Digitus DN-70550 Manuel utilisateur

WIRELESS 300N

DUAL BAND USB 2.0 ADAPTER

Quick Installation Guide

DN-70550

Table of Contents

Package Contents.............................................................................. Page 1

Network Card Installation.................................................................. Page 2

Connect to Wireless Access Point................................................... Page 5

Package Contents

Before you starting to use this wireless network card, please check if there’s anything missing in the

package, and contact your dealer of purchase to claim for missing items:

USB Wireless Network Card (1 pcs) 1

Protection Cap (1 pcs) 2

Driver/Utility/User Manual CD-ROM (1 pcs) 3

Network Card Installation

Please follow the following instructions to install your new USB wireless network card.

1. Insert the USB wireless network card into

an empty USB 2.0 port of your computer

when computer is switched on.

Never use force to insert the card, if you

feel it’s stuck, flip the card over and try

again.

2. The following message will appear on

your computer, click ‘Cancel’.

3. Insert device driver CDROM into the

CD/DVD ROM drive of your computer, and

execute ‘Setup.exe’ program. Please read

the end user license agreement and click ‘I

accept the terms of the license agreement’

and ‘Next’ to accept license agreement.

4. It is recommend installing driver and

utility if the network card is installing the first

time. If you want to update the driver only,

choose ’Install driver only’. Click ‘Next’ to

continue.

5. You can choose the configuration tool

used to configure the wireless network card

here. It’s recommended to select ‘Ralink

Configuration Tool’, which provides fully

access to all functions of this wireless

network card. If you prefer to use the

wireless configuration tool provided by

Windows XP, Vista or 7, please select

‘Microsoft Zero Configuration Tool’ then

click ‘Next’.

6. Now you’ll see the following message,

please click ‘Install’ to begin the installation.

If you see ‘Found New Hardware’

message again, please ignore it and

wait.

7. Please wait while the install procedure is

running. When you see this message,

please click ‘Finish’ to complete the

installation process.

Connect to Wireless Access Point

Using Configuration Utility to Connect to Wireless Access Point:

1. After installation is complete,

wireless configuration utility will be

shown in the desktop of your computer

automatically. You will also see an icon

at the lower-right corner of your

windows system. You can click the icon

by right mouse key, and select the

configuration utility you want to use or

switch the network card to AP mode.

2. Configuration utility will scan for

wireless access points and access to

any unencrypted wireless access point

automatically. If you wish to connect to

another access point, select the

access point and click ‘Connect’.

If the wireless access point you want to

connect does not show here, please

click ‘Rescan’.

NOTE: In Vista, the network card will

not connect to any unencrypted

wireless access point automatically.

3. If the wireless access point uses

encryption, you have to input WEP key

or WPA preshared key. Please ask the

owner of the wireless access point you

want to connect and input the correct

key here, and then click ‘OK’. If the

value you inputted here is wrong, you

will not be able to connect to wireless

access point.

4. If the wireless access point is

successfully connected, you’ll see a

symbol appears in front of the name of

wireless device.

For advanced settings and other features of this USB wireless network card, please refer to user manual

enclosed in supplied CD-ROM.

Table des matières

Autres manuels Digitus Adaptateur

Digitus

Digitus DA-70852 Manuel utilisateur

Digitus

Digitus DA-70843 Manuel utilisateur

Digitus

Digitus DA-71101 Manuel utilisateur

Digitus

Digitus DA-70250-1 Manuel utilisateur

Digitus

Digitus DN-95108 Manuel utilisateur

Digitus

Digitus DN-70560 Manuel utilisateur

Digitus

Digitus DA-70838 Manuel utilisateur

Digitus

Digitus DN-30211 Manuel utilisateur

Digitus

Digitus DN-70543 Manuel utilisateur

Digitus

Digitus DN-10180 Manuel utilisateur

Digitus

Digitus DA-70830 Manuel utilisateur

Digitus

Digitus DA-70148-4 Manuel utilisateur

Digitus

Digitus DN-7042-1 Manuel utilisateur

Digitus

Digitus DA-70451 Manuel utilisateur

Digitus

Digitus DA-70841 Manuel utilisateur

Digitus

Digitus DA-70833 Manuel utilisateur

Digitus

Digitus DA-10070 Manuel utilisateur

Digitus

Digitus WIRELESS 300N AUTO INSTALLATION USB ADAPTER Manuel utilisateur

Digitus

Digitus Type-C DA-70166 Manuel utilisateur

Digitus

Digitus DA-70878 Manuel utilisateur

Digitus

Digitus DA-10196 Manuel utilisateur

Digitus

Digitus DN-95132 Manuel utilisateur

Digitus

Digitus DA-70837 Manuel utilisateur

Digitus

Digitus DA-70300-1 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur