Dell K804N Manuel utilisateur
DelltOnline Rack
External Battery Module
for use with
3750W and 4200W
UPS models
Getting Started With
Your System
Démarrer avec Votre Système
Erste Schritte mit Ihrem System
Начало работы с системой
Introducción de su Sistema
系统使用 入门指南
系統使用 入門指南
사용자 시스템 시작하기
はじめに システムについて
K804N, H952N, J730N, K805N
J739N
www.dell.com | support.dell.com
DelltOnline Rack
External Battery Module
for use with
3750W and 4200W
UPS models
Getting Started
With Your System
K804N, H952N, J730N, K805N
J739N
www.dell.com | support.dell.com
Notes and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your software.
DANGER: A DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING: A WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or
injury.
CAUTION: A CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury or in property damage incidents.
DANGER: Observe the following instruction to help prevent an imminently hazardous situation which, if not
avoided, will result in death or serious injury:
SThis UPS contains LETHAL VOLTAGES. All repairs and service should be performed by
AUTHORIZED SERVICE PERSONNEL ONLY.ThereareNO USER SERVICEABLE PARTS
inside the UPS.
Information in this document is subject to change without notice.
E2009 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their
products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
July 2009
3
Finding Information |
Finding Information
CAUTION: The Safety, Environmental, and Regulatory Information document provides important safety and
regulatory information.
What are You Looking For? Find It Here
SThe user's guide for my UPS
SThe user's guide for the Dell Network Management
Card
SDell UPS Management Software
NOTE: Documentation and software updates can be
found at support.dell.com.
Dell UPS Disc
SSpecifications
SHow to configure UPS settings
SHow to troubleshoot and solve problems
SHow to install REPO control
Dell UPS User's Guide
The user's guide is available on the Dell UPS disc and
on support.dell.com.
SSafety instructions
SRegulatory information
SRecycling information
Safety, Environmental, and Regulatory Information
SWarranty information
STerms and Conditions (U.S. only)
SEnd User License Agreement
Dell Warranty and Support Information
SSupport information Dell Support Website — support.dell.com
NOTE: Select your region or business segment to view
the appropriate support site.
4|Installation and Startup
Installation and Startup
CAUTION: Before performing the procedures in this document, read and follow the safety instructions and
important regulatory information in your Safety, Environmental, and Regulatory Information document.
Unpacking the External Battery Module
1Open the outer carton and remove the accessories packaged with the cabinet.
5
Installation and Startup |
Lifting the Cabinet
CAUTION: The cabinet is heavy (53 kg/116.8 lb). Lifting the cabinets into the rack requires a minimum of two
people.
1Withonepersononeachside,carefullyliftthecabinet out of the outer carton using the handles
on the cardboard and set it on a flat, stable surface.
2Discard or recycle the packaging in a responsible manner, or store it for future use.
6|Installation and Startup
Rackmount Setup
CAUTION: The cabinet is heavy (53 kg/116.8 lb). Lifting the cabinets into the rack requires a minimum of two
people.
Installing the Rails
NOTE: The instructions are the same for square-hole racks and unthreaded, round-hole racks. The rails fit both
rack styles. The round-hole rack is shown in the illustrations.
1Select the proper holes in the rail for positioning the cabinet in the desired location in the rack.
The rails should be located at the bottom of the 3U space allocated for the EBM.
2Position the end of the left and right rails labeled FRONT facing inward.
7
Installation and Startup |
3Attach the rails to the rack:
Engage the back end of the rail until it fully seats on the vertical rack flange and the hook latch
locks in place.
Pull the rail toward the front.
Push the front end of the rail until it fully seats on the vertical rack flange and the hook latch locks
in place.
Installing the Cabinet
NOTE: Install the EBM directly below the UPS.
4Slide the cabinet into the rack.
8|Installation and Startup
Securing the Cabinet
5Secure the front of the cabinet to the rack using the thumbscrews on the mounting brackets.
Tighten by hand; do not use power tools.
Installing the EBM Front Cover
6Install the EBM front cover.
Ce manuel convient aux modèles suivants
4
Table des matières
Langues :
Autres manuels Dell Unité de contrôle
Dell
Dell UPS 2700R Series Manuel utilisateur
Dell
Dell PowerEdge M420 Manuel utilisateur
Dell
Dell PowerConnect W Series Instructions d'utilisation et d'entretien
Dell
Dell PowerEdge M420 Manuel de service
Dell
Dell MXG610s Manuel utilisateur
Dell
Dell PowerEdge FN Manuel utilisateur
Dell
Dell PowerConnect W-6000M3 Manuel utilisateur
Dell
Dell FC SAN Manuel utilisateur
Dell
Dell H955N Manuel utilisateur
Dell
Dell LC-EJ-10GE-10P Manuel utilisateur
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
