467

3

Table des matières

Autres manuels Duerkopp Adler Machine à coudre

Duerkopp Adler

Duerkopp Adler Z116 006241 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 173 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 739-23 Caractéristiques techniques

Duerkopp Adler

Duerkopp Adler 530 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 291 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 275 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 558 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 195 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 869 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 579 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 4180i-5 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 175 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 577 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 467 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 2180 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 327 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 744-122 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 745-34 Manuel

Duerkopp Adler

Duerkopp Adler 550-12-23 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 251-140040 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 929 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 467-183080 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 1183i-7 Guide de dépannage

Duerkopp Adler

Duerkopp Adler 961-11-1 Mode d’emploi

Manuels Machine à coudre populaires d'autres marques

Riccar

Riccar RL634DE Manuel utilisateur

Singer

Singer 2517 Manuel utilisateur

Pfaff

Pfaff 3307-1 SERIES Manuel utilisateur

Janome

Janome Quilt Maker Pro 18 VERSA Manuel utilisateur

Siruba

Siruba C007JP Manuel utilisateur

Husqvarna Viking

Husqvarna Viking Designer SE Manuel utilisateur

Singer

Singer 148-5 Manuel utilisateur

IKEA

IKEA SY Manuel utilisateur

Pfaff

Pfaff 571 Manuel utilisateur

Singer

Singer 15-91 Manuel utilisateur

Brother

Brother BB370 Manuel utilisateur

Pegasus

Pegasus WT100 Series Manuel utilisateur

Reliable

Reliable 7100DB Manuel utilisateur

Pfaff

Pfaff 937 Manuel utilisateur

Singer

Singer 6038 Manuel utilisateur

Singer

Singer 413K Manuel utilisateur

Pfaff

Pfaff 1471 E1 Manuel utilisateur

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuel utilisateur

467

Spezialnähmaschine

Serviceanleitung

Service instructions

Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 Bielefeld

Telefon +49 (0) 521 / 9 25-00 • Telefax +49 (0) 521 / 9 25 24 35 • www.duerkopp-adler.com

Ausgabe/Edition: 03/1984 Teile-Nr./Part-No.: 0791 467651

D

GB

General safety instructions

The non-observance of the following safety instructions can cause

bodily injuries or damages to the machine.

1. The machine must only be commissioned in full knowledge of the

instruction book and operated by persons with appropriate

training.

2. Before putting into service also read the safety rules and

instructions of the motor supplier.

3. The machine must be used only for the purpose intended. Use of

the machine without the safety devices is not permitted. Observe

all the relevant safety regulations.

4. When gauge parts are exchanged (e.g. needle, presser foot,

needle plate, feed dog and bobbin) when threading, when the

workplace is left, and during service work, the machine must be

disconnected from the mains by switching off the master switch or

disconnecting the mains plug.

5. Daily servicing work must be carried out only by appropriately

trained persons.

6. Repairs, conversion and special maintenance work must only be

carried out by technicians or persons with appropriate training.

7. For service or repair work on pneumatic systems, disconnect the

machine from the compressed air supply system (max. 7-10 bar).

Before disconnecting, reduce the pressure of the maintenance

unit.

Exceptions to this are only adjustments and functions checks

made by appropriately trained technicians.

8. Work on the electrical equipment must be carried out only by

electricians or appropriately trained persons.

9. Work on parts and systems under electric current is not permitted,

except as specified in regulations DIN VDE 0105.

10. Conversion or changes to the machine must be authorized by us

and made only in adherence to all safety regulations.

11. For repairs, only replacement parts approved by us must be used.

12. Commissioning of the sewing head is prohibited until such time

as the entire sewing unit is found to comply with EC directives.