Dell S3100 Series Manuel utilisateur

Dell Networking S3100 Series

Getting Started Guide

Regulatory Model: S3100

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you

how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

intellectual property laws. Dell™and the Dell logo are trademarks of Dell Inc. in the United States and/or other

jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.

2015 - 10

Rev. A00

About this Guide

This document is intended as a Getting Started Guide to get new systems up and running and ready for

configuration.

For more details about S3100 series installation and software configuration, see the following

information, available on the Dell Networking Support website (http://www.dell.com/support).

• The Dell Networking S3100 Series Installation Guide describes installation and replacement

procedures.

• The Dell Configuration Guide for the S3100 Series describes software configuration.

• The Dell Command Line Reference Guide for the S3100 Series provides command line interface (CLI)

information.

• The Dell Networking S3100 Series Release Notes provide information about upgrading the S3100

series.

About this Guide 3

S3100 Series Hardware Overview

This section contains basic information about the S3100 series, including descriptions of features, I/O and

PSU sides, power supplies, fans, and light emitting diode (LED) status.

Product Description

The S3100 series is a low-cost wireless closet switch/router product for copper connections to 1G

endpoints with Power over Ethernet plus (PoE+) capability on 1G access ports. The series includes

capabilities for 1/10GE switching with 1G copper links for campus network endpoints and 10G ports for

uplinks to core/aggregation switches. Each of the platforms also includes a 20G expansion slot that

supports an optional small form-factor pluggable plus (SFP+) or 10GBase-T module. The series has four

platforms. For the two PoE platforms, you can stack up to six switches to operate as a single unit.

The S3124 platform includes the following features:

• Twenty-four Gigabit Ethernet 10/100/1000BASE-T RJ-45 ports that support auto-negotiation for

speed, flow control, and duplex.

• Two combo SFP ports.

• Two SFP+ 10G ports.

The S3124F platform includes the following features:

• Twenty-four Gigabit Ethernet 100BASEFX/1000BASE-X SFP ports.

• Two 1G copper combo ports.

• Two SFP+ 10G ports.

The S3124P platform includes the following features:

• Twenty-four Gigabit Ethernet 10/100/1000BASE-T RJ-45 ports for copper that support auto-

negotiation for speed, flow control, and duplex.

• Two combo SFP ports.

• Two SFP+ 10G ports.

• Supports PoE+.

• Two fixed mini Serial Attached SCSI (mini-SAS) stacking ports HG[21] to connect up to six switches.

For the S3124, S3124F, and S3124P platforms, the port numbering is as follows:

• Regular ports (I/O side) are numbered one to twenty-four.

• Combo ports (I/O side) are numbered twenty-three and twenty-four.

• SFP+ ports (I/O side) are numbered twenty-five and twenty-six.

• Module ports (PSU side) are numbered twenty-seven and twenty-eight.

• Stacking ports (PSU side) are numbered twenty-nine and thirty.

The S3148P platform includes the following features:

4S3100 Series Hardware Overview

• Forty-eight Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T RJ-45 ports that support auto-

negotiation for speed, flow control, and duplex.

• Two combo SFP ports.

• Two SFP+ 10G ports.

• Supports PoE+.

• Two fixed mini-SAS stacking ports HG[21] to connect up to six switches.

For the S3148P platform, the port numbering is as follows:

• Regular ports (I/O side) are numbered one to forty-eight.

• Combo ports (I/O side) are numbered forty-seven and forty-eight.

• SFP+ ports (I/O side) are numbered forty-nine and fifty.

• Module ports (PSU side) are numbered fifty-one and fifty-two.

• Stacking ports (PSU side) are numbered fifty-three and fifty-four.

All S3100 series platforms have the following features:

• One 20G expansion slot for modules (SFP+ [fiber] or 10GBase-T [copper RJ–45]).

• Front panel out-of-band (OOB) management port.

• External serial RS232 port (RJ–45 type).

• One universal serial bus (USB-A) port.

• Hot-swappable redundant power supply unit (PSU).

• Hot-swappable fan tray.

• Standard 1U chassis high.

NOTE: Dell-qualified SFP+ transceivers are sold separately.

S3124 Platform I/O Side

The S3124 platform input/output (I/O) side (shown in the following illustration) contains twenty-four 1G

copper switch ports. The I/O side also contains a console port, management port, serial bus port, reset

button, two 10G SFP+ ports, and two 1G SFP combo ports.

Figure 1. S3124 I/O Side View

1. Console port.

2. Management port (RJ-45 type).

3. One universal serial bus port (USB Type-A) for storage.

S3100 Series Hardware Overview 5

4. Reset button.

5. Two 10G SFP+ ports.

6. Two 1G SFP combo ports.

7. Twenty-four 1G copper switch ports.

S3124 Platform PSU Side

The S3124 PSU side (shown in the following illustration) includes the power supplies, fan tray, and

stacking ports.

Figure 2. S3124 PSU Side View

1. PSU 1.

2. Module slot.

3. Fan tray.

4. Mini-SAS stacking ports.

5. PSU 2.

NOTE: The S3124 platform does not support stacking with Dell Networking OS 9.8(2.0).

6S3100 Series Hardware Overview

S3124F Platform I/O Side

The S3124F platform I/O side (shown in the following illustration) contains twenty-four 1G fiber switch

ports. The I/O side also contains a console port, management port, serial bus port, reset button, two 10G

SFP+ ports, and two 1G copper combo ports.

Figure 3. S3124F I/O Side View

1. Console port.

2. Management port (RJ-45 type).

3. One universal serial bus port (USB Type-A) for storage.

4. Reset button.

5. Two 10G SFP+ ports.

6. Two 1G copper combo ports.

7. Twenty-four 1G fiber switch ports.

S3124F Platform PSU Side

The S3124F PSU side (shown in the following illustration) includes the power supplies, fan tray, and

stacking ports.

Figure 4. S3124F PSU Side View

1. PSU 1.

S3100 Series Hardware Overview 7

2. Module slot.

3. Fan tray.

4. Mini-SAS stacking ports.

5. PSU 2.

NOTE: The S3124 platform does not support stacking with Dell Networking OS 9.8(2.0).

S3124P Platform I/O Side

The S3124P platform I/O side (shown in the following illustration) contains twenty-four 1G copper switch

ports that include PoE+ function. The I/O side also contains a console port, management port, serial bus

port, reset button, two 10G SFP+ ports, and two 1G SFP combo ports.

Figure 5. S3124P I/O Side View

1. Console port.

2. Management port (RJ-45 type).

3. One universal serial bus port (USB Type-A) for storage.

4. Reset button.

5. Two 10G SFP+ ports.

6. Two 1G SFP combo ports.

7. Twenty-four 1G copper switch ports including PoE+ function.

8S3100 Series Hardware Overview

S3124P Platform PSU Side

The S3124P PSU side (shown in the following illustration) includes the power supplies, fan tray, and

stacking ports.

Figure 6. S3124P PSU Side View

1. PSU 1.

2. Module slot.

3. Fan tray.

4. Mini-SAS stacking ports.

5. PSU 2.

S3148P Platform I/O Side

The S3124P platform I/O side (shown in the following illustration) contains forty-eight 1G copper switch

ports that include PoE+ function. The I/O side also contains a console port, management port, serial bus

port, reset button, two 10G SFP+ ports, and two 1G SFP combo ports.

Figure 7. S3148P I/O Side View

1. Console port.

2. Management port (RJ-45 type).

3. One universal serial bus port (USB Type-A) for storage.

S3100 Series Hardware Overview 9

4. Reset button.

5. Two 10G SFP+ ports.

6. Two 1G SFP combo ports.

7. Forty-eight 1G copper switch ports including PoE+ function.

S3148P Platform PSU Side

The S3148P PSU side (shown in the following illustration) includes the power supplies, fan tray, and

stacking ports.

Figure 8. S3148P PSU Side View

1. PSU 1.

2. Module slot.

3. Fan tray.

4. Mini-SAS stacking ports.

5. PSU 2.

Reset Button

The reset button allows you to perform a hard reset on the switch. The reset button is accessed through

the pinhole on the I/O side of the chassis.

To perform a hard reset of the switch, insert the tip of a paper clip or similar tool into the pinhole. When

the switch completes the boot process after the reset, it resumes operation with the most recently saved

configuration. Any changes made to the running configuration that were not saved to the startup

configuration prior to the reset are lost.

Power Supplies

S3100 systems support two hot-swappable power supply units (PSUs) with integrated fans that provide

cooling for the system. The type of PSU differs by platform.

NOTE: Two PSUs are required for full redundancy, but the systems can operate with a single PSU.

The S3100 systems ship with one PSU. You can purchase a second PSU as a separate purchased

part.

10 S3100 Series Hardware Overview

Autres manuels pour S3100 Series

Table des matières

Autres manuels Dell Changer

Dell

Dell PowerConnect 5224 Manuel utilisateur

Dell

Dell Z9100-ON Manuel utilisateur

Dell

Dell Networking S6000 System Manuel utilisateur

Dell

Dell EMC PowerSwitch S4200-ON Series Manuel utilisateur

Dell

Dell EMC PowerSwitch Z9432F-ON Manuel utilisateur

Dell

Dell PowerConnect B-FCX624 Manuel

Dell

Dell S4048-ON Manuel utilisateur

Dell

Dell Networking N4032 Manuel utilisateur

Dell

Dell 3348 - PowerConnect Switch - Stackable Mode d’emploi

Dell

Dell Force10 MXL Blade Guide de référence rapide

Dell

Dell PowerConnect 3324 Manuel utilisateur

Dell

Dell Networking Z9500 Manuel utilisateur

Dell

Dell 3500 Series Manuel utilisateur

Dell

Dell PowerEdge M IO Aggregator Manuel d'utilisation

Dell

Dell Force10 TeraScale E Series Manuel utilisateur

Dell

Dell Catalyst 3130 Manuel d'utilisation

Dell

Dell Server Console Switch Manuel utilisateur

Dell

Dell PowerConnect 3248 Manuel utilisateur

Dell

Dell POWERCONNECT J SERIES Manuel utilisateur

Dell

Dell N1100-ON Manuel utilisateur

Dell

Dell Force10 Z9000 Manuel utilisateur

Dell

Dell PowerEdge M IO Aggregator Manuel utilisateur

Dell

Dell Networking S5000 Manuel utilisateur

Dell

Dell PC2216 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur