Digitus DS-12890 Manuel utilisateur

KVM Switch, 4-Port, 4K60Hz,

4 x DP in, 1 x DP/HDMI out

Quick Installation Guide

DS-12890

Contents

1. INTRODUCTION ............................................................................... 3

2. PACKAGE CONTENTS ....................................................................... 3

3. FEATURES......................................................................................... 4

4. PANEL DESCRIPTION........................................................................ 5

5. SPECIFICATIONS............................................................................... 7

6. CONNECTION AND OPERATION ...................................................... 8

7. CONNECTION DIAGRAM................................................................ 11

8. POWER ADAPTER INFORMATION.................................................. 12

DEAR CUSTOMER

Thank you for purchasing this product. For optimum performance and safety, please

read these instructions carefully before connecting, operating or using this product.

Please keep this manual for future reference.

1. INTRODUCTION

This is a high-performance DP-KVM switcher. It routes high definition video (in

multiple resolutions up to 4kx2k@60Hz) and audio from any one of the several

sources to display units. This DP-KVM switcher not only has the key-press-switching

function, but also has intelligent function as well as hot pluggable function.

2. PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the

following items are contained in the shipping carton:

•1 x KVM Switch, 4-Port, 4K60Hz, 4 x DP in, 1 x DP/HDMI out

•1 x Power adapter for KVM switch

•4 x USB 3.0 connection cable (USB B to USB A)

•4 x DisplayPort™ cable 1.2 m

•1 x Infrared remote control

•1 x Infrared recipient with connection cable

•2 x Mounting bracket for table/wall installation

•1 x User manual

3. FEATURES

•Support resolution up to 4Kx2K@60Hz

•Support RGB 4:4:4/ YCbCr 4:4:4/ YCbCr 4:2:2/ YCbCr 4:2:0

•Support KVM function

•Support a display (Either DP or HDMI) and a set of Keyboard and Mouse to

control four PCs with DP ports

•DisplayPort:

Support 8.1Gbps per channel (32.4Gbps all channels) bandwidth

Support 16bit per channel (48bit all channels) deep color

Support HDR

Note: Theoretically, DP resolution can be up to 8K, it is to be verified on

DP1.4 Graphic cards and 8K DP display

•HDMI:

Support 6Gbps per channel (18Gbps all channels) bandwidth

Support 12bit per channel (36bit all channels) deep color

Support HDCP 2.2/1.4

Support HDR

•Support infrared remote control function

•Support for switching LED indications

•Support Windows 2000/XP/Vista/Win7/Win8/Win10/Win11 and above /

Linux/ Apple Mac OS

4. PANEL DESCRIPTION

Front Panel

1) Power Button: Press to turn on/off the unit.

2) Power Indicator: The LED will light up once the DC/5V is provided and the unit is

turned on.

3) Input Selection: When PC1/PC2/PC3/PC4 is selected, the corresponding “Select”

lights up to indicate input selection (“Select” LEDs flash in a loop under

automatic switching mode). “Online” LED lights up when the corresponding

USB-B port is connected.

4) IR EXT: Connect IR Extender to this port for IR signal reception from the remote

control.

5) IR: For IR signal reception from the remote control.

6) : 3.5mm MIC input port.

7) : 3.5mm stereo output port.

8) : USB 3.0 ports, mainly used for connecting to printers, scanners, U-disk, etc.

Back Panel

9) Output ports:

Connect to a mouse or a keyboard.

Connect to a keyboard or a mouse.

Connect to an amplifier.

Connect to a MIC.

Connect “HDMI Out” to HDMI display.

Connect “DisplayPort Out” to DP display.

10) PC1 input ports:

Respectively connect to DisplayPort, USB, MIC, stereo ports of PC1.

11) PC2 input ports:

Respectively connect to DisplayPort, USB, MIC, stereo ports of PC2.

12) PC3 input ports:

Respectively connect to DisplayPort, USB, MIC, stereo ports of PC3.

13) PC4 input ports:

Respectively connect to DisplayPort, USB, MIC, stereo ports of PC4.

14) DC 5V: Plug the 5V DC power supply into the unit.

5. SPECIFICATIONS

Connectors

Console Connectors

•USB 2.0-A x2 (Back)

•DisplayPort Female x1 (Back)

•HDMI Female x1 (Back)

•3.5mm Stereo Jack (Green, 1 Front, 1 Back) x2

•3.5mm Stereo Jack (Pink, 1 Front, 1 Back) x2

KVM Connectors

•USB 3.0-B x4 (Back)

•DisplayPort Female x4 (Back)

•3.5mm Stereo Jack (Green, Back) x4

•3.5mm Stereo Jack (Pink, Back) x4

USB HUB Connectors

•USB 3.0-A x2 (Front)

Resolution

Max Resolution

3840*2160@60Hz,

4096*2160@60Hz

Operating Frequency

HDMI Bandwidth

18G

DisplayPort Bandwidth

32.4G

Mechanical

Material

Metal

Size (L-W-H)

243*75*26mm

Weight (Net)

505.4g

Environmental

Operating Temperature

0°C to 45°C

Operating Humidity

10% to 85 % RH (no condensation)

Storage Temperature

-10°C to +80°C

Storage Humidity

5% to 90 % RH (no condensation)

Power Requirement

External Power Supply

DC 5V

Power Consumption (Max)

11.75W

ESD Protection

Human Body Model

±8kV (air-gap discharge) &± 4kV (contact discharge)

6. CONNECTION AND OPERATION

Operation

1) Connect PCs to USB-B ports of the unit with USB cables; Respectively connect

MIC and stereo ports of the PCs to those(above the “DisplayPort In”) of the unit

with 3.5mm audio cables; Connect PCs to “DisplayPort In” ports of the unit with

DisplayPort cables.

2) Connect keyboard and mouse to the USB-A ports on the back panel of the unit;

Respectively connect microphones and amplifiers to the mic and stereo ports(on

the front panel/above “DisplayPort Out”) of the unit with 3.5mm audio cables;

Connect a display to “DisplayPort Out” of the unit with a max 2m DisplayPort

cable.(Or connect a display to “ HDMI Out” of the unit with an HDMI cable)

Note: When either “DisplayPort Out” or “HDMI Out” is connected, video is

output by the connected port automatically; When two of them are

conncected, video is output by DisplayPort.

3) Power the unit with DC 5V and press the power button, the “Power” indicator

lights up.The USB-B ports are connected normally and the “Online” indicators

light up. “Select” lights up to indicate the current selected PC.

4) Press the buttons on the front panel of the unit to select input, the

corresponding “Select” lights up. After selection, the display shows

corresponding image and the selected PC can be controlled by a set of keyboard

and mouse.

5) Remote control works the same as manual buttons.

1,2,3,4: For input selection. 1 specifies PC1, 2 specifies PC2,

3 specifies PC3 and 4 specifies PC4.

, For loop switching. Order: PC1→PC2→PC3→PC4→PC1….

6) For external function, connect printer/scanner/U-disk to the USB-A ports on the

front panel of the unit.

Special Function Operation:

1) Mouse traversal function:

Place the mouse on the far right side of the display and continue to slide to the

right for 2 seconds, the unit automatically switches to the next port. Switching

order is : PC1→PC2→PC3→PC4→PC1→…;

2) USB-B detection switching function:

•When the unit detects that a PC is connected to the USB-B port of the unit,

the unit immediately switches to this PC and the corresponding “Online” and

“Select” indicators light up.

(For example: When PC1 is connected already, PC3 is connected to the unit

through USB-B port, then the unit immediately switches to PC3.

•When the current selected PC is powered off or the USB cable is dialed out,

the unit automatically switches to the next PC with the power on and the USB

port connected.

3) Hotkey function

(It doesn’t work on functional keyboard and only the 2 USB-A ports on the back

panel can get access to this function.)

Number

Hotkey Combination

Function Description

Scroll Lock++1Scroll Lock +→or↓

Switch to the next port

Scroll Lock++ Scroll Lock +←or↑

Switch to the previous port

Scroll Lock++ Scroll Lock +[N2]

Switch to PC N

Scroll Lock++ Scroll Lock +S3

Automatic switching function

(Default: 15 seconds)

Scroll Lock++ Scroll Lock +I+[N4]+[Enter]

Set the automatic

switching interval

(5~999 seconds)

Scroll Lock++ Scroll Lock +B+[1/0]5

Buzzer on/off

(Default: on)

Scroll Lock++ Scroll Lock

+F+L+A+S+H+[Enter]

All resume hotkey

default mode

Note

•Hot keys are not case-sensitive;

•Buzzer sounds when switching between PC1 PC2, PC3 and PC4.

1“++” means to press 2 times in rapid succession. For example: “Scroll Lock ++ Scroll Lock + 1” means to

press the Scroll Lock button twice in rapid succession and then press number “1” button. The detection

between each hotkey code times out for 5 seconds. For example, if the Scroll Lock button is pressed for

the first time, and then the Scroll Lock button is pressed after more than 5 seconds, the hotkey

combination is invalid;

2“N” here indicates the number of the PC. For example, to switch to PC2, the hotkey combination is

“Scroll Lock ++ Scroll Lock + 2”;

3 Turn on this function, then DisplayPort, MIC and the speaker will enter the automatic switching mode

without USB. Press (except the space bar) any key to exit to the port before the automatic switching,

press the space bar to stay at the currently switched port. When switching automatically, the “Select”

LED flashes at the same time.

4“N” here indicates the number of switching interval which can be 5(seconds) to 999 (seconds);

5 “1” means on, “0” means off;

6This mode only has relation to the hotkey function of Number 4 and Number 6.

Table des matières

Autres manuels Digitus Changer

Digitus

Digitus DN-50012-1 Manuel utilisateur

Digitus

Digitus DN-80063 Manuel utilisateur

Digitus

Digitus DN-80113 Manuel utilisateur

Digitus

Digitus DN-95140 Manuel utilisateur

Digitus

Digitus DA-70240-1 Manuel utilisateur

Digitus

Digitus DN-650102 Manuel utilisateur

Digitus

Digitus DS-45329 Manuel utilisateur

Digitus

Digitus DS-44100 Manuel utilisateur

Digitus

Digitus DN-95331 Manuel utilisateur

Digitus

Digitus DS-12423 Manuel utilisateur

Digitus

Digitus DN-651154 Manuel utilisateur

Digitus

Digitus Pocket USB KVM switch Manuel utilisateur

Digitus

Digitus DN-95639 Manuel utilisateur

Digitus

Digitus DS-11200-1 Manuel utilisateur

Digitus

Digitus DS-12404 Manuel utilisateur

Digitus

Digitus DN-95341-1 Manuel utilisateur

Digitus

Digitus DS-45341 Manuel utilisateur

Digitus

Digitus DS-45305 Manuel utilisateur

Digitus

Digitus DS-12851 Manuel utilisateur

Digitus

Digitus DN-651132 Manuel utilisateur

Digitus

Digitus DN-80212 Manuel utilisateur

Digitus

Digitus DS-12880 Manuel utilisateur

Digitus

Digitus DS-12820 Manuel utilisateur

Digitus

Digitus DA-70224-1 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur