Digitus DN-95109 Manuel utilisateur

Gigabit Ethernet PoE++

Injector, 802.3bt, 85 W

User Manual

DN-95109

Contents

1. Introduction ................................................................................. 2

2. Features ....................................................................................... 3

3. Hardware Description ................................................................... 4

4. Installation ................................................................................... 5

5. Troubleshooting ........................................................................... 5

6. Specifications ............................................................................... 7

Package content:

•Gigabit Ethernet PoE++ Injector, 802.3bt, 85 W

•Cable for non-heating appliances (safety plug / jack IEC 5)

•Quick reference guide

1. Introduction

The 802.3bt injector from DIGITUS® offers an 85 watt PoE port as a

midspan solution. Compact, cost-effective and fully IEEE802.3bt-

compliant. The simple solution for remote power supply of wireless

access points, IP security camera, VoIP phones, thin clients and other

installations with PoE functionality. PoE+/PoE++ compatible devices can

be supplied with power and data using the network cable, a secure and

reliable solution for expanding the existing network infrastructure. The

injector detects various PoE modes (A/B)- Plug & Play.

2. Features

Here are the features of 85W injector:

•Power over Ethernet Injector for 10/100/1000BaseT

•Full IEEE802.3at /bt compliant

•Automatically detects and protects PoE equipment from being

damaged by incorrect installation

•Internal AC/DC converter. No need for external power brick

•Overload and short circuit protection

•Mixes Ethernet and power into RJ-45 port

•Remote power feeding Delivers

•Power up to 100 meters

•Light weight and compact size

•Wall-Mountable design

•Easy Plug-and-Play installation

•Power over Ethernet output power of 56V@1.5A

3. Hardware Description

1. AC Power Input Connector:

This connector connects the AC power source to the PoE Injector.

2. Data IN:

This port is an RJ-45 Ethernet connector where data is received and

transmitted through the PoE Injector.

3. PoE OUT:

This port is an RJ-45 Ethernet connector where data is received and

transmitted through the PoE Injector and provides PoE power along

with the Ethernet data to a PoE device.

4. Alt A LED:

This LED indicates the pins 1/2/3/6 is providing power to the PoE OUT

port or not.

5. Alt B LED:

This LED indicates the pins 4/5/7/8 is providing power to the PoE OUT

port or not.

6. Ground Wire:

Please connect the ground wire

4. Installation

Before placing the Unit:

•Do not to cover PoE Injector or block the airflow to the PoE with any

foreign objects. Keep the PoE Injector away from excessive heat and

humidity and free from vibration and dust.

•Ensure that the cable length from Ethernet network source to the

terminal does not exceed 100 meters The PoE is not a repeater and

does not amplify the Ethernet data signal.

•Use a splitter if desired; ensure that the splitter is connected close to

the terminal and not on the PoE Injector.

•No "on-off" switch exists; simply plug the PoE Injector into an AC

power source.

Installing the Unit:

•Connect the PoE Injector to an AC outlet (100-40VAC), using a

standard power cord.

•Connect the Data IN jack (input) to the remote Ethernet network

switch’s Patch panel and the PoE OUT jack (output) to the terminal.

5. Troubleshooting

PoE Injector dos not power up:

•Verify that a reliable power cord is used.

•Verify that the voltage at the power inlet is between

100 and 240 VAC.

•Remove and re-apply power to the device and check the indicators

during power up sequence

The PD does not operate:

•Verify that the PoE Injector detects a PD.

•Verify that the PD is designed for PoE operation.

•Verify that you are using a standard Category 5/5e/6,

straight-wired cable, with four pairs.

•If an external power splitter is in use,

replace it with a known-good splitter.

•Ensure input Ethernet cable is connected to the DATA IN port.

•Verify that the PD is connected to the Data & Power port.

•Try to reconnect the same PD into a different PoE Injector.

If it works, there is probably a faulty port or RJ45 connection.

•Verify that there is no short over any of the twisted pair cables or

over the RJ45 connectors.

The end device operates, but there is no data link:

•Verify that the port indicator on the front panel is continuously lit.

•If an external power splitter is in use,

replace it with a known-good splitter.

•Verify that for this link, you are using standard UTP/FTP Category 5

straight (non-crossover) cabling, with all four pairs.

•Verify that the Ethernet cable length is less than 100 meters from the

Ethernet source to the load/remote terminal.

•Try to reconnect the same PD into a different PoE Injector If it works,

there is probably a faulty port or RJ45 connection

6. Specifications

Description

Interfaces

1 x RJ-45 Connector for Data

1 x RJ-45 Connector for PoE out + Data

Indicators

PoE: Alt A, Alt B

Standard

IEEE802.3af, IEEE802.3at, IEEE802.3bt

Power Method

100-240VAC, 50/60Hz

Output Voltage

56VDC

Power Supply

90W

PoE Budget

85W

Output PoE Pin Assignment

Alternative A:

V+ (RJ45 Pin3,6), V- (RJ45 Pin 1,2)

Alternative B:

V+ (RJ45 Pin4,5), V- (RJ45 Pin 7,8)

Dimensions

180 x 65 x 40 mm

Weight

0.6KG

Operating Temperature

0 to 40°C

Storage Temperature

-10 to 70°C

Operating Humidity

5 to 95% Noncondensing

Pack list

PoE Injector

1 pcs

User Manual

1 pcs

This is a Class A product. In home environment, this product may cause radio interference. In this

case, the user may be required to take appropriate measures.

Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the

shipping content. If the Declaration of Conformity is missing, you can request it by post under the

below mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Table des matières

Autres manuels Digitus Adaptateur

Digitus

Digitus DA-70844 Manuel utilisateur

Digitus

Digitus DA-70840 Manuel utilisateur

Digitus

Digitus DA-70250-1 Manuel utilisateur

Digitus

Digitus DN-70542 Manuel utilisateur

Digitus

Digitus DN-3024 Manuel utilisateur

Digitus

Digitus DN-3023 Manuel utilisateur

Digitus

Digitus DA-70842 Manuel utilisateur

Digitus

Digitus DN-70230 Manuel utilisateur

Digitus

Digitus DA-70148-2 Manuel utilisateur

Digitus

Digitus DN-10180 Manuel utilisateur

Digitus

Digitus Wireless 150N PCI Adapter Manuel utilisateur

Digitus

Digitus DN-3025 Manuel utilisateur

Digitus

Digitus DA-70839 Manuel utilisateur

Digitus

Digitus DA-70831 Manuel utilisateur

Digitus

Digitus DA-70837 Manuel utilisateur

Digitus

Digitus DS-45331 Manuel utilisateur

Digitus

Digitus DA-70452 Manuel utilisateur

Digitus

Digitus DA-70156 Manuel utilisateur

Digitus

Digitus WNP-UA300-01 Manuel utilisateur

Digitus

Digitus DN-7044-1 Manuel utilisateur

Digitus

Digitus DA-70843 Manuel utilisateur

Digitus

Digitus DN-70566-1 Manuel utilisateur

Digitus

Digitus DA-70854 Manuel utilisateur

Digitus

Digitus DA-70148-4 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur