Doro ALERTACALL 200E Manuel utilisateur
Alertacall 200e
3
4
6
5
1
1 Telephone in use indicator
2 Hanging hook for handset
3 Redial last number
4 Volume control for calls
5 Recall / programming button
6 Memory button
7 Customer Services button
8 I am okay button
English
2
7
8
1
English
Operation
Making a telephone call
1. Pick up the handset and wait for a dialtone.
2. Enter the desired number.
Redial last number
If a number was engaged or if you wish to redial the most recently
entered number, pick up the handset and press the redial button .
Control volume of calls
The handset earpiece volume may be adjusted during a call using .
Hearing loop for hearing aid users
The handset has a built-in hearing loop for those who wish to use their
hearing aids while using the telephone. Select the Tmode on your hearing
aid to enable this feature.
I am okay button
Press this as per instructions given by your
Safety Conrmation provider.
Customer Services button
Pick up the handset and press this button to call your
Safety Conrmation provider.
Memory button
Allows you to store one or more numbers in your telephone,
so it's easier to call them later.
See 'Storing numbers in the telephone' section.
2
English
Settings
Setting up the telephone
1. Connect the telephone cord to a network wall socket and to the T
socket on the back of the telephone.
2. Connect the curly cord to the handset and to the socket marked q
on the side of the telephone.
3. You will hear a click when the modular plug is correctly in place.
4. Lift the handset and listen for the dial tone.
Ringer volume switch
The ringer volume can be adjusted using on the right hand side
of the telephone.
Checking that the 'I am okay' button works
When you rst plug in your telephone we recommend you press the
'I am okay' button.
Wait a minute and then telephone your Safety Conrmation provider, using
the Customer Services button to conrm they received the signal.
Storing numbers in the telephone
The Memory Button can have the number of a friend, relative or contact
assigned to it. This means, that once programmed, with just a single press
of the Memory Button you can ring that person.
You can also store up to a further 10 numbers on the telephone, these can
be accessed by pressing the Memory Button followed by a number 1 to 9
on the keypad.
Assigning a telephone number to the Memory Button
This allows you to call a telephone number simply by lifting the handset
and pressing the Memory Button. We recommend you assign your most
important telephone number to this button.
3
English
1. Make sure the R/Pswitch on the base of the telephone is set to P.
2. Lift the handset and press Pon the front of the telephone.
3. Enter the full telephone number using the keypad.
4. Press and hold the Memory Button for 2 seconds. A red light at the top
of the telephone will ash to conrm the number has been stored.
5. Replace the handset. The number has now been saved.
Note: Please remember to return the R/Pswitch on the base of the telephone to
the R position when you have nished saving your telephone number.
To dial the telephone number simple pick up the handset, wait for a dial-
tone and press the Memory Button. Your number will be dialled.
Storing up to 10 other telephone numbers using the 0 to 9 keys
This will allow you to assign up to 10 telephone numbers to the black
numeric keys 0 to 9.
1. Make sure the R/Pswitch on the base of the telephone is set to P.
2. Lift the handset and press Pon the front of the telephone.
3. Enter the phone number using the keypad.
4. Press the Memory Button followed by a number on the keypad 0 to 9.
A red light at the top of the telephone will ash to conrm the number
has been stored.
5. Replace the handset. The number has now been saved.
6. You can repeat this process choosing a different number 0 to 9 for
each telephone number you wish to store.
Note: Please remember to return the R/Pswitch on the base of the telephone to
the R position when you have nished saving your telephone number.
To dial the telephone number simply pick up the handset, wait for a dial-tone
and press the Memory Button followed by the relevant number 0 to 9.
Please note you must press the relevant number 0-9 within 3 seconds of
pressing the Memory Button.
4
English
Technical Information
There are several switches on the base of the telephone. One of the
switches is used for programming the telephone and the other is used to
make the phone work in other countries.
Recall button timing (100/300)
100 is the standard setting for most countries.
300 for France/Portugal.
R/P
R Normal mode, the R-button works as normal.
PProgramming mode, the R-button is used for programming the
Memory Button.
Troubleshooting
Check the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment, extension cords and other phones.
If the problem is resolved, the fault is with some other equipment.
Test the equipment on a known working line (e.g. at a neighbour’s house).
If the equipment works there the fault is probably with your telephone
line. Please report this to your network operator.
If you are still experiencing difculties, contact the place of purchase.
Guarantee
This product is guaranteed for a period of 12 months from the date of
purchase unless otherwise stated by written agreement. If you experience
any problems please contact the place of purchase. Proof of purchase is
required for any service or support needed during the guarantee period.
This guarantee shall not apply to a fault caused by an accident or a similar
incident or damage, liquid ingress, negligence, abnormal usage or any
other circumstances on the purchaser’s part. Furthermore, this guarantee
will not apply to any fault caused by a thunderstorm or any other voltage
uctuations.
As a matter of precaution, we recommend disconnecting the telephone
during a thunderstorm.
5
English
Help and support
If you cannot resolve any issue using the troubleshooting section,
technical support is available by email on
alertacall200e@safetyconfirmation.com
You may also call your Safety Conrmation provider on the number they
have given you.
Declaration of conformity
Doro hereby declares that the product Alertacall 200e conforms to the
essential requirements and other regulations contained in the directives
1999/5/EC (R&TTE), 2002/95/EC (ROHS).
A copy of the manufacturer’s declaration is available at
www.doro.com/dofc
English
Version 1.0
Table des matières
Autres manuels Doro Téléphone
Doro
Doro Kronos Manuel utilisateur
Doro
Doro airborne 5000 Manuel utilisateur
Doro
Doro PhoneEasy 311C Manuel utilisateur
Doro
Doro congress 205 Manuel utilisateur
Doro
Doro MemoryPlus 319ph Manuel utilisateur
Doro
Doro PHONE EASY Manuel utilisateur
Doro
Doro 6531 Manuel utilisateur
Doro
Doro Audioline AL505 Manuel utilisateur
Doro
Doro 509C Manuel utilisateur
Doro
Doro 514C Manuel utilisateur
Doro
Doro 515C Manuel utilisateur
Doro
Doro HEARPLUS 313CI Manuel utilisateur
Doro
Doro TEL2 Manuel utilisateur
Doro
Doro 909c Manuel utilisateur
Doro
Doro X20 Manuel utilisateur
Doro
Doro Magna 4000 Manuel utilisateur
Doro
Doro MATRA 25 Manuel utilisateur
Doro
Doro AFTI 30 Manuel utilisateur
Doro
Doro 7030 Manuel utilisateur
Doro
Doro MemoryPlus 319i ph Manuel utilisateur
