DIEBOLD NIXDORF P1200 Manuel du propriétaire

P1200 Standard POS Printer

Programming Manual

01750353820B

PROGRAMMING GUIDE

Contents

General......................................................................................................................................1

1. Printer basic functions .....................................................................................................1

1.1 General.............................................................................................................................. 1

1.2 Internal Buffers ................................................................................................................... 2

1.2.1 RAM (Total Size: IRAM 1.5MB, DRAM 8MB).................................................................... 2

1.2.2 FlashMemory (TotalSize: 8MB)..................................................................................... 2

2. Summary of Option Interface..........................................................................................3

2.1 RS232C Interface................................................................................................................ 3

2.2 Ethernet Interface................................................................................................................ 3

2.2.1 TCP Socket................................................................................................................. 3

2.2.2 UDP Socket................................................................................................................. 3

2.2.3 SNMP......................................................................................................................... 3

2.2.4 DHCP......................................................................................................................... 4

2.2.5 HTTP.......................................................................................................................... 4

Emulation .................................................................................................................................5

3. Command Descriptions .................................................................................................13

3.1 PrinterFunction Command..................................................................................................13

3.1.1 Clear Printer...............................................................................................................13

3.1.2 Perform Full Knife Cut..................................................................................................13

3.1.3 Perform Partial Knife Cut ..............................................................................................13

3.1.4 Generate Tone............................................................................................................13

3.1.5 Initialize Printer............................................................................................................13

3.1.6 Select Sensors to Stop Printing......................................................................................13

3.1.7 Enable or Disable FeedButton......................................................................................14

3.1.8 Generate Pulse to Open Cash Drawer............................................................................14

3.1.9 Select Cut Mode andCutPaper.....................................................................................14

3.1.10 Print Configuration Form...............................................................................................15

3.1.11 Receipt shooting flush..................................................................................................15

3.1.12 Play melody................................................................................................................15

3.1.13 Switch the printer into Sleep-Mode.................................................................................17

3.2 VerticalPositioning andPrint Commands...............................................................................18

3.2.1 Print and Feed PaperOne Line......................................................................................18

3.2.2 Print and Carriage Return.............................................................................................18

3.2.3 Feed n Print Lines........................................................................................................18

PROGRAMMING GUIDE

iii

3.2.4 Feed n Dot Rows.........................................................................................................18

3.2.5 Add nExtra Dot Rows..................................................................................................18

3.2.6 Print..........................................................................................................................19

3.2.7 Set LineSpacingto 1/6 Inch..........................................................................................19

3.2.8 Set Line Spacing.........................................................................................................19

3.2.9 Print and Feed Paper...................................................................................................19

3.2.10 Print and Feed n Lines .................................................................................................19

3.2.11 Set Horizontal and Vertical Minimum Motion Units............................................................20

3.3 Horizontal Positioning Commands.........................................................................................21

3.3.1 Horizontal Tab.............................................................................................................21

3.3.2 Set Column.................................................................................................................21

3.3.3 Set Absolute Starting Position........................................................................................21

3.3.4 Set Horizontal Tabs .....................................................................................................21

3.3.5 Set Relative PrintPosition.............................................................................................21

3.3.6 Select Justification.......................................................................................................22

3.3.7 Set Left Margin............................................................................................................22

3.3.8 Set Print AreaWidth.....................................................................................................22

3.4 Print Characteristic Commands ............................................................................................24

3.4.1 Select Double-Wide Characters.....................................................................................24

3.4.2 Select Single-Wide Characters ......................................................................................24

3.4.3 Select 90 Degrees Counter-Clockwise Rotated Print.........................................................24

3.4.4 Select Pitch (ColumnWidth)..........................................................................................24

3.4.5 Set Character Right-Side Spacing..................................................................................24

3.4.6 Select Print Modes1......................................................................................................25

3.4.7 Select or Cancel Font Smoothing...................................................................................25

3.4.8 Select or Cancel User-defined CharacterSet...................................................................25

3.4.9 Define User-defined Characters.....................................................................................26

3.4.10 Select or Cancel Underline Mode...................................................................................27

3.4.11 Copy Character Set from ROM to RAM...........................................................................27

3.4.12 Cancel User-defined Characters....................................................................................27

3.4.13 Select or Cancel Emphasized Mode...............................................................................27

3.4.14 Select Double Strike.....................................................................................................27

3.4.15 Select or Cancel Italic Print...........................................................................................28

3.4.16 Select International CharacterSet (DNEmulation)............................................................28

3.4.17 Select International CharacterSet.(ESCPOS emulation)....................................................29

3.4.18 Select character code table(ESCPOS emulation) .............................................................30

3.4.19 Select or Cancel Unicode(UTF-16) Mode........................................................................31

3.4.20 Select or Cancel 90 Degrees Clockwise Rotated Print.......................................................31

3.4.21 Select Print Color.........................................................................................................31

3.4.22 Select or Cancel Upside & Down Printing Mode...............................................................32

PROGRAMMING GUIDE

3.4.23 Select CharacterSize...................................................................................................32

3.4.24 Select or CancelWhite/Black Reverse Printing Mode........................................................33

3.4.25 Selects Superscript or Subscript Modes..........................................................................33

3.5 Graphics Commands ..........................................................................................................34

3.5.1 Print RasterGraphics...................................................................................................34

3.5.2 Print RasterColor Graphics...........................................................................................34

3.5.3 Define BitmapFile as Logo...........................................................................................34

3.5.4 Select Bit ImageMode.................................................................................................35

3.5.5 Select bit-image mode - Line Graphics............................................................................36

3.5.6 Turn on/off TIFF compression........................................................................................37

3.5.7 Print Advanced RasterGraphics....................................................................................37

3.5.8 Select Single Density Graphics......................................................................................38

3.5.9 Select Double-Density Graphics.....................................................................................38

3.5.10 Print raster bit image....................................................................................................38

3.5.11 Select theCurrent Logo................................................................................................38

3.5.12 Define Bit Image as Logo..............................................................................................40

3.5.13 Print Current Logo.......................................................................................................41

3.5.14 Print Logo...................................................................................................................41

3.5.15 Define Logo in Flash Memory........................................................................................41

3.5.16 Convert 6 Dots/mmBitmap to 8 Dots/mm........................................................................42

3.5.17 Transmit entire capacity of User-defined logo in Flash Memory...........................................42

3.5.18 Transmit Remaining Size for User-defined Logo Area in Flash Memory ...............................42

3.5.19 Transmit Remaining Size for User-defined Logo Area in RAM............................................43

3.5.20 Transmit the key code for User-defined Logo in FlashMemory...........................................43

3.5.21 Delete all Logo in Flash Memory....................................................................................44

3.5.22 Delete User-defined Logo inFlashMemory.....................................................................44

3.5.23 Define Logo in Flash Memory by the keycode.................................................................44

3.5.24 Print User-defined Logo in Flash Memory........................................................................46

3.5.25 Transmit the key code for User-defined Logo in RAM........................................................46

3.5.26 Delete all User-defined Logo in RAM..............................................................................47

3.5.27 Delete User-defined Logo inRAM..................................................................................48

3.5.28 Define Logo in RAM bythe key code..............................................................................48

3.5.29 Print User-defined Logoin RAM.....................................................................................49

3.5.30 EnableWatermark printing............................................................................................49

3.5.31 Transmits set values for Watermark................................................................................51

3.5.32 Transmit Remaining Size for User-defined Logo Area.......................................................51

3.5.33 Store the graphics data in the print buffer ........................................................................52

3.5.34 Print the graphics data in the print buffer .........................................................................52

3.5.35 Download logo image...................................................................................................53

3.5.36 Cancel set values for top/bottom logo printing..................................................................54

PROGRAMMING GUIDE

3.5.37 Transmits set values for top/bottom logo printing..............................................................54

3.5.38 Set top logo printing.....................................................................................................56

3.5.39 Set bottom logo printing................................................................................................56

3.5.40 Make extended settings for top/bottom logo printing..........................................................57

3.5.41 Enable/disable top/bottom logo printing...........................................................................57

3.5.42 Define Windows BMP graphics data in Flash Memory.......................................................58

3.5.43 Define Windows BMP graphics data in RAM....................................................................58

3.6 Status Commands..............................................................................................................60

3.6.1 Transmit Peripheral Device Status .................................................................................61

3.6.2 TransmitPrinterStatus.................................................................................................61

3.6.3 TransmitPrinterID.......................................................................................................61

3.6.4 Transmit PrinterID, Remote Diagnostics Extension..........................................................64

3.6.5 Enable/disable Automatic Status Back (ASB)...................................................................65

3.6.6 Initialize maintenance counter........................................................................................67

3.6.7 Transmit maintenancecounter.......................................................................................69

3.6.8 TransmitStatus...........................................................................................................70

3.6.9 Send Printer Firmware Version......................................................................................71

3.6.10 Real time commands disabled.......................................................................................71

3.6.11 Execute HeadFailure Detection.....................................................................................72

3.6.12 Get Detail of Head Failure Detection...............................................................................72

3.6.13 Setcontrol point..........................................................................................................72

3.7 Real Time Commands.........................................................................................................74

3.7.1 Real Time Status Transmission.....................................................................................74

3.7.2 Real Time Request to Printer.........................................................................................76

3.7.3 Enable/disable real-time command.................................................................................76

3.7.4 Generate pulse in real-time...........................................................................................77

3.7.5 Execute power-offsequence.........................................................................................77

3.7.6 Control Buzzer(Internal buzzer).....................................................................................78

3.7.7 Select peripheral device................................................................................................78

3.7.8 Clear buffer(s).............................................................................................................78

3.7.9 Extended Real-Time Status Transmission.......................................................................79

3.7.10 Real Time Printer Status Transmission...........................................................................82

3.7.11 LED Control Request...................................................................................................82

3.7.12 Real-Time Printer Maintenance......................................................................................83

3.8 Bar Code Commands..........................................................................................................85

3.8.1 Select PrintingPositionof HRI Characters.......................................................................85

3.8.2 Select Pitch for HRI Characters .....................................................................................85

3.8.3 Select BarCode Height................................................................................................85

3.8.4 Print Bar Code............................................................................................................85

3.8.5 PDF417: Set the rowheight..........................................................................................91

PROGRAMMING GUIDE

3.8.6 PDF417: Set the error correctionlevel ............................................................................91

3.8.7 PDF417: Selectthe options...........................................................................................92

3.8.8 PDF417: Store the data inthe symbol storage area..........................................................92

3.8.9 PDF417: Printthe symbol data in the symbol storage area.................................................92

3.8.10 PDF417: Transmit the size information ofthe symbol data in the symbol storage area ...........93

3.8.11 QR Code:Select the model...........................................................................................93

3.8.12 QR Code:Set thesize ofmodule...................................................................................93

3.8.13 QR Code:Select the error correction level.......................................................................94

3.8.14 QR Code:Select encode modes....................................................................................94

3.8.15 QR Code:Store the data in thesymbolstorage area.........................................................95

3.8.16 QR Code:Print thesymbol data in thesymbolstorage area...............................................95

3.8.17 QR Code: Transmit thesize information ofthe symbol data in the symbol storage area..........95

3.8.18 2-dimensional GS1 DataBar: Set the module width...........................................................96

3.8.19 2-dimensional GS1 DataBar: Set themaximum width of GS1 DataBar Expanded Stacked......96

3.8.20 2-dimensional GS1 DataBar: Store data in the symbol storage area....................................97

3.8.21 2-dimensional GS1 DataBar: Print data in the symbol storage area.....................................97

3.8.22 2-dimensional GS1 DataBar: Transmitsize information ofthe symbol data in the symbol storage

area 98

3.8.23 Select PDF 417 parameters ..........................................................................................98

3.8.24 DataMatrix: Set thesymbol type, number ofcolumns, numberof rows...............................100

3.8.25 DataMatrix: Set the size of the module..........................................................................102

3.8.26 DataMatrix: Store the data in the symbol storage area.....................................................102

3.8.27 DataMatrix: Print the symbol data in the symbol storage area...........................................103

3.8.28 DataMatrix: Transmit the size information of thesymbol data in thesymbolstorage area......104

3.9 Page Mode Commands.....................................................................................................105

3.9.1 Print and Return to Standard Mode..............................................................................105

3.9.2 Print and feed marked paperto print starting position......................................................105

3.9.3 Cancel Print Data in Page Mode..................................................................................105

3.9.4 Print Data in Page Mode.............................................................................................106

3.9.5 Select Page Mode.....................................................................................................106

3.9.6 Select Standard Mode................................................................................................106

3.9.7 Select Print Direction in PageMode..............................................................................106

3.9.8 Set PrintingArea in Page Mode...................................................................................107

3.9.9 Set Absolute Vertical Print Position in Page Mode..........................................................107

3.9.10 Set Relative VerticalPrint Position in PageMode ...........................................................108

3.10 Macro Commands............................................................................................................109

3.10.1 Start and Terminate Macro Definition............................................................................109

3.10.2 Execute Macro..........................................................................................................109

3.11 User Data Storage Commands...........................................................................................110

3.11.1 Write User Defined Data.............................................................................................110

PROGRAMMING GUIDE

vii

3.11.2 Read UserDefined Data.............................................................................................110

3.11.3 Select Memory Type for User Defined Data...................................................................110

3.11.4 FlashMemory Allocation for User-defined Storage Area..................................................111

3.11.5 Erase User-defined storage area in FlashMemory..........................................................111

3.11.6 PrinterSetting Change...............................................................................................113

3.11.7 Read PrinterSetting...................................................................................................120

3.11.8 LED Configuration.....................................................................................................120

3.11.9 Read LEDConfiguration.............................................................................................121

3.11.10 Change into the usersetting mode...............................................................................121

3.11.11 End the user setting mode session...............................................................................122

3.11.12 Changes the memoryswitch........................................................................................122

3.11.13 Transmits the host the value for the memoryswitch........................................................124

3.11.14 Set thecustomized setting values ................................................................................124

3.11.15 Transmit the customized setting values.........................................................................131

3.11.16 Set theconfiguration item for theserial interface.............................................................133

3.11.17 Transmit the configuration item for theserial interface.....................................................134

3.11.18 Set Conditions for USBcommunication.........................................................................134

3.11.19 Transmitconditions for USBcommunication..................................................................134

3.11.20 Set Serial number......................................................................................................136

3.11.21 Set Production date...................................................................................................136

3.11.22 Sets communicationconditionof Ethernet interface. .......................................................136

3.11.23 Transmit communication condition of Ethernet interface...................................................137

3.11.24 Set adjustment value(s)..............................................................................................138

3.11.25 Set Paper type..........................................................................................................139

3.11.26 Text strike-through mode............................................................................................139

3.11.27 Download papertype description.................................................................................140

3.11.28 Return paper type description......................................................................................140

3.11.29 Set temporarymax target speed..................................................................................142

3.12 Asian charactercommand.................................................................................................143

3.12.1 Select printmodes for Asian characters ........................................................................143

3.12.2 Select Asian charactermode.......................................................................................143

3.12.3 Turn underline mode ON/OFF in Asian mode.................................................................143

3.12.4 Cancel Asiancharactermode......................................................................................143

3.12.5 Define user-defined Asian characters ...........................................................................144

3.12.6 Select Asian charactercodesystem.............................................................................144

3.12.7 Set Asiancharacterspacing........................................................................................145

3.12.8 Set quadruple mode ON/OFF in Asian mode.................................................................145

3.13 IPL(Initial Program Loader) Command.................................................................................146

3.13.1 Switch to Flash Download Mode..................................................................................146

3.13.2 Select Flash Memory Sector to Download .....................................................................146

PROGRAMMING GUIDE

viii

3.13.3 Get Firmware Sector CRC..........................................................................................146

3.13.4 Return IPL Firmware CRC..........................................................................................146

3.13.5 Erase all Flash Memory..............................................................................................147

3.13.6 Return Main Firmware CRC........................................................................................147

3.13.7 EraseSelected Flash Sector.......................................................................................147

3.13.8 Download to Active Flash Sector..................................................................................147

3.13.9 Reboot the Printer......................................................................................................147

3.14 Flash Download Commands in Main Firmware......................................................................149

3.14.1 Flash Firmware.........................................................................................................149

3.14.2 Activate Firmware in the alternative area.......................................................................149

3.15 Diagnostic Commands......................................................................................................151

3.15.1 Execute test print.......................................................................................................151

3.15.2 Dot check pattern test ................................................................................................151

3.15.3 Sensor Calibration.....................................................................................................152

3.15.4 Retrieve Detail Log....................................................................................................153

4. Appendix 1 Character sets..........................................................................................154

4.1 Charactercode table page 0 (PC437 : USA,Standard Europe)................................................154

4.2 Charactercode table Page 1 (PC850: Multilingual Latin I):......................................................154

4.3 Charactercode table Page 2 (PC852: Latin II): .....................................................................155

4.4 Charactercode table Page 3 (PC860: Portuguese):...............................................................155

4.5 Charactercode table Page 4 (PC863: Canadian French):.......................................................156

4.6 Charactercode table Page 5 (PC865: Nordic):......................................................................156

4.7 Charactercode table Page 6 (PC858: Multilingual I + Euro):...................................................157

4.8 Charactercode table Page 7 (PC866: Russian): ...................................................................157

4.9 Charactercode table Page 8 (WPC1252: Latin I):..................................................................158

4.10 Character code table Page 9 (PC862: Hebrew):....................................................................158

4.11 Character code table Page 10 (PC737: Greek): ....................................................................159

4.12 Character code table Page 11 (PC874: Thai):.......................................................................159

4.13 Character code table Page 12 (PC857: Turkish):...................................................................160

4.14 Character code table Page 13 (WPC1251: Cyrillic):...............................................................160

4.15 Character code table Page 14 (WPC1255: Hebrew):..............................................................161

4.16 Character code table Page 15 ((KZ_1048: Kazakh): ..............................................................161

4.17 Character code table Page 16 (WPC1254: Turkish):..............................................................162

4.18 Character code table Page 17 (WPC1250: Central Europe): ...................................................162

4.19 Character code table Page 18 (WPC28591: Latin 1):.............................................................163

PROGRAMMING GUIDE

4.20 Character code table Page 19 (WPC28592: Latin 2):.............................................................163

4.21 Character code table Page 20 (WPC28599: Turkish): ............................................................164

4.22 Character code table Page 21 (WPC28605: Latin 9):.............................................................164

4.23 Character code table Page 22 (PC864: Arabic):....................................................................165

4.24 Character code table Page 23 (PC720: Arabic):....................................................................165

4.25 Character code table Page 24 (WPC1256: Arabic): ...............................................................166

4.26 Character code table Page 25 (WPC28596: Arabic):..............................................................166

4.27 Character code table Page 26 (KATAKANA: Asia):................................................................167

4.28 Character code table Page 27 (PC775: Baltic): .....................................................................167

4.29 Character code table Page 28 (WPC1257: Baltic):.................................................................168

4.30 Character code table Page 29 (WPC28594: Baltic):...............................................................168

4.31 Character code table Page 30 (WPC1253: Greek):................................................................169

5. Appendix 2 Printable area...........................................................................................170

6. Appendix 3 Eco function..............................................................................................171

6.1 General...........................................................................................................................171

6.2 Paper reduction................................................................................................................171

6.2.1 Remove Upper Space................................................................................................171

6.2.2 Remove Lower Space................................................................................................172

6.2.3 Line Space Reduction................................................................................................172

6.2.4 Line Feed Reduction..................................................................................................173

6.2.5 Barcode Height Reduction..........................................................................................173

6.2.6 Registered Logo Removal...........................................................................................174

6.2.7 Force Single High Font...............................................................................................174

6.2.8 Remove linescontaining onlyspaces ...........................................................................174

6.3 Power reduction...............................................................................................................175

6.3.1 Bold Font Removal ....................................................................................................175

6.3.2 Force Single Wide Font..............................................................................................175

6.3.3 No White/Black Reverse Printing..................................................................................176

6.3.4 Stand-by Mode..........................................................................................................176

6.3.5 Power OffMode........................................................................................................176

6.3.6 Speed Reduction.......................................................................................................176

6.3.7 Density Reduction......................................................................................................176

6.4 Affected commands..........................................................................................................177

7. Appendix 4 Thai font support ......................................................................................178

7.1 Outline............................................................................................................................178

PROGRAMMING GUIDE

7.2 Thai characterconfiguration...............................................................................................178

7.3 Thai characterdata procedure............................................................................................179

7.4 The notes for this function..................................................................................................179

8. Appendix 5 Paper low detection .................................................................................181

9. Appendix 6 Barcode Information.................................................................................182

9.1 GS k Print Barcode...........................................................................................................182

9.2 GS (k Print 2-dimensional Barcode.....................................................................................192

Diagnostics ..........................................................................................................................194

10. Offline Diagnostic.........................................................................................................194

10.1 Offline Printer Configuration...............................................................................................194

10.2 P1200 Diagnostic Functions...............................................................................................207

10.2.1 SelftestPrintout.........................................................................................................207

10.2.2 Sensor Test..............................................................................................................210

10.2.3 BlackMark test..........................................................................................................210

Printer Errors.......................................................................................................................211

11. Error Detection.............................................................................................................211

12. LED Indication..............................................................................................................213

11.1 LED Pattern in Auto Mode.................................................................................................213

11.2 LED Pattern in User Mode.................................................................................................214

Ethernet................................................................................................................................215

13. Web setting page.........................................................................................................215

Autres manuels pour P1200

Table des matières

Autres manuels DIEBOLD NIXDORF Imprimante

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1200 Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1300 Mode d'emploi

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1300 Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF TH210-VI Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1200 Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1200 Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF TH250 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur