Directed Electronics Xpresskit CANMAX400 Manuel utilisateur

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

Thank you for purchasing a Directed Electronics, Inc. CANMAX400 solution.

CANMAX400 supports multiple data bus architectures including: CAN High speed, CAN Single Wire, CAN Fault Tolerant,

GM-LAN, J1850, ISO, BEAN, FLEXRAY and more. CANMAX400 includes 2 additional "XPANSION" ports. The XKEY

port securely docks XKEYS for RF transponder bypass when a data override is not possible. A relay XPANSION port

supports the addition of an external relay pack for Remote Start Ready solutions. The 2nd generation XKLOADER2 is

required for flashing CANMAX400.

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

Table of contents

Important information...........................................................................................................................................................3

Your warranty ...................................................................................................................................................................3

Replacement remotes.......................................................................................................................................................3

Caution .............................................................................................................................................................................3

Introduction to the system....................................................................................................................................................3

2-way remote control........................................................................................................................................................4

1-way remote control........................................................................................................................................................5

Transmitter configuration..................................................................................................................................................6

System maintenance........................................................................................................................................................7

Low battery indicator.........................................................................................................................................................7

Battery replacement..........................................................................................................................................................7

Remote control programming..............................................................................................................................................7

Warning – Safety first! .........................................................................................................................................................8

Using the remote starter......................................................................................................................................................9

Remote starting your vehicle............................................................................................................................................9

Points to remember ..........................................................................................................................................................9

Manual transmission.......................................................................................................................................................10

Power save mode..............................................................................................................................................................10

System............................................................................................................................................................................10

2-way remote control......................................................................................................................................................10

Limited one-year consumer warranty................................................................................................................................11

Glossary.............................................................................................................................................................................12

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

Important information

Congratulations on the purchase of your state-of-the-art remote start and alarm system. Due to the complexity of this

system, it must be installed by an authorized dealer only. Installation of this product by anyone other than an authorized

dealer voids the warranty. All dealers are provided with a preprinted dealer certificate to verify authorization.

By carefully reading this Owner’s Guide prior to using your system, you will maximize the use of this system and its

features. You can print additional or replacement copies of this manual by accessing our web site at www.directed.com.

Your warranty

Your warranty registration must be completely filled out and returned within 10 days of purchase. Your product warranty

will not be validated if your warranty registration is not returned. Make sure you receive the warranty registration from your

dealer. It is also necessary to keep your proof of purchase, which reflects that the product was installed by an authorized

dealer.

Replacement remotes

Your system comes with two remote controls – one is 2-way while the other is 1-way. If additional remotes are desired,

please see your authorized dealer or visit www.directedstore.com to order.

Caution

This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in

strict accordance with this guide.

Introduction to the system

Some main features of the CANMAX400 system in Standalone mode:

•Vehicle Security.

•Door, hood, and trunk* monitoring.

Keyless Entry:

•Door locking/unlocking via remote control.*

•Driver’s door priority unlocking.

•Trunk or hatch release.*

•Power sliding door control.*

Remote Start:

•Long-range operation.

•Hood, brake, and other shutdown inputs.

* May require optional parts or installation labor.

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

2-way remote control

* Your remote control may look

different, depending on which product

you have purchased (Clifford, Python

or Viper); however, the features

remain the same.

Function Description

1 Transmit indicator

2 LED indicators Blink to indicate function confirmation.

3 Lock button Press for one second to arm.

4 Unlock button Press for one second to disarm.

5 Remote start button Press for one second to activate remote start.

6 Auxiliary button Press and hold for 1.5 second to activate optional trunk release.

7 Function button Allows access to programming and modifies operation of the other buttons.

8 2-way label Back of remote has a label to identify the remote as 2-way or 1-way.

9 Battery door Remote to access batteries when necessary. See page 7 for more information.

If keypad lock is on, press and then press to exit.

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

1-way remote control

y look ct

res

Function Description

* Your remote control ma

different, depending on which produ

you have purchased (Clifford, Pytho

or Viper); however, the featu

remain the same.

1 Transmit indicator

2 Press for one second to arm.Lock button

3 nlock button Press for one second to disarm.U

4 Remote sta Press for one second to activate remote start.rt button

5 xiliary button Press and hold for 1.5 second to activate optional trunk release.Au

6 Function bu Allows ccess to programming and modifies operation of the other buttons.tton a

7 way1- label Back of remote has a label to identify the remote as 2-way or 1-way.

8 Battery door Remote to a ss batteries when ne ge 7 for more information.cce cessary. See pa

If keypad lock is on, press and then press to exit.

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

Transmitter configuration

The following table provide ry of functi control button:

s a summa

x 0

on levels linked to the remote

Button x 2x 1 x 3

Lock Arm

Unlock

Disarm

Remote start

Auxiliary

unk release AUX 1 AUX 2 AUX 3

Function shift

Function

The button must be pressed and held to access state.

ationsList of commands and confirm

The following table lists the commands performed by each remote button:

Button Command Confirmation

(2-way remote only) Notes

. Lock LED blink for one second with

1 beep and siren tone. Press/hold for 1.5 seconds to Arm

the system and then activate the

Arm Press once to arm

Panic output.

Disarm

Press once to disarm. Lock LED blink for one second with

2 beeps.

Remote start

Press once to active

remote start Remote start LED blinks for 3

secon

ds, remote start tones.

Press and hold

seconds to activ

AUX trunk release. sounds.

for 1.5

ate the The AUX LED comes on for 3

seconds, and AUX activation tone This is an optional feature. See your

sales rep/installer for details.

Press one to three LED indicators turn on (accordi

times, and then press . ng to

the feature command.) Each press and release shifts the

function of the command button.

Function shift

Pressing more than one button simultaneously generates an Error tone and the F-Shift LED turns ON.

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

Out of range notification

If a command is issued from the remote, but the remote is beyond the range of the vehicle to receive the command, the

rem r,

turn

Sin to

be c

ecific mai motes are powered by small coin cell lightweight 3-volt lithium

th roximately one year under normal use. The 2-way remote uses two CR2016 cell batteries and

the 1 ay r ken, the operating range will be reduced.

Low battery indicator

When the batteries are low on the 2-way re the LED will flash, and the alarm will

emit an additional chirp to let y W en the battery is low on the 1-way remote, the

remote res

ote will respond with an Out of Range notification. If this occurs, the remote will Blink rapidly the transmit indicato

on the F indicator and play the error tone.

ce conditions will vary in different areas (i.e.: Weather, RF interference, etc) range may be affected and require you

loser to the vehicle for successful transmission.

System maintenance

The system requires n

batteries o sp

at will last app ntenance. Your re

-w emote uses one CR2032 cell battery. When the battery begins to wea

mote it will emit two groups of beeps,

ou know it’s time to change the battery. h

ponds the same, but without the LED flash.

The Arm/Disarm chirp chirps during disarming. Ask

your authorized dealer if

Battery replacement

Slide the door up to e the

remote control. When p

s should be programmed ON for the alarm to emit any additional

you have any questions.

xpose the battery beneath the holder. Remove the expired battery. Place the new battery into

ower is returned the remote control is ready for use.

Remote control prog

The 2-way control has me trol module including adjusting the

contro od

To program the remote u

1. Press and hold the

2. The remote emits one lon beep, and th

3. Press and hold the butt

The remote beeps two-tim Transmit LED blinks two-times and stays on. You are now in the Remote

rt & Aux LEDs will turn ON, and/or blink to indicate the current remote feature

ramming

remote

ule onboard s nus for programming the remote to the system con

nl m hock se sor, and for configuring the remote control user features.

ser features:

button for 12 seconds: (at 3 seconds ignore the Car number indicator.)

g e Transmit LED turns on. This indicates the Main menu.

on for 1.5 seconds:

es, and the

Configuration menu.

The Arm, Disarm, Remote Sta

configuration. When the LED is ON, the feature is ON.

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

To configure the remote control features press and release the command button. The LED next to the button will turn ON

then OFF. The remote beeps to indicate the feature configuration.

Button Command

Confirmation

Auto-button lock •When Arm LED is OFF, buttons will not lock.

•LED ON: The buttons automatically lock 60 seconds after the last button operatio

avoid accidental Command operations. When locked, if any command button is n to

pressed the remote will emit an error output.

en .If button lock is ON, press , and th

Remote beeps •Disarm LED OFF: The remote will not emit beeps except wh

rm LED ON: The remote will emit beeps normally. en programming.

LED blinking: The remote will emit beeps only for alarm trigger messages from

system.

•Disa

•Disarm

the alarm

Runtime low

alert feature This feature is not available on the 1-way remote.

•Remote Start LED OFF: The remote will ignore Runtime Low Alert messages.

•Remote Start LED ON: The remote will emit feedback output for Runtime Low Alert

messages.

These messages will be automatically sent while Remote Start is ON to alert you when the

runtime remaining is at 3 minutes, and again at 1 minute before shut down.

Page

mode/Power

saver

This feature is not available on the 1-way remote.

•Aux LED OFF: The remote will not wake up and listen for messages from the system

to extend battery life. Note: This means the remote will not receive alarm trigger page

•Aux LED ON: the remote will wa s.

ke up to listen for messages from the system.

•Aux LED blinking: Power saver mode (see note below).

Power saver automatically turns off the remote pager if a button on the remote has not

been pressed for more than 72 hours and will be restored after any button on the remote

pressed.

Warning – Safety first!

The following safety warnings must be

Due to the complexity of this system, in

observed at all times:

stallation of this product must only be performed by an authorized Directed dealer.

rt the vehicle via a command signal from the remote control transmitter.

closed area or partially enclosed area without ventilation (such as a garage).

he remote start system must

keep out of reach

start the vehicle.

ING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY

ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole

ave your car in neutral. You must read this Owner’s Guide to familiarize yourself with the proper procedures

regarding manual transmission remote starters. If you have any questions, ask your installer or contact Directed at 1-800-

When properly installed, this system can sta

Therefore, never operate the system in an en

When parking in an enclosed or partially enclosed area or when having the vehicle serviced, t

be disabled using the installed toggle switch. It is the user’s sole responsibility to properly handle and

from children all remote control transmitters to assure that the system does not unintentionally remote

THE USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO

THE VEHICLE. ALL DOORS LEAD

responsibility of the user.

Remote starters on manual transmission vehicles operate differently than those with automatic transmission because you

must le

753-0600.

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

Before remote starting a manual transmission vehicle, be sure to:

e vehicle.

engaged

contrary to its intended mode of operation may result in property damage, personal injury,

ser must also have the neutral safety feature of the vehicle periodically checked, wherein the

the car is in gear. This testing should be performed by an authorized Directed dealer

outlined in the product installation guide. If the vehicle starts in gear, cease remote

t with the authorized Directed dealer to fix the problem.

been installed, contact your authorized dealer to have him or her test the remote start

k outlined in the product installation guide. If the vehicle starts when performing the

remote start unit has not been properly installed. The remote start module must

be rem vehicle does not start in gear. All

RTS IN GEAR IS CONTRARY TO ITS

INTENDED MODE OF OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY

MEDIATELY CEASE THE USE OF THE

E ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE

LE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR

•Leave the vehicle in neutral and be sure no one is standing in front or behind th

•Only remote start on a flat surface

•Have the parking brake fully

Use of this product in a manner

or death. (1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the

keys in the ignition. The u

vehicle must not remotely start while

in accordance with the Safety Check

start operation immediately and consul

After the remote start module has

module by performing the Safety Chec

Neutral Safety Shutdown Circuit test, the

oved or the installer must properly reinstall the remote start system so that the

installations must be performed by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STA

RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IM

UNIT AND SEEK TH

INSTALLED REMOTE START MODU

INSTALLATION OR REINSTALLATION COSTS.

Using the remote starter

le parking lights flash.

indicator blinks and ascending Remote Start tone plays.

zed

If the hood is open or is the brake pedal is pressed, the vehicle will not start using remote start. The remote starter shuts

mote Start command is sent again from a remote control.

Remote starting your vehicle

•Press the button on the remote control. The vehic

•On the 2-way remote, the Remote Start

The preset remote start run time is 12 minutes. This can be changed to between 12 and 60 minutes (see your authori

dealer for programming changes).

Points to remembe

down:

•When the brake pedal is pressed.

•The hood is opened.

•If the alarm is triggered when armed.

•When the Re

User guide

CANMAX400 Standalone

Revision: 16-Nov-09

Manual transmission

If the vehicle has manual transmission the proper steps must be followed before leaving the parked vehicle or the remote

start feature is disabled.

1. Put the transmission in neutral.

2. Press on the vehicle’s foot brake.

3. Apply the emergency brake.

4. Release the vehicle’s foot brake.

Pressing the brake again after this step will disable the remote start feature.

5. Within 15 seconds activate the remote start from the remote.

6. The parking lights will flash confirming that the remote start is active.

7. Turn off the ignition (the car should stay running when key is turned off).

8. Exit the vehicle.

9. Arm the alarm (the vehicle should shut off when arming the system).

You can now remote start the vehicle. If a door is opened or if the alarm is triggered before the next remote start activation

the system will not remote start.

To drive your vehicle after it has been remote started:

1. Get in without stepping on the brake.

2. Insert the ignition key and turn it to the ON position.

3. Now, step on the brake.

The remote control will play the remote start shutdown tone. You have now taken direct control from the remote start

system.

Power save mode

System

Your system will automatically enter Power Saver Mode while armed after a period of time in which no operation has been

performed. This lowers the current draw on the vehicle’s battery. Power Saver Mode takes over under the following

conditions:

Power Saver when the system is armed: After the system has been armed for 24 hours the LED will flash at half its

normal rate, decreasing the system’s current draw.

2-way remote control

Your 2-way remote control has a feature called remote power save mode. When programmed ON under remote options,

the remote will conserve power by disabling the paging function if unused for more than 72 hours. Pressing any button on

the remote will restore the paging function.

The default setting is ON. See Remote control programming section of this guide or ask your dealer for details on how to

program.

Table des matières

Autres manuels Directed Electronics Démarreur à distance

Directed Electronics

Directed Electronics Python 580 Manuel utilisateur

Directed Electronics

Directed Electronics AS-1271 Manuel utilisateur

Directed Electronics

Directed Electronics Rattler 259D Manuel utilisateur

Directed Electronics

Directed Electronics AVITAL 4003 Manuel utilisateur

Directed Electronics

Directed Electronics READY REMOTE 24921 Manuel utilisateur

Directed Electronics

Directed Electronics 440HP Manuel utilisateur

Directed Electronics

Directed Electronics Automate 552 Manuel utilisateur

Directed Electronics

Directed Electronics Python 1401 Manuel utilisateur

Directed Electronics

Directed Electronics AutoCommand 28624T Manuel utilisateur

Directed Electronics

Directed Electronics Ready Remote 23926 Manuel utilisateur

Directed Electronics

Directed Electronics BOA 165B Guide de démarrage rapide

Directed Electronics

Directed Electronics AS-1775 Manuel utilisateur

Directed Electronics

Directed Electronics 4400 Manuel utilisateur

Directed Electronics

Directed Electronics 553 Manuel utilisateur

Directed Electronics

Directed Electronics SmartStart 5000-series Manuel utilisateur

Directed Electronics

Directed Electronics READY REMOTE 24923 Manuel utilisateur

Directed Electronics

Directed Electronics PYTHON 413 Manuel utilisateur

Directed Electronics

Directed Electronics AS-1775 Manuel utilisateur

Directed Electronics

Directed Electronics PS-3655E-FM Manuel utilisateur

Directed Electronics

Directed Electronics XK811 Manuel utilisateur

Directed Electronics

Directed Electronics Xpresskit Xpressparts Series Manuel utilisateur

Directed Electronics

Directed Electronics 4103 Series Manuel utilisateur

Directed Electronics

Directed Electronics 3200HS Manuel utilisateur

Directed Electronics

Directed Electronics AutoCommand 28624TN Guide de démarrage rapide

Manuels Démarreur à distance populaires d'autres marques

AstroStart

AstroStart 803U Manuel utilisateur

Durite

Durite 0-649-20 Manuel

EINHELL

EINHELL BT-PS 1000 Manuel

Linear

Linear ACCESS AK-21 Caractéristiques techniques

Soundstream

Soundstream TARANTULA RS.2 Manuel utilisateur

Jaycar Electronics

Jaycar Electronics MB3752 Manuel utilisateur

Ultra Start

Ultra Start 72 Series Manuel utilisateur

ADS

ADS FLASHLOGIC FLRSVW1 Manuel utilisateur

Selecta

Selecta JS012 Manuel utilisateur

Black Widow Security

Black Widow Security BW RAS 400 Manuel utilisateur

Vector

Vector Power City DK080706 Supplément

Code Alarm

Code Alarm CA-535 Manuel utilisateur

Ozito

Ozito OJS-800 Manuel utilisateur

Profi-Partner

Profi-Partner 46387 Manuel utilisateur

EZ STARTER

EZ STARTER EZ-45 Manuel utilisateur

Viper

Viper 4204 Manuel utilisateur

Essex Electronics

Essex Electronics KE-1701 Manuel utilisateur

EINHELL

EINHELL EGS 3600 Manuel