Digitus DN-10190 Manuel utilisateur

Dual-Port 40G QSFP

Adapter

Quick Installation Guide

DN-10190

Table of Contents

1. Introduction ..................................................................... 2

2. Package Contents ............................................................. 3

3. Specification ..................................................................... 3

4. System Requirements ...................................................... 4

5. Hardware Installation....................................................... 5

6. Install Drivers and Software ............................................. 5

1. Introduction

The DN-10190 Dual-Port 40G QSFP adapter with PCI Express 3.0 and

x8 Mellanox Connectx-3 technic delivers high-bandwidth and

industry-leading Ethernet connectivity and is compliant with PCIe2.0

and 1.1. It features two 40 Gigabit QSFP+ Ethernet ports compliant

with QSFP+ MSA Spec Rev 1.0, and two QSFP ports supporting FDR-

14 InfiniBand or 40Gb Ethernet, with support for InfiniBand FDR

speeds of up to 56Gbps (auto-negotiation FDR-10, DDR and SDR).

The low-profile form factor adapter with 2u bracket supports virtual

protocol interconnect (VPI), InfiniBand Architecture specification

v1.2.1, IEEE Std. 802.3, copper cables and optical cables with the use

of QSFP connectors, and SFP+ cables available through QSA (Quad to

Serial). It enables low latency RDMA over 40Gb Ethernet, with legacy

and UEFI PXE network boot support, and supports iSCSI as a software

iSCSI initiator in NIC mode with NIC driver. The adapter supports

multiple operating systems, such as FreeBSD, Linux 5.x and above,

VMware, Windows server2008/2012/2016/2019, win7/ win8/

win8.1/ win10 32 or 64bit. It also supports CORE-Direct○,R

application off-load, GPUDirect application off-load, RDMA over

converged Ethernet (RoCE), end-to-end QoS and congestion control,

TCP/UDP/IP stateless off-load, Ethernet encapsulation (EoIB), SR-IOV

support (16 virtual functions supported by KVM and Hyper-V(OS

dependant) up to a maximum 127 virtual functions supported by the

adapter), and traffic steering across multiple cores, making it a

versatile adapter suitable for a wide range of applications.

2. Package Contents

•1x Dual-Port 40G QSFP adapter

•1x User’s Manual

•1x CD Driver

•1x Low profile bracket

3. Specification

•PCI-Express host interface specification v3.0 x8 and Complete

with PCIe2.0 and 1.1

•Two 40 Gigabit QSFP+ Ethernet ports

•Compliant with QSFP+ MSA Spec Rev 1.0

•Two QSFP ports supporting FDR-14 InfiniBand or 40Gb Ethernet.

•Support for InfiniBand FDR speeds of up to 56Gbps (auto-

negotiation FDR-10, DDR and SDR)

•Low-profile form factor adapter with 2u bracket

•Virtual protocol interconnect (VPI)

•InfiniBand Architecture specification v1.2.1 compliant

•IEEE Std. 802.3 compliant

•Compliant with copper cables and optical cables with the use of

QSFP connectors.

•Support for SFP+ cables available through QSA (Quad to Serial)

•CORE-Direct○, R application off-load.

•GPU Direct application off-load.

•RDMA over converged Ethernet (RoCE)

•End-to-End QoS and congestion control

•TCP/UDP/IP stateless off-load.

•Ethernet encapsulation (EoIB)

•SR-IOV support;16 virtual functions supported by KVM and

Hyper-V (OS dependant) up to a maximum 127 virtual functions

supports by the adapter.

•Enables low latency RDMA over 40GbEthernet (supported with

both non-virtualized and SR-IOV enable virtualized servers)—

latency as low as 1us.

•Traffic steering across multiple cores

•Microsoft VMQ/VMware Net Queue support

•Industry-leading throughput and latency performance

•Legacy and UEFI PXE network boot support

•Supports iSCSI as a software iSCSI initiator in NIC mode

with NIC driver.

•Supports Operation Systems: FreeBSD, Linux5.x and above,

VMware, Windows server2008/2012/2016/2019,

win7/win8/win8.1/win10 32 or 64 bit.

4. System Requirements

•FreeBSD, Linux, VMWare ESXi

•Win-server2008 R2/ Win-server2012 R2/ Win-server2016/

Win-server2019

•Windows: 7/8/8.1/10 32/64bit

•One available PCI Express x8/x16 slot

5. Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe x4/x8/X16 slot.

4. To install the card, carefully align the card’s bus connector with

the selected PCIe slot on the motherboard. Push the board down

firmly.

5. Replace the slot bracket’s holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

6. Install Drivers and Software

Windows Operating Systems

You must have administrative rights to the operating system to

install the drivers.

1. insert the CD driver bound with Mellanox network driver into

your CD-ROM drive.

2. if the Found New Hardware Wizard screen is displayed,

click Cancel.

3. select a driver based on the system type:

for Windows Server type: (Assume that D):

“D:\NIC Drivers\Mellanox\ConnectionX-3\Windows Server”

for Windows type: (Assume that D):

“D:\NIC Drivers\Mellanox\ConnectionX-3\Windows Client”

4. Double click the driver corresponding to the system.

5. Follow the instructions in the install wizard to finish it.

Installing Linux Drivers from Source Code

1. Download and expand the base driver tar file.

2. Compile the driver module.

3. Install the module using the mod probe command.

4. Assign an IP address using the ipconfig command.

Function

controller

MELLANOX ConnectX-3

Fibre Media

10Gbase-cx4, 10Gbase-R,

and 1000Base-R, 40Gbase-R4

Fiber type

10Gbase-cx4, 10Gbase-R,

and 1000Base-R, 40Gbase-R4

Connect type

PCIE3.0 X8

Operation Systems

Windows8.1

Windows10

（

1909,1809,1607

）

Windows Server2003/2003 R2

Windows Server2008/2008 R2

Windows Server2012/R2

Windows Server2016/R2

Ubuntu 14.04 or later

Sles12 sp2 or later

REHL/CentOS7.2 or later

Oracle Linux 7.8 or later

KYLIN 10

Fedora 32

Debian 9.11/9.13/10.5/10.8

BCLINUX7.5 OR later

Stable kernel version 3.x,4.x or later

VMware ESX/ESXi 5.X,6.X or later

Port type Dual- Port 40G QSFP28 connecter

Each Port transmit

speed

1/10/40Gbps

Ethernet power

management

yes

standards

IEEE 802.3ae 10 GbE

IEEE 802.3ba 40 GbE (all three FDR

adapters)

IEEE 802.3ad Link Aggregation

IEEE 802.3az Energy Efficient

Ethernet

IEEE 802.1Q, .1P VLAN tags and

priority

IEEE 802.1Qbg

IEEE P802.1Qaz D0.2 Enhanced

Transmission Selection (ETS)

IEEE P802.1Qbb D1.0 Priority-based

Flow Control

IEEE 1588v2 Precision Clock

Synchronization

PXE/UEFI support

YES

ISCSI support

yes

VMDs, SR-IOV support

yes

TCP/IP Sec offload

YES

IPv4, IPv6 Support

yes

Jumbo frame size

9.6KB

Network I/O

Virtualization

VXLAN, Geneve, NVGRE, ISER, SR-IOV

Operation temperature

~55

C (32

F or 131

Storage temperature

-40~ 70

C (-40

F or 158

Relative humidity

20~80 non-condensing relative

humidity

MAX Power

10.13W

Hereby ASSMANN Electronic GmbH declares that the Declaration of

Conformity is part of the shipping content. If the Declaration of

Conformity is missing, you can request it by post under the below

mentioned manufacturer address.

www.assmann.com

Assmann

Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Digitus Adaptateur

Digitus

Digitus DA-70453 Manuel utilisateur

Digitus

Digitus DA-70841 Manuel utilisateur

Digitus

Digitus DN-10150-1 Manuel utilisateur

Digitus

Digitus DA-70300-1 Manuel utilisateur

Digitus

Digitus DN-7003GS Manuel utilisateur

Digitus

Digitus DA-70842 Manuel utilisateur

Digitus

Digitus DA-70202 Manuel utilisateur

Digitus

Digitus DA-70840 Manuel utilisateur

Digitus

Digitus DA-70837 Manuel utilisateur

Digitus

Digitus DN-70230 Manuel utilisateur

Digitus

Digitus DA-70451 Manuel utilisateur

Digitus

Digitus DS-45332 Manuel utilisateur

Digitus

Digitus DN-70543 Manuel utilisateur

Digitus

Digitus DN-7053 Manuel utilisateur

Digitus

Digitus DA-10196 Manuel utilisateur

Digitus

Digitus USB 2.0 Manuel utilisateur

Digitus

Digitus DN-70440-1 Manuel utilisateur

Digitus

Digitus DA-70833 Manuel utilisateur

Digitus

Digitus DA-70839 Manuel utilisateur

Digitus

Digitus DA-71101 Manuel utilisateur

Digitus

Digitus DA-70452 Manuel utilisateur

Digitus

Digitus DN-7056 Manuel utilisateur

Digitus

Digitus DA-70878 Manuel utilisateur

Digitus

Digitus eSATA CARDBUS ADAPTER Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur