Digi ConnectCore 8X Guide rapide de l'utilisateur

ConnectCore® 8X

System-on-Module

Hardware Reference Manual

ConnectCore® 8X System-on-Module Hardware Reference Manual 2

Revision history—90002295

Revision Date Description

1P December 2018 Initial release

2P January 2019 Added backdrive caution.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United

States and other countries worldwide. All other trademarks mentioned in this document are the

property of their respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a

commitment on the part of Digi International. Digi provides this document “as is,” without warranty of

any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or

merchantability for a particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Warranty

To view product warranty information, go to the following website:

www.digi.com/howtobuy/terms

Customer support

Gather support information: Before contacting Digi technical support for help, gather the following

information:

Product name and model

Product serial number (s)

Firmware version

Operating system/browser (if applicable)

Logs (from time of reported issue)

Trace (if possible)

Description of issue

Steps to reproduce

Contact Digi technical support: Digi offers multiple technical support plans and service packages.

Feedback

To provide feedback on this document, email your comments to

ConnectCore® 8X System-on-Module Hardware Reference Manual 3

techcomm@digi.com

Include the document title and part number (ConnectCore® 8X System-on-Module Hardware

Reference Manual, 90002295 2P) in the subject line of your email.

Contents

About the ConnectCore® 8X

Features and functionality 6

ConnectCore 8X module variants 9

Block diagrams 10

ConnectCore 8X module 11

NXP i.MX 8X application processor 12

The ConnectCore 8X System-on-Module

Power interfaces 12

System-on-Module input power supply 12

Internal Power Domains 13

Electrical characteristics 15

System power-up sequence 18

RTC power and coin cell charger 18

Reference power architecture scheme 19

Bootstrap 20

Wireless interfaces 21

WLAN IEEE 802.11a/b/g/n/ac 21

Bluetooth 27

MIMO 2x2 27

CryptoAuthentication device 27

The Micro Controller Assist™ hardware 27

About the Micro Controller Assist 27

Module lines related to the MCA 28

Reset control 30

IOs 31

Watchdog 33

Real-time clock 33

Power management 33

MCA firmware update 36

IOMUX

Module pinout 38

IOMUX table 39

Extended LGAVerson 56

ConnectCore® 8X System-on-Module Hardware Reference Manual 4

ConnectCore® 8X System-on-Module Hardware Reference Manual 5

Module specifications

Environmental specifications 89

About the ConnectCore® 8X

The ConnectCore 8X delivers a secure and extremely cost-effective connected System-on-Module

platform that is slightly bigger than a postage stamp. Its innovative Digi SMTplus™ (patent-pending)

surface mount form factor allows you to choose simplified design integration leveraging proven and

easy-to-use edge-castellated SMT technology, or a versatile LGA option for ultimate design flexibility

with access to virtually all interfaces.

Built on the NXP i.MX 8X application processor, the module is the intelligent communication engine for

today’s secure connected devices. It seamlessly integrates dual-Ethernet and pre-certified dual-band

Wi-Fi (802.11a/b/g/n/ac) with Bluetooth 4.2 dual mode connectivity.

Features and functionality

The ConnectCore 8X System-on-Module is based on the i.MX 8X processor from NXP. This processor

offers a number of interfaces, some of them multiplexed and not available simultaneously. The module

has the following features:

ni.MX 8X dual/quad Arm Cortex-A35 and single Cortex-M4F cores:

lCortex-A35 cores operate up to 1.2 GHz, and support Arm virtualization extensions.

lCortex-M4F core operates up to 266 MHz.

lAArch64 for 64-bit support.

lAArch32 for backward compatibility with Armv7.

nSystem Control Unit (SCU):

lPower control, clocks, reset.

lBoot ROMs.

lPMIC interface.

lResource Domain Controller.

nGraphics Processing Unit (GPU):

l4x Vec4 shaders with 16 execution units.

lSupports OpenGL 3.0, 2.0; OpenGL EX 3.1, 3.0, 2.0 and 1.1: OpenCL 1.2 FP and 1.1; OpenVG

1.1; and Vulkan.

lHigh-performance 2D Blit Engine.

ConnectCore® 8X System-on-Module Hardware Reference Manual 6

About the ConnectCore® 8X Features and functionality

ConnectCore® 8X System-on-Module Hardware Reference Manual 7

nVideo Processing Unit (VPU):

lH.265 decode (4Kp30).

lH.264 decode (1080p60).

lVP6/VP8 decode (1080p60).

lMPEG-2 decode (1080p60).

lMPEG4, H263, Sorenson Spark decode (1080p).

lRealVideo decode (1080p).

lJPEG dec (64Kx64K image size).

lH.264 encode (1080p30).

nUp to 4 GB, 32-bit LPDDR4-1200 memory.

n8 GB, 8-bit eMMC memory. Higher density available depending on product variant.

nNXP PF8100 Power Management IC (PMIC):

l7x DC/DC buck converters.

l4x LDO regulators.

lOTP (one-time-programmable) memory.

lCoin cell charger.

nCryptoAuthentication device.

nSecurity accelerators:

lEnhanced High Assurance Boot (HAB) secure and encrypted boot.

lRandom Number Generator with a high-quality entropy source generator and NIST

certifiable HMAC-based DRBG.

lRSA up to 4096, Elliptic Curve up to 1023

lDedicated Security Controller for Flashless SHE and HSM support, Trustzone, RTIC.

lBuilt-in ECDSA/DSA protocol support.

l10x Tamper pins, up to 5 active or 10 passive.

lVoltage and temperature tamper detection to help prevent against side-channel style

attacks.

l64 kB Secure RAM (can be erased via tamper detection).

n2x2 MIMO IEEE802.11 a/b/g/n/ac.

nBluetooth 4.2.

nDebug interfaces:

lSystem JTAG controller.

lSingle Wired Debug (SWD) interface for the MCA.

About the ConnectCore® 8X Features and functionality

ConnectCore® 8X System-on-Module Hardware Reference Manual 8

ni.MX 8X interfaces:

lPCIe 3.0 with L1 substate support. In wireless modules, this interface is used by the

Wireless MAC and it's not available for general purposes.

l1x USBOTG 3.0 with PHY - USB 3.0 can be used as USB 2.0.

l1x USBOTG 2.0 (with PHY).

l2x Gb Ethernet with AVB.

l3x CAN/CAN-FD.

lMedia Local Bus (MLB25/50).

l6x UARTs:

o4x UARTs, three of them support hardware flow control. One of the UARTs with

hardware flow control is used is used by the Bluetooth and it's not available for general

purposes.

o1x UART tightly coupled with Cortex-M4F cores.

o1x SCU (not available for general use).

l10x I2C. Note that I2C ports associated with a specific PHY (e.g. MIPI DSI) can be used

generally but require the PHY to be powered on even if the PHY itself is not used:

o4x I2C: High Speed, DMA support. One of them (I2C0) is used internally in the SoM and is

not available for general purposes.

o4x I2C: Low Speed, no DMA support.

o1x I2C: PMIC control (dedicated).

o1x I2C: Cortex M4F (dedicated).

l4x SAI:

oSAI0 and SAI1 are transmit/receive.

oSAI2 and SAI3 are receive only.

l1x Enhanced Serial Audio Interface (ESAI).

l2x ASRC (Asynchronous Sample Rate Converter).

l1x SPDIF.

lMPEG-2 Transport Stream.

l1x 12-bit, 6 channel ADC converter.

l3.3 V/1.8 V GPIO.

l4x PWM channels.

l1x 4x4 KPP (Key Pad Port).

l1x MQS (Medium Quality Sound).

l4x SPI.

About the ConnectCore® 8X ConnectCore 8X module variants

ConnectCore® 8X System-on-Module Hardware Reference Manual 9

nArm Cortex-M0+ Micro Controller AssistTM (MCA) subsystem:

lCortex-M0+ core operates up to 48 MHz.

lPower and reset control.

lRTC.

lPeripherals:

o1x UART operating up to 1.5 Mbit/s.

o2x low-power UART modules supporting asynchronous operation in low-power modes.

o2x I2C modules supporting up to 1 Mbit/s.

o2x 16-bit SPI modules supporting up to 24 Mbit/s for SPI1 and 12 Mbit/s for SPI0.

o1x FlexIO module supporting emulation of additional UART, SPI, I2C, I2S, PWM and other

serial modules.

o1x 16-bit ADC module with high accurate internal voltage reference, up to 20 channels

and up to 818 ksps at equal to or less than 13-bit mode.

oHigh-speed analog comparator containing a 6-bit DAC for programmable reference

input.

ConnectCore 8X module variants

Smart part

number

Part

number

ConnectCore

8X SoM

variant Description CPU1eMMC LDPDR4

WiFi+

Bluetooth

CC-WMX-

JM7D-NN

55001984-

0x01 ConnectCore

QuadXPlus

1.2GHz, 8GB

eMMC, 1GB

LPDDR4, -

40/+85C,

Wireless,

Bluetooth

QuadXPlus

Quad-core

Automotive

with

Cortex-M4,

VPU, GPU -

40ºC/125ºC

1.2GHz

8GB 1GB YES

CC-WMX-

JM8E-NN

55001984-

0x02 ConnectCore

QuadXPlus

1.2GHz,

16GB eMMC,

2GB LPDDR4,

-40/+85C,

Wireless,

Bluetooth

QuadXPlus

Quad-core

Automotive

with

Cortex-M4,

VPU, GPU -

40ºC/125ºC

1.2GHz

16GB 2GB YES

About the ConnectCore® 8X Block diagrams

ConnectCore® 8X System-on-Module Hardware Reference Manual 10

Smart part

number

Part

number

ConnectCore

8X SoM

variant Description CPU1eMMC LDPDR4

WiFi+

Bluetooth

CC-MX-

JM8D-ZN

55001984-

0x03 ConnectCore

QuadXPlus

1.2GHz, 8GB

eMMC, 2GB

LPDDR4, -

40/+85C

QuadXPlus

Quad-core

Automotive

with

Cortex-M4,

VPU, GPU -

40ºC/125ºC

1.2GHz

8GB 2GB NO

CC-WMX-

JN7D-NN

55001984-

0x04 ConnectCore

8X DualXPlus

1.2GHz, 8GB

eMMC, 1GB

LPDDR4, -

40/+85C,

Wireless,

Bluetooth

DualXPlus

Dual-core

Automotive

with

Cortex-M4,

VPU, GPU -

40ºC/125ºC

1.2GHz

8GB 1GB YES

CC-MX-

JN7D-ZN

55001984-

0x05 ConnectCore

8X DualXPlus

1.2GHz, 8GB

eMMC, 1GB

LPDDR4, -

40/+85C

DualXPlus

Dual-core

Automotive

with

Cortex-M4,

VPU, GPU -

40ºC/125ºC

1.2GHz

8GB 1GB NO

1CPU temperature is Tj (junction)

Block diagrams

The following figures show block diagrams of the ConnectCore 8X module and of the NXP i.MX 8X

application processor.

Autres manuels pour ConnectCore 8X

Table des matières

Autres manuels Digi Unité de contrôle

Digi

Digi XBee Manuel utilisateur

Digi

Digi XBEE-PRO S3 Manuel utilisateur

Digi

Digi XBee3-PRO Micro Guide rapide de l'utilisateur

Digi

Digi XBee ZNet 2.5 Manuel utilisateur

Digi

Digi ConnectCore 9P 9215 Guide d'application

Digi

Digi XBee3 802.15.4 Manuel utilisateur

Digi

Digi XLR PRO Manuel utilisateur

Digi

Digi XBee Manuel utilisateur

Digi

Digi XBee Manuel utilisateur

Digi

Digi XBee 3802.15.4 Manuel utilisateur

Digi

Digi INFOTAG 2.13 Manuel utilisateur

Digi

Digi Connect Wi-ME 9210 Manuel utilisateur

Digi

Digi ConnectCore 6UL Guide rapide de l'utilisateur

Digi

Digi Connect Wi-Wave Guide d'application

Digi

Digi WB-20 Manuel utilisateur

Digi

Digi Digi One EM Guide d'application

Digi

Digi XBee SX 868 Manuel utilisateur

Digi

Digi XBee3 802.15.4 Manuel utilisateur

Digi

Digi ConnectCore 8X Guide rapide de l'utilisateur

Digi

Digi MiniCore RCM5700 Series Manuel utilisateur

Digi

Digi XBee Manuel utilisateur

Digi

Digi Connect ME Guide d'application

Digi

Digi ConnectCore 6 Manuel utilisateur

Digi

Digi Connect Wi-Wave 802.11 b/g Guide d'application

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur