Digitus OVER CAT.5 Manuel utilisateur

USB KVM EXTENDER

OVER CAT.5

User’s Manual

DS-52100

- 1 -

Index

INTRODUCTION ........................................................................................................................ 2

1.1

EATURES

.............................................................................................................. 3

1.2

ACKAGE

ONTENTS

.............................................................................................. 3

1.3

PECIFICATIONS

..................................................................................................... 4

INSTALLATION.......................................................................................................................... 5

2.1

YSTEM

EQUIREMENTS

........................................................................................ 5

2.2

HYSICAL

IAGRAM

................................................................................................ 6

2.3

ARDWARE

NSTALLATION

....................................................................................... 8

OPERATIONS ............................................................................................................................ 9

3.1

CTIVE

ONSOLE

ELECTION BY

USH

UTTON

...................................................... 9

3.2

LED

NDICATORS

.................................................................................................... 9

3.3

UZZER SOUND

ISABLE

NABLE BY

OTKEY

.......................................................11

3.4

ICRO

YSTEM

UNCTION

MULATION

................................................... 12

- 2 -

1 Introduction

Thank you for purchasing the USB KVM Extender over Cat.5.

This KVM extender allows you to extend the computer’s video and USB keyboard/mouse signal.

Therefore, you now have a high quality and durability extension solution to control your system up to

200 meters away from your computer or KVM. With the built-in video and keyboard/mouse signal

enhancement, you can gain the best video resolution quality. Additional software is not required. This

product delivers perfect performance and high value to satisfy your needs.

The USB KVM Extender over Cat.5 comprises a local unit (transmitter) and a remote unit (receiver).

The local unit is connected directly to the computer (or a KVM switch system) using the supplied cables.

The user console (keyboard, mouse and monitor) is attached to the remote unit.

The remote and local units extend the keyboard, mouse and video signal along the Cat5/5e/6 cable.

Moreover, the local unit offers dual access, enabling the connection of a second user console close to

the computer.

Local Unit: Transmitter

Remote Unit: Receiver

- 3 -

1.1 Features

1. Extends the Keyboard / Video / Mouse signal by a Cat5/5e/6 cable.

2. Dual console operation - Control your system from both the local and remote unit.

3. Push button at local side to select active console.

4. Available active console options: local console / remote console / both consoles.

5. Supports connection of USB keyboard/mouse for local and remote console arbitrarily.

6. Supports keyboard/mouse connection of USB interface to computer at local side arbitrarily.

7. Supports high resolution video - Up to 1280x1024 @ 60Hz for distances of up to 200 meters.

8. Supports VGA, SVGA and multisync monitors.

9. DDC2B support for remote monitor.

10. Adjustable control of focus and brightness to improve video quality at remote side.

11. No software or driver installation required.

12. Compatible with most commonly used operating systems like DOS, Windows

98SE/ME/2000/XP/2003 Server/Vista/7, Linux, Mac OS9/OSX and Sun Microsystems.

13. Supports BIOS level operation.

14. Plug and Play.

15. Supports Microsoft Intellimouse 3 ~ 5 key mouse & Microsoft Natural Keyboard Pro series.

16. Supports SUNMICRO system function key emulation.

17. LEDs on each device to indicate the active console and connection status.

18. Firmware upgradeable.

1.2 Package Contents

The product you purchased should contain the equipment and accessories shown as follows:

1. 1 x Local Unit

2. 1 x Remote Unit

3. 1 x Custom combo 4-in-1 cable.

4. 2 x External power adaptor DC 5V 2A

5. 1 x User’s Manual

- 4 -

1.3 Specifications

MODLE NAME DS-51200

Transmitter Receiver

Console

Connectors

VGA Output HDB-15 ( Female ) HDB-15 ( Female )

USB

Keyboard USB Type A (Female) USB Type A (Female)

mouse USB Type A (Female) USB Type A (Female)

PC Connectors Video (KB/MS)

HDB-15 ( Female )

(PS/2 & USB signal

combined)

N/A

Extension Port RJ-45 FOR KB/MS/VGA Extension

Video Adjustment

Focus

N/A

1 x VR

Brightness 1 x VR

LED indicator

Local

Selected Right Red LED Right Red LED

Active Right Green LED Right Green LED

Remote

Selected Left Red LED Left Red LED

Active Left Green LED Left Green LED

Local / Remote Switch Button Yes. No.

DDC Supported REMOTE Support DDC2B

Extension Cable Type & Length CAT5, CAT5E, CAT6. Max. Length : 200M

Video Resolution

1920 x 1200 – 50 m

1600 x 1200 – 100 m

1400 x 900 – 150 m

1280x1024(60HZ)@200m

Firmware Upgrade Yes

Operating Systems Supported

Windows 98SE/ME/2000/XP/2003 Server/Vista/7, Linux

Mac OS9/OSX and Sun Microsystems

Power Supply DC 5V / 2A Adaptor

Dimension ( L x W x H ) 127 x 67 x 27 mm

Unit Weight 246 g 243 g

Housing material Metal

Operating Temperature 32~ 122°F (0~ 50°C )

Humidity 0%~80%RH

- 5 -

2 Installation

2.1 System Requirements

Console

1. VGA, SVGA, Multisync monitor capable of the highest resolution.

2. USB keyboard/mouse.

Computer

1. VGA, SVGA or multisync card.

2. Type A USB port or PS/2 6 pin mini-DIN for keyboard and mouse.

3. Operating systems: Windows 98/98SE/2000/ME/XP/2003/Vista/7, Mac OS9/OSX, Linux

Kernel 2.3 or later, Solaris 8 or later, Sun Micro OS.

Cables

1. CAT5/CAT5E/CAT6 cable to connect the remote and local unit, the supported maximum

length of this cable is 200 meters.

2. Custom combo 4-in-1 cable (accessories).

- 6 -

2.2 Physical Diagram

Transmitter

Front View

1 Reset switch

2 LED indicators

3 Push button

4 USB keyboard

5 USB mouse

Rear View

1 Cat5

2 Video to local monitor

3 Video/KB/MS to PC

4 Power jack

- 7 -

Receiver

Front View

1 Reset switch

2 LED indicators

3 USB keyboard

4 USB mouse

5 Video adjusted skews

Rear View

1 Cat5

2 Upgrade

3 Video to local monitor

4 Power jack

Reset Switch :

Press the Reset switch if you want to reset the system. This switch must be pushed

with a thin object like the end of a paper clip, or a ball point pen.

Firmware download connector

The min-USB female connector on the rear of the KVM switch is for a firmware

upgrade function. To update your KVM firmware, please contact your dealer.

- 8 -

Cable Connection Diagram

1 Monitor

2 PC

3 Video/KB/MS

USB mouse

USB keyboard

2.3 Hardware Installation

1. Switch off all devices.

2. Connect your monitor, USB keyboard/mouse to the local unit, if you want to control your

system at the local console.

3. Connect your monitor, USB keyboard/mouse to the remote unit, if you want to control your

system at the remote console.

4. Connect the remote and local unit by using a CAT5/CAT5E/CAT6 cable; the supported

maximum cable length is 200 meters.

5. Connect the 5V power supply to power on the local unit.

6. Connect the 5V power supply to power on the remote unit.

7. Connect video and/or USB keyboard/mouse of local unit and computer/KVM by using the

supplied cables.

8. Turn on your computer if it was turned off.

9. Adjust video quality by using brightness or focus skew if necessary.

- 9 -

3 Operations

3.1 Active Console Selection by Push Button

You can press the push button on the local unit to change the active console of operation. There

are three types of active console configurations:

1. Local Console Only

You can operate the system only from the local unit.

2. Remote Console Only

You can operate the system only from the remote unit.

3. Both Consoles

You can operate the system from both the local and remote unit.

The default configuration is “Both Consoles” mode. Once you change the active console

configuration, it will be saved and will not be affected by unit reset.

The active console can be shown via “Selected Indicators” of LED indicator, please refer the

description of next sections

3.2 LED Indicators

The LED indicators of the remote console are the same as the local ones, if both units are

connected successfully; or all LED indicators at remote console will turn OFF.

Selected Indicators (RED)

Both Selected:

Indicates that you can control your system from both the local and remote console.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Digitus Extenseur

Digitus

Digitus DN-95128-1 Manuel utilisateur

Digitus

Digitus DC-56100 Manuel utilisateur

Digitus

Digitus DS-51201 Manuel utilisateur

Digitus

Digitus DC-51101-LOCAL Manuel utilisateur

Digitus

Digitus DN-82040 Manuel utilisateur

Digitus

Digitus DS-55129 Manuel utilisateur

Digitus

Digitus DS-55302 Manuel utilisateur

Digitus

Digitus DN-95126 Manuel utilisateur

Digitus

Digitus DS-55508 Manuel utilisateur

Digitus

Digitus DS-55101 Manuel utilisateur

Digitus

Digitus DS-53200 Manuel utilisateur

Digitus

Digitus DA-70141 Manuel utilisateur

Digitus

Digitus DS-55501 Manuel utilisateur

Digitus

Digitus DS-55202 Manuel utilisateur

Digitus

Digitus DS-55316 Manuel utilisateur

Digitus

Digitus DS-55507 Manuel utilisateur

Digitus

Digitus DS-55522 Manuel utilisateur

Digitus

Digitus DN-70185 Manuel utilisateur

Digitus

Digitus DS-55519 Manuel utilisateur

Digitus

Digitus DS-55306 Manuel utilisateur

Digitus

Digitus DC-52101 Manuel utilisateur

Digitus

Digitus DS-55300 Manuel utilisateur

Digitus

Digitus DS-55400 Manuel utilisateur

Digitus

Digitus DS-55510 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur