Delta RT Series Manuel utilisateur

Delta UPS - Amplon Family

The power behind competitiveness

www.deltapowersolutions.com

RT Series, Single Phase

1/ 2/ 3 kVA

User Manual

ESC

Amplon RT Series 2

SAVE THIS MANUAL

This manual contains important instructions and warnings that you should follow during

the installation, operation, storage and maintenance of this product. Failure to heed these

instructions and warnings will void the warranty.

(“Manual”), including but not limited to the contents, information, and figures are solely

owned and reserved by Delta Electronics Inc. (“Delta”). The Manual can only be applied to

the operation or the use of this product. Any disposition, duplication, dissemination,

reproduction, modification, translation, extraction, or usage of this Manual in whole or in part

is prohibited without the prior written permission of Delta. Given that Delta will continuously

improve and develop the product, changes may be made to the information in this Manual

at any time without obligation to notify any person of such revision or changes. Delta will

make all possible efforts to secure the accuracy and the integrity of this Manual. Delta

disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly or

implicitly, including but not limited to the completeness, faultlessness, accuracy, non-

infringement, merchantability or fitness for a particular purpose of the Manual.

Table of Content

Chapter 1 : Important Safety Instructions ..............................................................................5

1.1Safety Instructions ..............................................................................5

1.2Standard Compliance .........................................................................7

1.3Storage ...............................................................................................7

Chapter 2 : Introduction .........................................................................................................8

2.1General Overview ...............................................................................8

2.2Exterior & Dimensions ........................................................................8

2.3Package List .....................................................................................10

Chapter 3 : Operation Panel................................................................................................ 11

3.1LED Indicators .................................................................................. 11

3.2Multi-function Buttons .......................................................................12

3.3LCD Display ......................................................................................14

3.3.1Icon/ Display Definition .....................................................................15

3.3.2Operation Mode Diagram Definition .................................................16

Chapter 4 : Rear Panel........................................................................................................18

Chapter 5 : Communication Interfaces ................................................................................20

5.1MINI Slot ...........................................................................................20

5.2Dry Contacts .....................................................................................20

5.3REPO Port ........................................................................................20

5.4RS-232 Port ......................................................................................20

5.5USB Port ...........................................................................................21

5.6External Battery Connector...............................................................21

Chapter 6 : Installation.........................................................................................................24

6.1Rack Mounting ..................................................................................24

6.2Tower Mounting.................................................................................25

6.2Battery/ Battery Pack Replacement..................................................28

Chapter 7 : Connection and Wiring .....................................................................................29

7.1UPS Connection and Wiring Warnings.............................................29

7.2External Battery Pack Connection ....................................................29

Chapter 8 : Operation ..........................................................................................................30

8.1Start-up .............................................................................................30

Amplon RT Series 4

8.2Turn-off..............................................................................................32

8.3Operation Mode ................................................................................33

Chapter 9 : LCD Display & Settings ....................................................................................34

9.1Initial Setting Screen .........................................................................34

9.2Main Menu ........................................................................................35

9.2.1Measurement Menu ..........................................................................37

Chapter 10: Optional Accessories .......................................................................................47

Chapter 11 : Troubleshooting...............................................................................................48

Chapter 12: Maintenance ....................................................................................................50

Appendix 1 : Technical Specifications .................................................................................51

Appendix 2 : Warranty .........................................................................................................54

Chapter 1 : Important Safety Instructions

1.1 Safety Instructions

Installation Warnings

•Before installation and usage, please read this User Manual thoroughly. This helps you to use

the product correctly and safely.

•Install the UPS in a well-ventilated area, away from excess moisture, heat, dust, flammable gas

or explosives.

•To avoid fire accidents and electric shock, please install the UPS in a temperate and humidity

well-controlled indoor area free of conductive contaminants. For the temperature and humidity

specifications, please refer to Appendix 1 : Technical Specifications.

•Leave adequate space (at least 15 cm (5.91'')) around all sides of the UPS for proper ventilation.

Connection Warnings

•The UPS must be well grounded due to a possible risk of current leakage.

•The installation of upstream and downstream protective devices is highly recommended when

the UPS is connected to the mains and the loads.

•The protective devices connecting to the UPS must be installed near the UPS and must be easily

accessible for operation.

•If you need to move the UPS or perform re-wiring, please turn off the AC input power and ensure

that the UPS has been safely shutdown. Otherwise, the output end might still be energized,

which might cause electric shock.

Usage Warnings

The 2kVA and 3kVA UPSs are class-A products. In a domestic or an office environment, this

product may cause radio interference, in which case, users are required to take adequate

measures.

The UPS can be used to power computers and associated peripheral devices, such as monitors,

modems, cartridge tape drives, external hard drives, etc.

It is not recommended to connect the UPS with the following types of loads. For the load

suitability, please contact Delta customer service before purchasing:

1. regenerative loads (e.g. CNC machines and lifts).

2. asymmetrical loads (e.g. fans with half-bridge drivers and laser printers).

To ensure reliable operation of the UPS and to protect the UPS from overheating, the slits and

openings in the UPS must not be blocked or covered.

Before usage, you must allow the UPS to adjust to room temperature for at least one hour to

avoid moisture condensing inside the UPS.

Do not pour and splash any liquid on the UPS. Do not insert any object into the UPS’s slits and

openings. Do not put beverage containers on or around the UPS.

Amplon RT Series 6

When an emergency occurs, (1) press and hold the ON/OFF button ( ) for 3 seconds, (2)

release it after you hear one beep, (3) use the Scrolling UP or Down button ( / ) to select

‘Yes’, and (4) press the Enter button ( ) to confirm your selection to turn off the UPS. After

that, cut off the input power to shut down the UPS completely.

Do not use any cleaning liquid or cleaning spray to clean the UPS. Before cleaning, please make

sure that the UPS has been shut down completely, the UPS’s input power cord has been

unplugged, and the batteries have been disconnected.

All maintenance services must be performed by qualified service personnel.

Forbid opening or removing the cover of the UPS yourself to avoid high voltage electric shock.

You must contact qualified service personnel if either of the following events occurs:

1. Liquid is poured or splashed on the UPS.

2. The UPS does not run normally after this User Manual is carefully observed.

NOTE:

If you use the UPS in an area that generates or incurs dust, you should install two dust

filters (optional) in the 1/ 2/ 3kVA UPS to ensure normal product life and function.

Battery Warnings

Keep the batteries away from heat sources. Do not open or mutilate the batteries.

Do not dispose of batteries in a fire. The batteries may explode.

The released electrolyte is harmful to the skin and eyes and may be toxic.

A battery can present a risk of electric shock and high short-circuit current.

Servicing of batteries and battery packs must be performed or supervised by qualified service

personnel knowledgeable in the batteries, battery packs and required precautions.

The risk of electric shock and short-circuit current is possible when the batteries are connected

to the UPS. Before maintenance, disconnect all batteries to cut off the battery power.

For battery replacement, only use the same number and type of batteries.

Observe the following before replacing the batteries:

1. Remove watches, rings, or other metal objects.

2. Use tools with insulated handles.

3. Wear rubber gloves and boots.

4. Do not lay tools or metal parts on the top of batteries.

5. Disconnect the charging source prior to connecting or disconnecting battery terminals.

6. Remove every battery grounding during installation and maintenance to reduce the

likelihood of electric shock. If any part of the batteries is grounded, please remove the

grounding connection.

Do not connect the batteries in reverse; otherwise, a risk of electric shock or fire accidents might

occur.

The batteries might lose their power during shipment or storage. Before you use the UPS for the

first time, please fully charge the batteries until the battery percentage shown on the UPS’s LCD

is 100% ( ). If the UPS needs to be stored for an extended period of time, please recharge

the batteries every three months and ensure that, every time after recharging, the battery

percentage shown on the UPS’s LCD is 100% ( ).

WARNING:

1. The risk of electric shock and short-circuit current is possible when the batteries

are still connected to the UPS even though the UPS is disconnected from the

mains. Make sure to cut off the battery source before maintenance.

2. When the UPS is connected to an external battery pack, installation of

appropriate protective devices, such as DC fuses or a DC breaker, is required.

3. No matter whether you use the external battery pack(s) or not, always keep the

internal batteries connected.

1.2 Standard Compliance

1kVA: VCCI class B

2/ 3kVA: VCCI class A

1.3 Storage

Prior to installation

If the UPS needs to be stored prior to installation, it should be placed in a dry and well-ventilated

area. The allowable storage temperature is between -15°C (5°F) and +50°C (122°F).

•After usage

(1) Press and hold the ON/OFF button ( ) for 3 seconds, (2) release it after you hear one beep,

(3) use the Scrolling UP or Down button ( / ) to select ‘Yes’, and (4) press the Enter

button ( ) to confirm your selection to turn off the UPS. After that, make sure the UPS is shut

down, disconnect the UPS from the utility AC power, remove all loads/ equipment from the UPS,

and store the UPS in a dry and well-ventilated area at a temperature between -15°C (5°F ) and

+50°C (122°F).

Idle batteries must be recharged fully approximately every three months if the UPS needs to be

stored for an extended period of time. Ensure that, every time after charging, the battery

percentage shown on the UPS’s LCD is 100% ( ).

NOTE:

After storage and before start-up of the UPS, you must allow the UPS to adjust to room

temperature (20°C~25°C or 68°F~77°F) for at least one hour to avoid moisture condensing

inside the UPS.

Amplon RT Series 8

Chapter 2 : Introduction

2.1 General Overview

The RT series UPS is a single-phase input, single-phase output on-line uninterruptible power supply

which provides reliable and consistent sine-wave quality power to your electronic equipment. It adopts

the latest technology and the highest quality components providing output power factor up to 0.9, and

its efficiency in on-line mode reaches up to 91%. The UPS not only provides safe, reliable and

uninterruptible power to your sensitive electronic equipment at all times, but also produces greater

electronic power efficiency at less cost. There are three different ratings, 1kVA, 2kVA and 3kVA, for

your selection.

NOTE:

The RT series UPS has built-in batteries. Please refer to the table below.

UPS Capacity Built-in Battery Q’ty

1kVA 2 PCS

2kVA 4 PCS

3kVA 6 PCS

2.2 Exterior & Dimensions

•UPS102R1RT0B0B5

(Figure 2-1: 1kVA Exterior & Dimensions)

•UPS202R1RT0B0B5

(Figure 2-2: 2kVA Exterior & Dimensions)

•UPS302R1RT0B0B5

(Figure 2-3: 3kVA Exterior & Dimensions)

Amplon RT Series 10

2.3 Package List

The package contains the following items. Please check if any item is missing. If there is anything

missing, please contact the dealer immediately.

•UPS102/ 202/ 302R1RT0B0B5

No. Item Q’ty 1kVA 2kVA 3kVA

1 UPS 1 PC

2 User Manual 1 PC

3 USB cable 1 PC

4 Ear Bracket Kit 1 SET

5 Rail Kit 1 SET

6 Tower Stand 1 SET

7 Terminal Kit 1 SET

NOTE:

1. If there is any damage or anything missing, please immediately contact the dealer

from whom you purchased the unit.

2. If the UPS needs to be returned, carefully repack the UPS and all of the accessories

using the original packing material that came with the unit.

Autres manuels pour RT Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Delta UPS

Delta

Delta Modulon DPH series Manuel utilisateur

Delta

Delta Amplon MX Series Manuel utilisateur

Delta

Delta Amplon Series Manuel utilisateur

Delta

Delta VX Series Manuel utilisateur

Delta

Delta EH-10K Manuel utilisateur

Delta

Delta Amplon RT Series Manuel utilisateur

Delta

Delta NH Plus series Manuel utilisateur

Delta

Delta Amplon RT Series Manuel utilisateur

Delta

Delta Amplon UPS102N2000B035 Manuel utilisateur

Delta

Delta Modulon DPH series Manuel utilisateur

Delta

Delta HPH-60K Manuel utilisateur

Delta

Delta Agilon VX Series Guide de l'utilisateur

Delta

Delta DPH series Manuel utilisateur

Delta

Delta VX 600VA Instructions d'utilisation d'origine

Delta

Delta Ultron Series Manuel utilisateur

Delta

Delta Amplon N Series Manuel utilisateur

Delta

Delta Amplon UPA102R2RX2N035 Manuel utilisateur

Delta

Delta Amplon MBB RT Series Manuel utilisateur

Delta

Delta DPH series Manuel utilisateur

Delta

Delta Amplon RT Series Manuel utilisateur

Delta

Delta UPS102R2000B0B1 Instructions d'utilisation d'origine

Delta

Delta DPH series Manuel utilisateur

Delta

Delta Amplon RT Series Manuel utilisateur

Delta

Delta Ultron DPM Series Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur