Digitus ESATA CARDBUS ADAPTER Manuel utilisateur

1

eSATA

CARDBUS ADAPTER

User Manual

2

Features and Benefits

Silicon Image SiI 3512 chipset

Compliant with Serial ATA Specifications rev. 1.0

PCMCIA CardBus Interface with Power Management

Provides two independent channels to support to two Serial ATA

drives

Support Serial ATA data transfer rates up to 150MB/sec

Breaks the 137GB barrier! Supports various brands of large

capacity Serial ATA hard disk drives

Supports Windows 7, Vista, XP, 2000

Bus Interface

32-bit PCMCIAType II

Connectors

2 x external eSATA connectors

System Requirements

Windows 7, Vista, XP, 2000

Available CardBus Type II Slot

3

Hardware Installation

General instructions for installing the card are provided below. Since

the design of system may vary, refer to your system’s reference manual

for further information, if needed.

1. Power off your notebook computer.

2. Insert the eSATA CardBus Adapter into the Type II PC Card slot

of your notebook computer. Make sure it is inserted all the way in

for a solid connection.

3. Power on your notebook computer.

Driver Installation

For Windows® 2000

1. At Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device(recommend)

then click Next.

3. Insert the driver CD, check CD-ROM drives, uncheck the other

boxes, click Next, then click Next again.

4. If the Digital Signature Not Found message appears, click Yes.

Our driver has been thoroughly tested for stability and

4

compatibility.

5. Click Finish.

For Windows® XP/Server 2003

1. At the Found New Hardware Wizard:

XP(w/SP1 or earlier)/Server 2003: continue to step #2

XP(w/SP2 or later)/Server 2003(w/SP1 or later): select No, not

this time, then click Next.

2. Insert the driver CD, select Install the software automatically

(Recommended), and click Next.

3. Click Finish.

For Windows® Vista

1. At Found New Hardware Wizard, select Locate and install

driver software (recommended).

2. Insert the driver CD, click Next.

3. If the system prompts the user informing the drivers are not

signed, select the option Install this driver software anyway.

4. Click Close to complete the installation.

5

To Verify Windows® Installation

1. Right click My Computer and click Manage.

2. Select Device Manager.

3. Double click SCSI and RAID Controller, then double click

Silicon Image SiI 3512 SATALink Controller to display driver

properties. A message this device is working properly is displayed

in the dialog box, the driver has been correctly installed.

Table des matières

Autres manuels Digitus Adaptateur

Digitus

Digitus DA-70837 Manuel utilisateur

Digitus

Digitus DN-95109 Manuel utilisateur

Digitus

Digitus DA-70200-1 Manuel utilisateur

Digitus

Digitus DA-70851 Manuel utilisateur

Digitus

Digitus DA-70839 Manuel utilisateur

Digitus

Digitus DA-70156 Manuel utilisateur

Digitus

Digitus Type-C DA-70166 Manuel utilisateur

Digitus

Digitus DN-70560 Manuel utilisateur

Digitus

Digitus DA-70148-4 Manuel utilisateur

Digitus

Digitus DA-10060 Manuel utilisateur

Digitus

Digitus DA-70148-3 Manuel utilisateur

Digitus

Digitus DN-70566 Manuel utilisateur

Digitus

Digitus DN-7003GS Manuel utilisateur

Digitus

Digitus DA-70840 Manuel utilisateur

Digitus

Digitus DA-70842 Manuel utilisateur

Digitus

Digitus DA-70850 Manuel utilisateur

Digitus

Digitus DN-15021 Manuel utilisateur

Digitus

Digitus DA-70844 Manuel utilisateur

Digitus

Digitus DA-70451 Manuel utilisateur

Digitus

Digitus USB 2.0 Manuel utilisateur

Digitus

Digitus DN-3023 Manuel utilisateur

Digitus

Digitus DA-10196 Manuel utilisateur

Digitus

Digitus DA-70843 Manuel utilisateur

Digitus

Digitus DA-70300 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur