DFI NT70-SC Manuel utilisateur

NT70-SCNT70-SC

NT70-SC

Rev. A+Rev. A+

Rev. A+

System BoardSystem Board

System Board

User’s ManualUser’s Manual

User’s Manual

52300135

CopyrightCopyright

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose. The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

TrademarksTrademarks

Trademarks

Windows®98, Windows®98 SE, Windows®ME, Windows®2000

and Windows NT®4.0 are registered trademarks of Microsoft

Corporation. Intel®and Pentium®4 are registered trademarks of

Intel Corporation. Award is a registered trademark of Award

Software, Inc. Other trademarks and registered trademarks of

products appearing in this manual are the properties of their

respective holders.

CautionCaution

Caution

To avoid damage to the system:

• Use the correct AC input voltage range..

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend

the manufacturer.

• Dispose of used batteries according to the battery

manufacturer’s

instructions.

Joystick or MIDI port:

• Do not use any joystick or MIDI device that requires more than

10A current at 5V DC. There is a risk of fire for devices that

exceed this limit.

FCC and DOC Statement on Class BFCC and DOC Statement on Class B

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

2. Shielded interface cables must be used in order to comply with

the emission limits.

Introduction

Table of Contents

Chapter 1 - Introduction

1.1 Features and Specifications..................................................................................

Chapter 2 - Hardware Installation

2.1 System Board Layout ..........................................................................................

2.2 System Memory...........................................................................................................

2.3 Jumper Settings for Clearing CMOS Data........................................

2.4 Jumper Settings for Wake-On-Keyboard/Mouse..................................

2.5 Jumper Settings for Wake-On-USB Keyboard/Mouse.............

2.6 Jumper Settings for Selecting the CPU’s Front Side Bus.............

2.7Jumper Settings for USB 4................................................................................

2.8Factory Use Jumpe.................................................................

2.9Ports and Connectors.................................................................................................

Chapter 3 - Award BIOS Setup Utility

3.1The Basic Input/Output System.....................................................................

3.1.1 Standard CMOS Features.............................................................

3.1.2 Advanced BIOS Features..............................................................

3.1.3 Advanced Chipset Features ......................................................

3.1.4 Integrated Peripherals.........................................................................

3.1.5 Power Management Setup............................................................

3.1.6 PnP/PCI Configurations....................................................................

3.1.7 PC Health Status...................................................................................

3.1.8 CPU Frequency Control..................................................................

3.1.9 Load Fail-Safe Defaults.....................................................................

3.1.10 Load Optimized Defaults..............................................................

3.1.11 Set Supervisor Password...............................................................

3.1.12 Set User Password..............................................................................

3.1.13 Save & Exit Setup.................................................................................

3.1.14 Exit Without Saving..............................................................................

Introduction

1.1 Features and Specifications

1.1.1 Features

Chipset

• Intel®850 chipset

- Intel®82850 Memory Controller Hub (MCH)

- Intel®82801 I/O Controller Hub (ICH2)

Processor

The system board is equipped with Socket 478 for installing a

Pentium®4 processor.

• Intel®Pentium®4 processor (478-pin)

• 400MHz system data bus

System Memory

• Four 184-pin RIMM sockets

- Two Direct-RDRAM channels with two RIMMs per channel

• Supports 128MB to 2GB system memory using 64Mbit,

128Mbit or 256Mbit technology, PC-600 or PC-800 RDRAM

• Supports ECC function

Please refer to “System Memory” in chapter 2 for more information.

Chapter1-Introduction

Introduction

Expansion Slots

The system board is equipped with 1 AGP slot, 4

dedicated PCI slots and 1 shared PCI/CNR slot.

The AGP slot only supports 1.5V AGP 4x (1066MB/sec.

bandwidth) add-in cards. AGP is an interface designed

to support high performance 3D graphics cards for 3D

graphics applications. It handles large amounts of

graphics data with the following features:

• Pipelined memory read and write operations that hide

memory access latency.

• Demultiplexing of address and data on the bus for

nearly 100 percent efficiency.

CNR (Communication and Networking Riser) is an

interface that supports multi-channel audio, V.90

analog modem, phone-line based networking or 10/100

Ethernet based networking riser board.

Onboard Audio Features

• 18-bit stereo full-duplex codec with independent

variable sampling rate

• High quality differential CD input

• True stereo line level outputs

Compatibility

• Microsoft PC 2001 compliant

• PCI 2.2, CNR 1.0 “A” type and AC ’97 compliant

• Intel AGP version 2.0

Introduction

ATX Double Deck Ports (PC 99 color-coded connectors)

• Two USB ports

• Two NS16C550A-compatible DB-9 serial ports

• One DB-25 parallel port

• One mini-DIN-6 PS/2 mouse port

• One mini-DIN-6 PS/2 keyboard port

• One game/MIDI port

• Three audio jacks: line-out, line-in and mic-in

Connectors

• One connector for 2 additional external USB ports

• One connector for IrDA interface

• Two IDE connectors

• One floppy drive interface supports up to two

2.88MB floppy drives

• Three ATX power supply connectors

• One Wake-On-LAN connector

• One Wake-On-Ring connector

• CPU, chassis and second fan connectors

• One opened chassis alarm connector (optional)

• Two internal audio connectors (CD-in and TAD)

PCI Bus Master IDE Controller

• Two PCI IDE interfaces support up to four IDE

devices

• Supports ATA/33, ATA/66 and ATA/100 hard drives

• PIO Mode 4 Enhanced IDE (data transfer rate up to

14MB/sec.)

• Bus mastering reduces CPU utilization during disk

transfer

• Supports ATAPI CD-ROM, LS-120 and ZIP

IrDA Interface

The system board is equipped with an IrDA connector

for wireless connectivity between your computer and

peripheral devices. It supports peripheral devices that

meet the IrDA or ASKIR standard.

Introduction

USB Ports

The system board supports 4 USB ports. Two onboard

USB ports are located at the ATX double deck ports of

the board. The J16/J50 connector on the system board

allows you to connect 2 more optional USB ports. These

optional USB ports, which are mounted on a card-edge

bracket, will be provided as an option. USB allows data

exchange between your computer and a wide range of

simultaneously accessible external Plug and Play

peripherals.

BIOS

• Award BIOS, Windows®98/2000/ME Plug and Play

compatible

• Supports SCSI sequential boot-up

• Flash EPROM for easy BIOS upgrades

• Supports DMI 2.0 function

Desktop Management Interface (DMI)

The system board comes with a DMI 2.0 built into the

BIOS. The DMI utility in the BIOS automatically records

various information about your system configuration

and stores these information in the DMI pool, which is

a part of the system board's Plug and Play BIOS. DMI,

along with the appropriately networked software, is

designed to make inventory, maintenance and

troubleshooting of computer systems easier. Refer to

chapter 4 for instructions on using the DMI utility.

1.1.2 System Health Monitor Functions

The system board is capable of monitoring the

following “system health” conditions.

• Monitors system temperature and overheat alarm

• Monitors 5VSB/VBAT/1.5V/3.3V/5V/±12V/CPU volt-

ages and failure alarm

• Monitors the fan speed of the CPU fan, chassis fan

and second fan; and failure alarm

Introduction

• Automatic chassis fan on/off control

• Read back capability that displays temperature,

voltage and fan speed

• Opened chassis alarm (optional)

Refer to the “PC Health Status” section in chapter 3 for

more information.

1.1.3 Intelligence

Automatic Chassis Fan Off

The chassis fan will automatically turn off once the

system enters the Suspend mode.

Dual Function Power Button

Depending on the setting in the “Soft-Off By PWR-

BTTN” field of the Power Management Setup, this switch

will allow the system to enter the Soft-Off or Suspend

mode.

Wake-On-Ring

This feature allows the system that is in the Suspend

mode or Soft Power Off mode to wake-up/power-on to

respond to calls coming through an internal or external

modem. Refer to “Wake-On-Ring Connector” in chapter

2 and “Resume On Ring” in the Power Management

Setup section in chapter 3 for more information.

Important:

If you are using a modem add-in card, the 5VSB

power source of your power supply must support

≥720mA.

Introduction

Wake-On-LAN

The Wake-On-LAN function allows the network to

remotely wake up a Soft Power Down (Soft-Off) PC.

Your LAN card must support the remote wakeup

function. Refer to “Wake-On-LAN Connector” in chapter

2 and “Resume On LAN” in the Power Management

Setup section in chapter 3 for more information.

Important:

The 5VSB power source of your power supply

must support ≥720mA.

Wake-On-Keyboard/Wake-On-Mouse

This function allows you to use the keyboard or PS/2

mouse to power-on the system. Refer to “Jumper

Settings for Wake-On-Keyboard/Wake-On-Mouse” in

chapter 2 and “Keyboard/Mouse Power On” in the

Integrated Peripherals section in chapter 3 for more

information.

Important:

• The power button will not function once a

keyboard password has been set in the “KB

Power On Password” field of the Integrated

Peripherals submenu. You must type the

correct password to power-on the system. If

you forgot the password, power-off the system

and remove the battery. Wait for a few seconds

and install it back before powering-on the

system.

• The 5VSB power source of your power supply

must support ≥720mA.

Table des matières

Autres manuels DFI Carte mère

DFI

DFI SB300-C Manuel utilisateur

DFI

DFI PR611-C621 Manuel utilisateur

DFI

DFI NP101-D16C Manuel utilisateur

DFI

DFI PW65 Series Manuel utilisateur

DFI

DFI CS632-Q370 Manuel utilisateur

DFI

DFI KD632-Q170 Manuel utilisateur

DFI

DFI PL610-C622 Manuel utilisateur

DFI

DFI NS30-SC/SL Manuel utilisateur

DFI

DFI AK70 Manuel utilisateur

DFI

DFI NS30-TC Manuel utilisateur

DFI

DFI LanParty KT400A Manuel utilisateur

DFI

DFI LanParty LT X38 series Manuel utilisateur

DFI

DFI 586ITBD Manuel utilisateur

DFI

DFI CS632-C246 Manuel utilisateur

DFI

DFI CS630-H310 Manuel utilisateur

DFI

DFI ak75-ec A+ Manuel utilisateur

DFI

DFI 661GX-MLV Manuel utilisateur

DFI

DFI CP900-B Manuel utilisateur

DFI

DFI G486-EVB Manuel utilisateur

DFI

DFI TGU171 Manuel utilisateur

DFI

DFI G5C100-N Manuel utilisateur

DFI

DFI CMS631-Q470E/H420E Manuel utilisateur

DFI

DFI CS331-C246 Manuel utilisateur

DFI

DFI 865PE-AE Manuel utilisateur

Manuels Carte mère populaires d'autres marques

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur