Digitus HDBaseT DS-55523 Manuel utilisateur

HDMI HDBaseT™ 3.0

Extender Set, 100 m

Manual

DS-55523

Table of Contents

1. Introduction ............................................................................3

2. Main Features .........................................................................4

3. Package Contents ....................................................................4

4. Product Specification...............................................................5

5. Product Overview....................................................................7

5.1 Transmitter Unit ................................................................7

5.2 Receiver Unit .....................................................................9

6. Input & Output Switching ......................................................11

6.1 Audio Embedding and De-embedding ..............................13

6.2 USB Mode Applications....................................................14

6.3 IR Pin Definition...............................................................15

Thank you for purchasing this product

For optimum performance and safety, please read these instructions

carefully before connecting, operating or adjusting this product.

Please keep this manual for future reference

Surge protection device recommended

This product contains sensitive electrical components that may be

damaged by electrical spikes , surges , electric shock , lighting strikes,

etc. Use of surge protection systems is highly recommended in order

to protect and extend the life of your equipment

1. Introduction

The DIGITUS® HDMI HDBaseT™ 3.0 Extender Set enables

uncompressed AV signal transmission in 4K/60Hz, 4:4:4 at 18 GB/s

over a distance of 100 m via CAT 6A (or higher) cables. Both on the

transmitter and on the receiver, there are two USB-A "Device" ports

as well as a USB-B "Host" connection. This allows USB signals, e.g. for

KVM, USB data carriers etc., to be integrated on both ends and

connected to the processing PC on the respective opposite end. Both

devices can be switched between "Host" and "Device" mode using a

DIP switch. The system enables bidirectional transmission of PoC

(Power over Cable) and IR. Via RS232, both devices can be controlled

separately. Analog stereo audio decoupling is also available.

Another impressive feature is versatile eARC/ARC compatibility, which

enables the connection to new and older audio devices such as AVRs

(Audio Video Receiver). Two modes (ARC, S/PDIF) are available here,

which can also be toggled very easily using a changeover switch.

2. Main Features

1. HDBaseT™ 3.0 technology

2. HDMI 2.0b, HDCP 2.2

3. Uncompressed signal transmission in 4K/60Hz, 4:4:4 at 18 GB/s

4. Transmission distance of up to 100 m via CAT 6A (or higher) cables

5. 2x USB-A 2.0 connection on each unit for KVM function

(keyboard, mouse, webcam), connection of USB data

storage media, etc.

6. eARC/ARC function

7. PoC (Power over Cable) – Only the unit requires an

external power adapter

8. R232 signal transmission

9. 1x RJ45 (Gigabit Ethernet) network connection on each unit

10. 1x HDMI loop-out to the transmitter unit

3. Package Contents

•1x Transmitter unit

•

1x Receiver unit

•

1x IR transmission

cable (1.5 m)

•

1x IR receiver cable

(1.5 m)

•

1x Power adapter

(DC 24V/1A, 1.45 m)

•

2x 3-pin Phoenix

connector

•

1x Mounting

accessories

•1x User manual

4. Product Specification

1. HDBaseT™ 3.0 technology

2. Supports eARC/ARC function (the sound is returned to the

HDMI IN connection, HDMI OUT connection (only audio)

and SPDIF OUT connection of the transmitter)

3. Bi-directional IR transmission

4. Bi-directional PoC (Power over Cable) transmission (24V)

– Only the unit requires an external power adapter

5. Transmitter unit connections:

1x HDMI input (4K/60Hz) with eARC/ARC – Connection for

signal source, 1x HDMI output (loop out) – AV output for

local TV or only audio output

2x USB-A 2.0 for KVM function (keyboard, mouse, webcam),

connection of USB data storage media, etc.

1x USB-B input – Connection host PC for use of

KVM functionality

1x RJ45 output (HDBaseT™ 3.0) – Connection CAT

transmission cable

1x RJ45 (Gigabit Ethernet) network connection

1x RS232 (3-pin Phoenix) for RS232 command transmission

1x Toslink™ (S/PDIF) output

1x 3.5 mm audio (L/R, input/output)

1x IR input, 1x IR output

1x Power adapter input (DC 24V/1A),

screw connector – Connection for external power adapter

1x Micro USB input – Service/remote maintenance update

3x Changeover switch, 1x selection key

5x Status LED

6. Receiver unit connections:

1x HDMI output (eARC, ARC) – AV output for local TV with

eARC, ARC

1x RJ45 input (HDBaseT™ 3.0) – Connection CAT

transmission cable

2x USB-A 2.0 for KVM function (keyboard, mouse, webcam),

connection of USB data storage media, etc.

1x USB-B input – Connection host PC for use of

KVM functionality

1x RJ45 (Gigabit Ethernet) network connection

1x RS232 (3-pin Phoenix) for RS232 command transmission

1x Toslink™ (SPDIF) input

1x 3.5 mm audio (L/R, output)

1x IR input, 1x IR output

1x Micro USB input – Service/remote maintenance update

1x Power adapter input (DC 24V/1A),

screw connector – Connection for external power adapter

1x Changeover switch, 1x Selection key

5x Status LED

7. ESD protection

8. Suitable for wall mounting

9. Operating temperature: 0-40°C

10. Housing: Metal

11. Dimensions (1 unit): L 17 x W 10.2 x H 2.2 cm

12. Weight: Transmitter 425 g, receiver 437 g

13. Color: Black

5. Product Overview

5.1 Transmitter Unit

Name

Description

SELECT

button

Used for switching the ARC mode and

SPDIF mode

L/R IN/OUT

switch

Switch to left, the L/R IN/OUT port is the

audio embedding port.

Switch to right, the L/R IN/OUT port is

the audio de-embedding port.

LOOP OUT

/AUDIO ONLY

switch

Switch to left (LOOP OUT), the HDMI OUT

port is the loopout port for the HDMI IN

port

Switch to right (AUDIO ONLY), the HDMI

OUT port outputs 720P black screen

image, and the audio is from ARC or

SPDIF

HOST/DEVICE

USB switch

Switch to left(HOST), the USB HOST mode

is enabled

Switch to right(DEVICE), the USB DEVICE

mode is enabled

USB 2.0

Type B

USB extension host port connected to PC

SERVICE

Firmware update port

Status

indicator

Power LED, LINK LED, VIDEO LED, ARC LED,

SPDIF LED

USB 2.0

Type A

Two USB device ports, connected to

U disk, mouse or keyboard

6 HDMI IN

HDMI signal input port, connected to

signal source device ,supporting

EARC/ARC amplifier

7 HDMI OUT

HDMI signal loopout port It can choose to

be a LOOP OUT or AUDIO ONLY port

through the LOOP OUT/AUDIO ONLY

switch

8 L/R IN/OUT

Audio embedding/de-embedding port. It

can be used for audio embedding/

de-embedding through the L/R IN/OUT

switch

9 RS-232

RS-232 serial port, used for serial port

command transmission

10 Power supply

DC 24V/1A power supply input port.

Note that the extender supports POC

function, it means that either transmitter or

receiver is powered on by 24V/1A power

adapter, the other one doesn‘t need power

supply

LAN

1G Network port

HDBT OUT

10G Network port, connected to the

HDBT IN port of Receiver with a CAT 6A/7

cable. It is used for various signals

pass-through

SPDIF OUT

Optical output port

IR IN

IR signal input port, connected to IR

Receiver cable

IR OUT

IR signal output port, connected to IR

Blaster cable

5.2 Receiver Unit

Name

Description

SELECT

button

Used for switching the ARC mode and

SPDIF mode

HOST/DEVICE

USB switch

Switch to left(HOST), the USB HOST mode

is enabled

Switch to right(DEVICE), the USB DEVICE

mode is enabled

USB 2.0

Type B

USB extension host port connected to PC

SERVICE

Firmware update port

Status

indicator

Power LED, LINK LED, VIDEO LED, ARC LED,

SPDIF LED

USB 2.0

Type A

Two USB device ports, connected to

U disk, mouse or keyboard

6 HDMI OUT

HDMI signal loopout port It can choose to

be a LOOP OUT or AUDIO ONLY port

through the LOOP OUT/AUDIO ONLY

switch

7 L/R IN/OUT

Audio embedding/de-embedding port.

It can be used for audio embedding/

de-embedding through the L/R IN/OUT

switch

8 RS-232

RS-232 serial port, used for serial port

command transmission

9 Power supply

DC 24V/1A power supply input port.

Note that the extender supports POC

function, it means that either transmitter or

receiver is powered on by 24V/1A power

adapter, the other one doesn‘t need power

supply

LAN

1G Network port

HDBT OUT

10G Network port, connected to the

HDBT IN port of Receiver with a CAT 6A/7

cable. It is used for various signals

pass-through

SPDIF OUT

Optical output port

IR IN

IR signal input port, connected to IR

Receiver cable

IR OUT

IR signal output port, connected to IR

Blaster cable

Table des matières

Autres manuels Digitus Extenseur

Digitus

Digitus DS-55124 Manuel utilisateur

Digitus

Digitus DS-55204 Manuel utilisateur

Digitus

Digitus DS-54901 Manuel utilisateur

Digitus

Digitus DS-55100 Manuel utilisateur

Digitus

Digitus DS-55504 Manuel utilisateur

Digitus

Digitus DS-55516 Manuel utilisateur

Digitus

Digitus DS-55200 Manuel utilisateur

Digitus

Digitus DS-55101 Manuel utilisateur

Digitus

Digitus DN-82040 Manuel utilisateur

Digitus

Digitus DS-55321 Manuel utilisateur

Digitus

Digitus DS-55309 Manuel utilisateur

Digitus

Digitus DN-95123 Manuel utilisateur

Digitus

Digitus DS-55506 Manuel utilisateur

Digitus

Digitus DN-82040 Manuel utilisateur

Digitus

Digitus DC-52101 Manuel utilisateur

Digitus

Digitus DS-51201 Manuel utilisateur

Digitus

Digitus DS-55507 Manuel utilisateur

Digitus

Digitus DS-55202 Manuel utilisateur

Digitus

Digitus DS-55129 Manuel utilisateur

Digitus

Digitus DA-70141 Manuel utilisateur

Digitus

Digitus DS-55517 Manuel utilisateur

Digitus

Digitus DS-51200 Manuel utilisateur

Digitus

Digitus DC-53101 Manuel utilisateur

Digitus

Digitus DS-55316 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur