Delta RetroSign GRX Manuel utilisateur

GRX Quick Guide V1.0

Quick Guide –RetroSign GRX

Getting started

The GRX is operated by a touch screen, where you can use these movements: tap,

swipe, and pinch. Alternatively, use the GRX trigger button.

Turn on the instrument: Press the red power button underneath the GRX housing.

The instrument turns on in less than a minute and in 1-2 seconds from stand-by mode.

Stand-by: To activate stand-by press the red power button shortly.

Switching off: Press the red power button for a couple of seconds until ‘Power off’ is written on the

touch screen. Then tap the screen to turn off the instrument completely.

Day-to-day operation

To start preparing a measurement press at the top left corner of the GRX touch screen (or

swipe the screen from left to right) to access the main menu

Follow the steps below in your daily workflow routine and follow the instructions on the GRX screen:

→→→→

Calibration Users Templates Series Measurements

1. Calibrate: Calibrate the instrument daily before conducting any measurements. Use the

calibration target (at the back of the angle adaptor) for verification and calibration of the

retroreflectometer. Calibration values can either be typed in by hand or scanned from the

barcode. Follow the instruction on the display.

2. Users: Create or select a user who performs the measurement.

3. Template: Create or select a template which specifies the data fields to be captured

during an inspection (retroreflection of background and legend colors). Choose between

single or multiple (2-10) shots per element, taking a photo of the object and data fields picked

from predefined fields or typed new. If single shot is chosen it will still be possible to enter

data fields but not to activate “Take picture” or automatically note if it is a background or

legend measurement. Single shot is made for fast measurements.

4. Series: Create or select an existing series based on a template. Your inspections are

automatically stored. Series is where data is stored and organized and the individual

measurements can be confirmed.

5. Measure: Conduct the measurements on-site. Press the trigger button to initiate an

inspection. For multiple shots the first step will be to confirm the series information (or modify

if required). If “Take picture” has been chosen this will be the next step followed by the

retroreflection measurements. During measurement follow the instruction on the display. For

single shots you will go directly to measure without the option of modifying entered data.

Power button

GRX Quick Guide V1.0

For “User”, “Template” and “Series” the following actions are available:

a) Filter or find, search for a previous entry

b) Edit , edit an entry

c) Add , add a new entry

d) Delete , delete an entry

e) Select by tapping an entry

All entries and measurements are automatically stored.

Please refer to the GRX user manual for further details and additional information.

Log: Examine the data log to view your inspections. To export or delete data series, swipe the

screen from right to left on the relevant series and these icons appear:

oExport data: export the logged data to a USB stick for further data processing,

analysis and reporting on a computer.

oDelete data. Note, all measurements within the data series will be deleted.

Important guidelines

Position the GRX instrument in close contact with the elements to be inspected to get the best

data quality. Use the red ‘measurement field center indicators’ on the side and bottom of the GRX

to check you are positioning the GRX correctly.

Keep the GRX lenses free of smear and dust.

If errors are detected during a measurement or calibration sequence, a message will be displayed

on the screen. Please refer to the GRX user manual for further details.

DELTA recommends re-calibrating or changing the calibration target bi-annually. If damaged or

dirty beyond cleaning the calibration target has to be changed immediate to ensure correct

measurement results.

Safety precautions

In case of any severe error condition remove the battery immediately.

Table des matières

Autres manuels Delta Instrument de mesure

Delta

Delta EMS 32-011 Manuel utilisateur

Delta

Delta LTL-X Mark II Manuel utilisateur

Delta

Delta RetroSign GR1 Manuel utilisateur

Delta

Delta XVR5116HS-I2 Manuel utilisateur

Delta

Delta HD2105.2 Manuel utilisateur

Delta

Delta UT-191T Manuel utilisateur

Delta

Delta HD2114P.0 Manuel utilisateur

Delta

Delta LTL3000 Manuel utilisateur

Delta

Delta DPM-D510 Manuel utilisateur

Delta

Delta MessageMaxx DMS-279 Manuel

Delta

Delta R4E Manuel utilisateur

Delta

Delta TECK II Manuel utilisateur

Delta

Delta LTL2000S Manuel utilisateur

Delta

Delta DPM-C510 Manuel utilisateur

Delta

Delta DPM-MA1121 Manuel utilisateur

Delta

Delta RetroSign GR1 Manuel utilisateur

Delta

Delta XVR5432L-I2 Manuel utilisateur

Delta

Delta UNOnext Manuel utilisateur

Delta

Delta DVP04TC-H2 Manuel utilisateur

Delta

Delta LTL-XL Manuel utilisateur

Delta

Delta DPM-C501L Manuel utilisateur

Delta

Delta CS-LDM-50M Manuel utilisateur

Delta

Delta dvp04pt-s Manuel utilisateur

Delta

Delta SS1-UM-1.05 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur