Delta LTL-XL Manuel utilisateur

QUICK GUIDE LTLXL-UK VERS 1.01.DOC 2008-10-31

Quick Guide - LTL-XL Retroreflectometer

Getting Started

Height Adjustment

Before using LTL-XL notice that the operating panel can be adjusted in height for ergonomic considerations. The

height is adjusted by pressing the red knob on the front of the instrument and at the same time lifting the handle on

the operating panel. Release the knob and continue lifting until the handle locks.

Measuring

Turn on the LTL-XL by pressing and holding the ON/OFF button until the display turns on. The display will

then change to the measure mode. An exception is when the instrument is set to ask for user identification, see

User select.

Calibrate the instrument if necessary, see Calibration.

Place the instrument on the road marking.

Press the big green OK-button to take a measurement. A measurement will be finished in 1-3 sec.

When the measurement is complete, the RL and/or Qd value will be displayed. Data is automatically transferred to

the data log. If there is a problem with the measurement a warning or an error icon will pop up (see Warnings and

Errors) and an audible alarm will sound (if enabled, see Sound).

To printout the last measurement data, press the PRINT button

Buttons

HELP Presents a help text for the actual

function. Another press on the

button will open up a general help

menu.

ON/OFF Is used to turn the instrument ON

or OFF. Press the button to turn

on the instrument. Press 0 to 4

sec. to change to sleep mode.

Press >4 sec. to turn off the

instrument.

MENU Selects the top level of the menu

tree. Use UP and DOWN to scroll

through the menu items. Press OK

to select.

SMART This button is user programmable

to one of several functions, e.g. to

clear the last measurement or

select measurement type.

HOME Will bring you back to measure

display. CALI-

BRATE

Starts the calibration wizard.

BACK Is used to go backward one step in

the menu. PRINT This button will print out the last

measurement or selected parts of

the log to the internal printer

(optional).

User select

If a user icon is shown in the top line of the display then from the measure display press▲and ◄or ►

buttons to mark the user icon. Press the OK button to enter the user select menu.

Series id select

From the measure display press ▲to mark the road icon . Press the OK button to enter the series id select

menu. To deactivate the series id press MENU and select SETTINGS/SERIED ID. Now select ACTIVATE and use

OK to change to OFF.

QUICK GUIDE LTLXL-UK VERS 1.01.DOC 2008-10-31

Calibration procedure

Before a calibration is carried out make sure that the calibration unit is clean.

Press the CALIBRATION button . Select RL and/or Qd calibration. Mount the calibration unit underneath

the instrument. Make sure that the pins on the interface plate fit into the holes in the calibration unit.

Press the OK button to start calibration. Check the value displayed and, if necessary, adjust the calibration

value shown in the display so it matches the value stamped on the calibration unit.

Press the OK button to finish the calibration or repeat if erroneous.

The calibration procedure is now done. Remove the calibration unit and store it properly. Press OK to return to the

measurement display.

Miscellaneous

The measure display can at all times be activated by pressing

Reset Log: Press the MENU button and select LOG/CLEAR DATA/ALL.

Date and Time: Press the MENU button and select SETTINGS/DATE & TIME/SET TIME/DATE. Select wanted

value and use ▲and ▼to set the time and date. Accept the setting by pressing the green

OK button. Alternatively SYNC TO GPS can be selected to auto set the time. Remember

also to set correct time zone.

Power Save: Press the MENU button and select SETTINGS/POWER. Select AUTO SLEEP or AUTO OFF

and use ▲or ▼to edit the auto turn off / sleep time. Accept the setting by pressing the

green OK button.

Sound: Press the MENU button and select SETTINGS/SOUND. SELECT KEY CLICK or

SOUNDS to set the individual sound levels for key click and miscellaneous system sounds.

Use ▲or ▼buttons to set the levels. Accept the setting by pressing the OK button.

Warnings and Errors: An error icon or warning icon will be displayed in the top line of the display

if a problem is detected when a measurement is taken. Press ▲to get a description of the

most severe error or warning. Now press the OK button to display a total list of errors or

warnings.

Autres manuels pour LTL-XL

Table des matières

Autres manuels Delta Instrument de mesure

Delta

Delta RetroSign GRX Manuel utilisateur

Delta

Delta DPM-C501L Manuel utilisateur

Delta

Delta dvp04pt-s Manuel utilisateur

Delta

Delta REVEZ-HD-TRIO DVB-T/T2 Manuel utilisateur

Delta

Delta LTL-X Mark II Manuel utilisateur

Delta

Delta R4E Manuel utilisateur

Delta

Delta UNO-C07X011 Manuel utilisateur

Delta

Delta DPM-D510 Manuel utilisateur

Delta

Delta DVP-ES2 Manuel utilisateur

Delta

Delta DPM-C320 Manuel utilisateur

Delta

Delta EMS 32-011 Manuel utilisateur

Delta

Delta PPM R4E Manuel utilisateur

Delta

Delta XVR5116HS-I2 Manuel utilisateur

Delta

Delta DPM-C510 Manuel utilisateur

Delta

Delta LTL3000 Manuel utilisateur

Delta

Delta HD2114P.0 Manuel utilisateur

Delta

Delta DPM-C530 Manuel utilisateur

Delta

Delta DPM-MA1121 Manuel utilisateur

Delta

Delta HD2114.0 Manuel utilisateur

Delta

Delta LTL-XL Manuel utilisateur

Delta

Delta DVP08NTC-S Manuel utilisateur

Delta

Delta DPM-D520I Manuel utilisateur

Delta

Delta MessageMaxx DMS-279 Manuel

Delta

Delta DPM-C530A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur