Digi TransPort WR11 Manuel utilisateur

Digi TransPort® Routers

Models WR11, WR21, WR31, WR41, WR44, WR44 R,

WR44 RR

User Guide

Revision history—90001019

Revision Date Description

N January 2016 nUpdated TransPort WR31 serial pinout diagram.

nUpdated Dynamic DNS content.

P June 2017 nAdded TransPort WR44 R and WR44 RR models.

nAdded RED (Radio Equipment Directive).

nAdded configuration parameters for Wi-Fi roaming

in client mode.

R May 2018 Updated content for the Digi TransPort version 6.1.x.

nAdded support for IPv6.

nUpdated content for configuring supported cellular

modules.

nAdded instructions for enabling health reporting via

Digi Remote Manager.

nAdded descriptions for backup and restore settings.

nMiscellaneous editorial corrections.

S July 2018 Updated content for the Digi TransPort version 6.1.x.

nAdded support for Cellular GPS to the WR31.

T September 2018 Updated content for the Digi TransPort version 6.1.x.

nAdded support for automatic APN selection.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United

States and other countries worldwide. All other trademarks mentioned in this document are the

property of their respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a

commitment on the part of Digi International. Digi provides this document “as is,” without warranty of

any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or

merchantability for a particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Warranty

To view product warranty information, go to the following website:

Digi TransPort® Routers User Guide 2

www.digi.com/howtobuy/terms

Customer support

Gather support information: Before contacting Digi technical support for help, gather the following

information:

Product name and model

Product serial number (s)

Firmware version

Operating system/browser (if applicable)

Logs (from time of reported issue)

Trace (if possible)

Description of issue

Steps to reproduce

Contact Digi technical support: Digi offers multiple technical support plans and service packages.

Feedback

To provide feedback on this document, email your comments to

techcomm@digi.com

Include the document title and part number (Digi TransPort® Routers User Guide, 90001019 T) in the

subject line of your email.

Digi TransPort® Routers User Guide 3

Contents

Digi TransPort® routers

TransPort WR11 15

TransPort WR21 17

TransPort WR31 18

TransPort WR41 20

TransPort WR44 / WR44 R 21

TransPort WR44 RR 22

Hardware features

TransPort WR11 hardware features 24

TransPort WR11 EVDO model 24

TransPort WR11 HSPA+ model 25

TransPort WR11 LTE-MIMO 26

TransPort WR11 XT 27

TransPort WR11 accessories 29

TransPort WR11 hardware specifications 30

Regulatory and safety statements 31

TransPort WR21 hardware features 35

TransPort WR21 front panel 35

TransPort WR21 rear panel features 36

Reset the TransPort WR21 37

TransPort WR21 serial pinout 38

TransPort WR21 accessories 40

TransPort WR21 hardware specifications 41

Regulatory and safety statements 41

TransPort WR31 hardware features 45

TransPort WR31 hardware specifications 48

TransPort WR31 accessories 49

TransPort WR31 mounting options 50

Hazardous Location installation 51

TransPort WR31 serial pinout 52

TransPort WR31 digital and analog inputs and outputs 54

I/O connector pin assignments 54

TransPort WR31 digital input/output: representative circuit 55

TransPort WR31 analog input: representative circuit 55

Example digital and analog I/O wiring 56

Digital output 56

Digital and analog I/O specifications 58

Regulatory and safety statements 60

Digi TransPort® Routers User Guide 4

Digi TransPort® Routers User Guide 5

TransPort WR41 hardware features 64

Front panel 64

Rear panel 65

Underside of unit features 66

Additional hardware features 67

TransPort WR41 hardware specifications 69

TransPort WR41 accessories 70

TransPort WR41 serial pinout 71

Regulatory and safety statements 72

TransPort WR44 / WR44 R hardware features 76

Front panel 76

TransPort WR44 models with cellular interface 76

TransPort WR44 models without SIM card slots 76

Rear panel 77

Underside of unit 78

Enclosure features 79

TransPort WR44 additional hardware features 80

TransPort WR44 hardware specifications 82

TransPort WR44 R hardware specifications 83

TransPort WR44 accessories 84

TransPort WR44 R accessories 85

TransPort WR44 / WR44 R RS232 serial pinout 86

Regulatory and safety statements 87

TransPort WR44 RR hardware features 91

Front panel 91

Rear panel 91

Enclosure features 92

TransPort WR44 RR hardware specifications 93

TransPort WR44 RR accessories 94

TransPort WR44 RR Ethernet cable connectors and pinouts 95

Regulatory and safety statements 97

Purchase additional serial cables 101

Signal strength indicators 102

Antenna specifications for Wi-Fi 2.4 GHz modules 103

Using the web interface

Log out and return to the login page 107

Execute a command from the web interface 108

Signal strength indicators on the Mobile status page 109

Use the web interface wizards 110

Use the Quick Start wizard 111

Use the Serial Interface wizard 112

Use the Create an aggressive mode LAN to LAN IPsec tunnel wizard 113

Use the SureLink wizard 114

Use the GOBI Module Carrier wizard 116

Use the Dual SIM wizard 117

Using the command-line interface

About the Digi TransPort command line interface 119

Supported command types 120

Required software for using the command line 121

Digi TransPort® Routers User Guide 6

Connect to the TransPort router from a PC 122

Exit the command line interface 124

Commands and the active port 125

When commands take effect 126

View current configuration changes 127

Save changes 128

Configure network settings 129

Establish a remote connection 131

Application commands 132

Application commands are case-insensitive 132

One command per line 132

Application command syntax 132

Use wildcards in commands 132

Use special usernames in commands 133

Using the command-line parameter tables in this guide 134

Activate and deactivate interfaces 136

ana command: Clear the Analyser Trace 137

config command: show/save configuration 138

config changes command: show number of changes counter 139

clear command: Clear the event log 140

gpio command: General Purpose Input Output (GPIO) 141

ping command: Troubleshoot connectivity problems 143

qdl command: Select cellular image to load 144

reboot command: reboot router 145

tcpperm command: establish a permanent serial to IP connection 146

tcpdial command: Establish a manually initiated serial to IP connection 148

tcpdab command: Cancel a tcpdial connection 149

templog command: monitor router temperature 150

traceroute command: Troubleshoot connectivity problems 151

AT commands 152

The AT command interface 152

Enter multiple commands 152

Use escape sequences 152

AT command result codes 153

S registers 154

atd: Dial a call 155

ath: Hang-up 156

atz: Reset 157

at&c: Control the DCD signal 158

at&f: Load factory settings 159

at&r: Control the CTS signal 160

at&v: View profiles 161

at&w: Write SREGS.DAT file 162

at&y: Select power-up profile 163

at&z: Store phone number 164

at\at: Ignore invalid AT commands 165

at\gps command:Send GPS data to ASY port 165

at\ls: Lock speed 166

at\port: Set the active port for text commands 167

at\smib commands 168

S register definitions 174

Digi TransPort® Routers User Guide 7

Configuring network interfaces

Configure Ethernet interfaces 179

IPv6 addressing support on Ethernet interfaces 179

Configure basic Ethernet IP address parameters 180

Configure advanced Ethernet parameters 182

Configure Ethernet Quality of Service (QoS) parameters 192

Configure Ethernet Virtual Router Redundancy Protocol (VRRP) 195

Configure logical Ethernet interfaces 199

Configure which Ethernet devices can send packets to the router (MACfiltering) 200

Configure an Ethernet bridge between two networks (MAC bridging) 202

Configure Rapid Spanning Tree Protocol (RSTP) 204

Configure Virtual LAN (VLAN) support 206

Configure Wi-Fi interfaces 208

Configure global Wi-Fi settings 209

Configure advanced global Wi-Fi settings 213

Configure a Wi-Fi node as a hotspot 214

Configure Wi-Fi filtering 215

Configure a Wi-Fi node 216

Perform a rogue scan 222

Configure mobile (cellular) interfaces 223

Configuration parameters required from your mobile network 223

Supported cellular modules in Digi TransPort products 224

Configure SIMs 225

Configure mobile connection settings 226

Configure SIMfailover 231

Configure advanced mobile parameters 232

Configure sending and receiving SMS messages 242

Verify mobile connectivity and check mobile status 246

Automatic SIMdetection 248

Determine the cellular module type and carrier firmware version 249

Switch the cellular carrier firmware 250

Update carrier firmware 254

Configure DSL interfaces 257

Configure permanent virtual circuit (PVC) parameters 258

Configure DSL network settings 259

Configure PVC traffic shaping parameters 263

Configure advanced DSL parameters 265

ConfigureGeneric Routing Encapsulation (GRE)interfaces 267

Configure GRE tunnel parameters 268

Configure advanced GRE parameters 271

Configure ISDN interfaces 273

Configure the ISDN interface to receive incoming calls 274

Configure ISDN dialing parameters 279

Configure advanced ISDN parameters 284

Configure ISDNLink Access Protocol D (LAPD) parameters 288

Configure ISDNto answer V.120 calls 291

Configure PSTN interfaces 293

Configure advanced PSTN parameters 298

Configure DialServ interfaces 302

Configure DialServ network settings 303

Configure advanced DialServ parameters 307

Configure serial interfaces 311

Configure advanced serial port parameters 314

Configure synchronous communications 318

Digi TransPort® Routers User Guide 8

Configure rate adaptation 320

Configure command alias mappings 322

Configure protocol bindings 324

Configure virtual serial ports 326

Configure port redirection using RealPort 328

Configure sending serial data to multiple serial ports 332

Configure IPv6 addressing support 335

IPv6 support is for Ethernet interfaces only 335

IPv6 modes 335

Typical IPv6 configuration 335

IPv6 support in the web interface 337

IPv6 support in the command-line interface 339

Configure a WAN for IPv6 343

Configure a LAN for IPv6 344

Show and update the IPv6 source IP address policy table 347

Show DHCPv6 server status 348

Show DHCPv6 client status 349

Use DHCPv6 to learn IPv6 addresses 350

Use the Neighbor Discovery Protocol (NDP) cache 351

Delete a Neighbor Discovery Protocol (NDP) cache 352

Show the IPv6 routing table 353

Show IPv6 routing and address information 354

Show the IPv6 addresses assigned to an interface 355

Support for IPv6 packets in firewall rules 356

Configure PPP and external modems 357

Configure external modem support 358

Configure PPP mappings 360

Configure PPP parameters 364

Configure mobile PPP parameters 373

Configure advanced PPP parameters 374

Configure PPP negotiation 386

Configure PPP sub-configurations 393

Configure PPP over Ethernet 395

Configuring DHCP servers

About DHCP servers 397

Configure DHCP server for Ethernet interfaces 398

Configure advanced DHCP parameters 401

Configure advanced DHCP options 402

Configure DHCP options 404

Configure static lease reservations 406

Configuring network services

Configure network services 409

Configuring DNS

Configure DNS servers 415

DNS Server n parameters 415

DNS Server Update parameters 416

Configure Dynamic DNS (DynDNS) 420

Digi TransPort® Routers User Guide 9

Dynamic DNS parameters 420

Advanced Dynamic DNS parameters 423

Configuring IP routing and forwarding

Supported routes 426

Dynamic routes 426

Static routes 426

Default routes 426

Routing modes 426

View the TransPort routing table 428

Configure route metrics 429

Configure IP routing parameters 430

Configure static routes 433

Advanced Static Route parameters 434

Related CLI commands 437

Configure default IP routes 441

Advanced Default route parameters 442

Configure Routing Information Protocol (RIP) settings 447

Configure global RIP Settings 447

Configure access lists 448

Configure authentication keys 449

Configure RIP advertisements 450

Configure Open Shortest Path First (OSPF) parameters 453

Configure Border Gateway Protocol (BGP) settings 456

Configure IP port forwarding and static NAT mappings 458

Configure multicast routes 460

Configure Virtual Routing and Forwarding (VRF) 462

VRF-Lite (Multi-VRF) 462

Information model objects (IMOs) 462

Virtual Routing Forwarding (VRF) entity 462

Equivalent routing entry 463

Virtual routing entry 463

Multi protocol BGP entity 464

Equivalent Cross Virtual Routing Entry 464

Cross virtual routing entry 465

Process for configuring VRFs 465

Support for Virtual Routing and Forwarding in the web and command-line interfaces 466

Configure VRF for Ethernet interfaces 467

Configure VRF for GRE tunnel interfaces 467

Configuring Virtual Private Networking (VPN)

Virtual Private Networks (VPNs) 469

Configure Internet Protocol security (IPsec) 470

About Internet Protocol Security (IPSec) 471

Configure IPsec tunnels 473

Configure IPsec tunnel default action 487

Configure IPsec groups 489

Configure Dead Peer Detection (DPD) 498

Configure Internet Key Exchange (IKE) 500

Configure IKEv2 511

Configure Layer 2 Tunneling Protocol (L2TP) 517

Use X.509 certificates with IPsec tunnels 522

Digi TransPort® Routers User Guide 10

Configure Point-to-Point Tunneling Protocol (PPTP) 525

Configure OpenVPN 527

Additional information on OpenVPNconfiguration 527

Supported Cipher and Digest values for OpenVPN 534

Configuring Secure Sockets Layer (SSL)

About the Secure Sockets Layer (SSL) 536

Configure the SSL server 537

Configure SSL clients 539

Configuring Secure Shell (SSH) server and client

About the Secure Shell (SSH) server 542

Configure SSH servers 543

Configure the SSH client 548

Generate SSH private keys 553

Perform SSH authentication with a public/private key pair 555

Configuring FTP Relay

Configure FTP Relay 557

Configure FTP Relay agents 557

Configure Advanced FTP Relay parameters 560

Configure an SMTP client, as needed 561

Configuring IP passthrough

Configure IP passthrough 563

Configuring UDP echo

Configure a UDP echo client 567

Configuring Quality of Service (QoS)

Configure Quality of Service (QoS) 570

Configuring time bands

Configure a time band 578

Enable and disable time bands for a PPP or Wi-Fi interface 580

Configuring advanced network settings

Configure advanced network settings 583

Configure first settings group 583

Autres manuels pour TransPort WR11

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Digi Routeur réseau

Digi

Digi HR4420i Manuel utilisateur

Digi

Digi TX54 Manuel utilisateur

Digi

Digi ConnectPort X4 IA Manuel utilisateur

Digi

Digi Connect EZ 4 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Digi

Digi Connect IT 4 Manuel utilisateur

Digi

Digi TransPort WR31 Instructions d'installation

Digi

Digi TX54 Manuel utilisateur

Digi

Digi Connect Series Guide de l'utilisateur

Digi

Digi IX10-00G4 Manuel utilisateur

Digi

Digi TransPort WR41 Manuel utilisateur

Digi

Digi TransPort LR54 Manuel utilisateur

Digi

Digi WR41-G Manuel utilisateur

Digi

Digi TX64 Manuel utilisateur

Digi

Digi TransPort WR11 Manuel utilisateur

Digi

Digi 34 Instructions d'installation et d'utilisation

Digi

Digi XPressWireless Manuel utilisateur

Digi

Digi TransPort WR11 Manuel utilisateur

Digi

Digi TransPort WR64 Manuel utilisateur

Digi

Digi WR41v1 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Digi

Digi CR4110 Manuel utilisateur

Digi

Digi TransPort WR54 Guide d'application

Digi

Digi TA2020B Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur