Digilent Orbit BoosterPack Basic Demo Manuel utilisateur

1300 Henley Court

Pullman, WA 99163

509.334.6306

Orbit BoosterPack™ Basic Demo User Guide

Revised April 1, 2014

Doc: 6032-502-000-2 Page: 1 of 2

Other Product and company names mentioned herein are trademarks or trade

names of their respective companies.

© 2013 - 2014 Digilent Inc. All rights reserved.

Overview

The Orbit BoosterPack Basic Demo

is a simple program that shows the

functionality of some features on the

board.

Tools Needed to Run the Demo:

• LM Flash Programmer™

• Stellaris® ICDI drivers

• Stellaris® LaunchPad

• ORBIT BoosterPack™

Tools Needed to Alter the Demo:

• Code Composer Studio™ IDE

v5

Functional Description

The demo project continuously reads the state of the switches, buttons, and potentiometer (labeled

“VR1”) on the Orbit board. The switches and buttons control the four on-board user LEDs. The on-

board OLED displays both a Digilent banner, and the contents of the conversion register from the

analog-to-digital converter (ADC) that is connected to the potentiometer.

Turning on a switch, or pressing down a button will turn on the corresponding LED on the Orbit

board.

The value of the ADC is continuously updated on the OLED display. Rotating the black wheel of

the potentiometer counter clockwise, or clockwise, will change the value displayed. The value is

represented in hexadecimal form.

Orbit BoosterPack™ Basic Demo User Guide

Doc: 6032-502-000-2 Page: 2 of 2

Other Product and company names mentioned herein are trademarks or trade

names of their respective companies.

© 2013 - 2014 Digilent Inc. All rights reserved.

Programming the Stellaris® LaunchPad

Please download the Stellaris® ICDI drivers and the Stellaris® Flash Programmer available at

www.ti.com. For assistance installing the drivers, please see the “Stellaris Driver Installation Guide”

available at www.ti.com.

Follow these steps to program the Stellaris® LaunchPad with the Orbit BoosterPack demo project.

• Set the “PWR SELECT” switch on the Stellaris® LaunchPad to “DEBUG”

• Connect the Stellaris® LaunchPad to the host computer with a USB Type A to Micro B

cable. Connect the Micro B plug to the Micro-B receptacle labeled “DEBUG” on the Stellaris®

LaunchPad

• Open LM Flash Programmer

• 

• 



“OrbitDemo.bin”.

• Click the “Program” button.

Running the Demo

In order to run the demo, switch the Micro B plug to the Micro B receptacle labeled “DEVICE” on the

Stellaris® LaunchPad, and turn the “PWR SELECT” switch to “DEVICE”.

Note: For more information on the Orbit BoosterPack, see the Orbit BoosterPack Reference

Manual at: www.digilentinc.com. For a detailed description of the Stellaris® LaunchPad, or for more

information on the Stellaris® Peripheral Library, please refer to the user manual available at www.

ti.com. The demo project uses a ported version of the Digilent PmodOLED™ software library. For

more information on the PmodOLED software library, see the User Guide available with the library

download at: www.digilentinc.com.

Table des matières

Autres manuels Digilent Carte mère

Digilent

Digilent D2-SB Manuel utilisateur

Digilent

Digilent Genesys ZU Manuel utilisateur

Digilent

Digilent Cerebot MC7 Manuel utilisateur

Digilent

Digilent Genesys Manuel utilisateur

Digilent

Digilent Nexys4 DDR Manuel utilisateur

Digilent

Digilent 6002-410-021 Manuel utilisateur

Digilent

Digilent Arty S7 Manuel utilisateur

Digilent

Digilent Zybo Z7-10 Manuel utilisateur

Digilent

Digilent ZYBO Manuel utilisateur

Digilent

Digilent Digilab XC95 Manuel utilisateur

Digilent

Digilent Eclypse Z7 Guide rapide de l'utilisateur

Digilent

Digilent Cmod S6 Manuel utilisateur

Digilent

Digilent chipKIT Pro MX7 Manuel utilisateur

Digilent

Digilent chipKIT DP32 Manuel utilisateur

Digilent

Digilent Cerebot 32MX7 Manuel utilisateur

Digilent

Digilent Basys MX3 Manuel utilisateur

Digilent

Digilent Cora Z7 Manuel utilisateur

Digilent

Digilent Cerebot MC7 Manuel utilisateur

Digilent

Digilent PLTW S7 Manuel utilisateur

Digilent

Digilent chipKIT uC32 Manuel utilisateur

Digilent

Digilent Arty Z7 Manuel utilisateur

Digilent

Digilent Nexys2 Manuel utilisateur

Digilent

Digilent Nexys 3 Manuel utilisateur

Digilent

Digilent Genesys 2 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur