Digitus DN-95359 Manuel utilisateur
24 Port L2 Managed
Gigabit Ethernet PoE
Switch
Quick Installation Guide
DN-95359
2
1. Introduction
The DN-95359 is a manageable 24 +2 port PoE switch with L2 features.
It is mainly used in the structural LAN area. With a total PoE power
budget of 430 watts, the DN-95359 supplies up to 24 connected PoE
devices such as IP security cameras or VoIP telephones with up to 30
watts per port. Due to the large backplane bandwidth of 52 Gbps, data
can be processed and forwarded quickly. Furthermore, features
such as ICMPv6, IGMP & MLD snooping, port mirroring, broadcast
storm filter and many more are supported.
2. Features
1. Provides 24 10/100/1000 Base-TX ports + 2 gigabit SFP ports,
Provides 24 PoE injector.
2. Build-in power supplies, 450W, High back-plane bandwidth
52Gbps.
3. Support ICMPv6, IPv6 Neighbor Discovery,MLD Snooping, IPv6.
Telnet, standard IP/ Extend IP / MAC IP / ARP ACL, IGMP snooping
for multi-media application.
4. Support Port mirror and bandwidth control, IEEE802.3x Flow
control.
5. Support Port Based VLAN / 802.1Q Tag VLAN, IEEE802.3ad Port.
Trunk with LACP.
6. Support Spanning tree protocol IEEE802.1d/802.1w/802.1s.
7. Support IEEE 802.1p class of service, IEEE 802.1x user
authentication.
8. Support Broadcast storm filter, System event log, command line
interface management.
9. Management by Web / SNMP / SSH / Telnet (IPv6 ready) /
Console.
3
3. Package Contents
1 x DN-95359 24 Port PoE Switch
1 x User Manual
1 x Power Cord
1 x DB9 to RJ45 Cable
1 x Rack Mount Kit
4 x Rubber Feet
4. Specification
Networking Interfaces
24 x 10/100/1000 Mbps RJ45 Ethernet
Ports
2 x 1 Gbps SFP Ethernet Ports
Management Interface
Console
LED Indicators
Power, Link/Act, PoE
Performance
Switching Capacity
52 Gbps
Forwarding Capacity
38.7 Mpps
Forwarding Mode
Store and Forward
Packet Buffer Memory
4.1 Mbit
RAM for CPU
1 Gbit
Flash Memory
128 Mbit
MAC Address Table
8K
Max. Jumbo Frame size
16K
VLAN Quantity
4K
ACL Table
512
L3 Interface
32
Port Queues
8
PoE Budget
430W
Physical
Dimensions
440 x 200 x 44 mm
4
Operating Temperature
0 to 40℃
Storage Temperature
-10 to 70℃
Operating Humidity
5 to 95% Noncondensing
Power Method
100-240VAC, 50/60Hz
Max. Power
Consumption
Including PoE Output: 450W
Excluding PoE Output: 20W
Power over Ethernet
PoE Interfaces
Ports 1-24
PoE Standard
IEEE802.3af, IEEE802.3at
Max. PoE Wattage per
Port
30W
PoE Voltage
52VDC
PoE Pin Assignment
V- (RJ45 Pin1,2), V+ (RJ45 Pin 3,6)
PoE Management
Port-base PoE status view and control,
PoE Schedule, PD Alive Auto Check
Port Configuration
Enable and Disable
Support control enable and disable
Auto-Negotiation
Support force port mode and speed
Flow Control
Support IEEE802.3x full-duplex
Support half-duplex backpressure
Storm Control
Support broadcast, multicast and DLF
package rate limit
Port Mirroring
Support many to one mirroring
Rate Limit
Support Port input and output rate
limit
Link Aggregation
Support manual Link Aggregation
Support LACP
Up to 8 maximum aggregation groups,
each containing up to 8 ports
Aggregation Strategy
Source MAC / Destination MAC /
Source Destination MAC
5
Source IP / Destination IP / Source
Destination IP
Port Protection
Each port can be configured into
isolated protected port from each
other
MAC Configuration
MAC Address Table
Management
Support
Transfer Mode
Support IVL transfer mode
Static MAC Address
Support
MAC Binding
Support
MAC Address Filter
Support
MAC Quantity Limitation
Support limit the number of MAC-
addresses Learning per port
VLAN Configuration
VLAN Based on 802.1Q
Support
MAC-Based VLAN
Support
IP-Based VLAN
Support
Protocol-Based VLAN
Support
Voice VLAN
Support
Guest VLAN
Support
Private VLAN
Support
VLAN Mapping
Support 1:1 mapping
Double VLAN Markup
Support basic QinQ
Reliability Protocol
Spanning Tree
Support STP/RSTP/MSTP
BPDU Guard
Support
BPDU Filter
Support
Port Loop Detection
Support
EAPS Protocol
Support RFC3619
ERPS Protocol
Support G.8032/Y.1344
6
LLDP Protocol
Support LLDP and LLDP-MED
UDLD Protocol
Totally compatible with UDLD protocol
of CISCO
Host Routing
Static ARP
Support
Static Routing
Support
Multicast
Static Multicast MAC
Address
Support
IGMP SNOOPING
Support
MVR
Support
GMRP
Support
Access Control List (ACL)
Based on Standard IP
Support
Based on Extend IP
Support
Based on MAC IP
Support
Based on MAC ARP
Support
Based on time
Support
Port Filtering
Support
Quality of Service (QOS)
Scheduling Mode
Support WRR, SP, WFQ
Sorting Based on Port
Support
Sorting Based on 802.1p
Support
Sorting Based on DSCP
(DiffServ)
Support
Sorting Based on ACL
Data Flow
Support
QoS Strategy
Support packet mapped to the
corresponding output queue
Support to modify the packet’s COS
and DSCP sign
7
Support limit of data flow
Support statistics of data flow
Support mirroring of data flow
Security
Administrative Security
Support start and end TELNET, WEB
and SNMP serve
Support TELNET, WEB and SNMP serve
binding with Standard IP ACL
Support control the number of user
for TELNET
CPU Protect
Switch self-security protect, forbid
flow attack
IP-MAC Address Binding
Support binding between static
configuration IP, MAC and Port
AAA
Support 802.1x protocol
Support RADIUS protocol
Support RADIUS server authentication
authorization and bill
Support MAC-based 802.1X
authentication.
Support 802.1x guest VLAN
DHCP SNOOPING
Support dynamic ARP binding to
prevent ARP spoofing
Support dynamic IP, MAC port binding
Support stationary port connect to
DHCP server, to prevent privately
connect to DHCP sever
Prevent ARP Spoofing
Support manual configure ACL rule
based on MAC ARP prevent ARP
spoofing
Support DHCP SNOOPING function,
switch dynamically binding ARP and
8
port, when the DHCP get IP address ,
to prevent ARP spoofing
IPv6
ICMPv6
Support
IPv6 Neighbor Discovery
Support
MLD Snooping
Support
IPv6 Telnet
Support
Management Feature
CLI Management
Support serial port management
Support TELNET management
Support SSH management
WEB Management
Support
SNMP Management
Support SNMP protocol
Support SNMP TRAP
Support standard and private MIB
User management
Support multi-user management
Show CPU Utilization
Support
Show RAM Utilization
Support
TACACS+
Support TACACS+ server remote user
name and password authentication
Support PAP and CHAP password
encryption
Support TACACS+ server command
authorization
Log Management
Support
RMON
Support RMON 1,2,3,9 group
Cluster Management
Support neighbor discovery protocol
Support topology discovery protocol
Support manual and automated join
cluster group
Support cluster unification
management
9
OAM
Support 802.3ah
Support 802.1ag
DHCP Client
Support
Configuration Download
/ Upload
Support
Upgrade Firmware
Support
Timer Management
Support local timer management
Support SNTP protocol get clock
Debugging Tools
PING
Support
TRACEROUTE
Support
TELNET Client
Support
5. Panel infomation
Front panel
PWR LED：The Power LED lights up when the Switch is connected to a
power source.
Link/Act LED: The Link/Act LED flashes which indicates a network link
through the corresponding port. Blinking indicates that the Switch is
either sending or receiving data to the port.
PoE LED:
Green: Indicates the PoE powered device (PD) is connected and the
port supplies power successfully.
Light off: Indicates no powered device (PD) connected.
10
Real panel
Power input: Supports input voltages 100-240VAC, 50/60Hz.
Switch: turn on the switch after inserting the power cord, “I” means to
turn on, “O” means closing.
Grounding: use specialized ground lead connect
6. Hardware installation
This chapter provides unpacking and installation information for the
switch.
6.1 Switch installation
For safe switch installation and operation, it is recommended that
you:
Visually inspect the power cord to see that it is secured fully to
the AC power connector.
Make sure that there is proper heat dissipation and adequate
ventilation around the switch.
Do not place heavy objects on the switch.
Table des matières
Autres manuels Digitus Changer
Digitus
Digitus DS-40135 Manuel utilisateur
Digitus
Digitus DS-16100 Manuel utilisateur
Digitus
Digitus DA-70255 Manuel utilisateur
Digitus
Digitus DN-95320 Manuel utilisateur
Digitus
Digitus DN-80113 Manuel utilisateur
Digitus
Digitus DS-48304 Manuel utilisateur
Digitus
Digitus DS-12404 Manuel utilisateur
Digitus
Digitus DN-95345 Manuel utilisateur
Digitus
Digitus DC-71301 Manuel utilisateur
Digitus
Digitus DN-95347-1 Manuel utilisateur
Digitus
Digitus DN-80068 Manuel utilisateur
Digitus
Digitus DA-70221 Manuel utilisateur
Digitus
Digitus DA-70231 Manuel utilisateur
Digitus
Digitus DN-651109 Manuel utilisateur
Digitus
Digitus DA-70241 Manuel utilisateur
Digitus
Digitus DS-45311 Manuel utilisateur
Digitus
Digitus DN-80202 Manuel utilisateur
Digitus
Digitus DS-12423 Manuel utilisateur
Digitus
Digitus DS-15202-1 Manuel utilisateur
Digitus
Digitus DS-11200-1 Manuel utilisateur
