Dell PowerEdge C8220X Manuel utilisateur

Dell PowerEdge C8220X

Xeon Phi 5110P/7120P

MIC Card

Installation Guide

Regulatory Model: B06B

Regulatory Type: B06B001

C8220X_MIC5110P7120P_IG.book Page 1 Monday, August 12, 2013 5:42 PM

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of

data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

____________________

Information in this publication is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of Dell Inc.

Intel®, Xeon®, and Intel® Xeon Phi™ are trademarks of Intel Corporation in the U.S. and/or other

countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Regulatory Model B06B

Regulatory Type: B06B001

2013 - 08 P/N X8N2G Rev. A00

C8220X_MIC5110P7120P_IG.book Page 2 Monday, August 12, 2013 5:42 PM

Contents 3

Contents

Important Safety Information . . . . . . . . . . . . . . . . . . . . . 5

Recommended Tools . . . . . . . . . . . . . . . . . . . . . . . . . 5

Information You May Need . . . . . . . . . . . . . . . . . . . . . . 6

Xeon Phi 5110P/7120P MIC Cards . . . . . . . . . . . . . . . . . . 6

Installing the Front Xeon Phi 5110P/7120P MIC card . . . 7

Installing the Back Xeon Phi 5110P/7120P MIC card . . 11

Cable Routing Diagram . . . . . . . . . . . . . . . . . . . . . . . 16

C8220X_MIC5110P7120P_IG.book Page 3 Monday, August 12, 2013 5:42 PM

4Contents

C8220X_MIC5110P7120P_IG.book Page 4 Monday, August 12, 2013 5:42 PM

Installation Guide 5

Important Safety Information

Observe the following safety precautions when installing Intel Xeon Phi 5110P/7120P Many

Integrated Core (MIC) cards in the PowerEdge C8220X sled.

WARNING: Working on systems that are still connected to a power supply can be

extremely dangerous.

CAUTION: The sled must be operated with the cover installed to ensure proper cooling.

CAUTION: To ensure proper airflow in the PowerEdge C8000 server enclosure, if a sled

module is removed it should be immediately replaced with another sled or sled blank.

CAUTION: Operating the system for extended periods of time without a sled blank

installed can cause the PowerEdge C8000 server enclosure to overheat.

CAUTION: MIC cards can only be installed in the slots on the GPGPU card riser. Do not

attempt to install MIC cards directly into the riser connector on the system board.

NOTE: It is recommended that you always use a static mat and static strap while working on

components in the interior of the system.

To avoid injury to yourself or damage to your system, follow these guidelines:

• Always disconnect the system from the power outlet whenever you are working inside the

system.

• If possible, wear a grounded wrist strap when you are working inside the system.

Alternatively, discharge any static electricity by touching the bare metal chassis of the

system case, or the bare metal body of any other grounded appliance.

• Hold electronic circuit boards by the edges only. Do not touch the components on the

board unless it is necessary to do so. Do not flex or stress the circuit board.

• Leave all components inside the static-proof packaging until you are ready to use the

component for the installation.

• Some cables have a connector with locking tabs; if you are disconnecting this type of cable,

press in on the locking tabs before you disconnect the cable. As you pull connectors apart,

keep them evenly aligned to avoid bending any connector pins. Also, before you connect a

cable, ensure that both connectors are correctly oriented and aligned.

Recommended Tools

You may need the following items to install Intel Xeon Phi 5110P/7120P MIC cards in the

PowerEdge C8220X sled.

• #1 or #2 Phillips screwdriver

• Static mat

• Static strap

C8220X_MIC5110P7120P_IG.book Page 5 Monday, August 12, 2013 5:42 PM

6Installation Guide

Information You May Need

For information about system features, troubleshooting, and component replacement, see the

PowerEdge C8220X Hardware Owner’s Manual. This document is available at

dell.com/support/manuals.

Xeon Phi 5110P/7120P MIC Cards

Remove the sled from the PowerEdge C8000 server enclosure. For detailed information on

removing the sled, see the

PowerEdge C8220X Hardware Owner’s Manual

Place the sled on a flat, stable surface.

Open the sled. For detailed information on opening the sled, see the

PowerEdge C8220X

Hardware Owner’s Manual

Remove the five M3 screws securing the top cover.

Lift the top cover away from the sled cover.

NOTE: Be careful not to damage the twin axial cable on the back GPGPU card riser

when removing the top cover.

Figure 1-1. Removing the Top Cover

1 top cover 2 M3 screws (5)

C8220X_MIC5110P7120P_IG.book Page 6 Monday, August 12, 2013 5:42 PM

Installation Guide 7

Installing the Front Xeon Phi 5110P/7120P MIC card

Remove the four M3 screws securing the air baffles.

Lift the air baffles out of the sled cover.

Figure 1-2. Removing the Air Baffles

Remove the four M3 screws securing the mounting brackets.

Lift the mounting brackets away from the GPGPU blank. Save the mounting brackets.

Lift the GPGPU blank out of the sled cover. Save the GPGPU blank for future use.

Figure 1-3. Removing the Mounting Brackets and GPGPU Blank

1M3screws(4) 2right air baffle

3 left air baffle 4 GPGPU blank

1 M3 screws (4) 2 front mounting bracket

3 back mounting bracket 4 GPGPU blank

C8220X_MIC5110P7120P_IG.book Page 7 Monday, August 12, 2013 5:42 PM

8Installation Guide

Align the right air baffle with the screw holes on the front of the sled cover.

Secure the right air baffle to the sled cover using the two M3 screws. Tighten the screws to

5.21 in-lbs.

Figure 1-4. Installing the Right Air Baffle

Remove the four screws securing the MIC card bracket.

Lift the bracket from the MIC card. Save the bracket for future use.

Figure 1-5. Removing the MIC Card Bracket

1 M3 screws (2) 2 right air baffle

1 screws (4) 2 MIC card bracket

3MICcard

C8220X_MIC5110P7120P_IG.book Page 8 Monday, August 12, 2013 5:42 PM

Installation Guide 9

Align the front mounting bracket with the screw holes on the left of the MIC card and secure

with four M3 screws. Tighten the screws to 5.21 in-lbs.

Align the back mounting bracket with the screw holes on the right of the MIC card and

secure with four M3 screws. Tighten the screws to 5.21 in-lbs.

Figure 1-6. Installing the Mounting Brackets

Connect the power cables to the MIC card. Ensure the cables are properly attached. See

Figure 1-19 for the cable routing diagram.

Figure 1-7. Connecting the Power Cables

1 M3 screws (4) 2 front mounting bracket

3 back mounting bracket 4 MIC card

1, 2 power cables

C8220X_MIC5110P7120P_IG.book Page 9 Monday, August 12, 2013 5:42 PM

10 Installation Guide

Align and insert the MIC card assembly into the front GPGPU card riser connector until the

card is fully seated.

Secure the MIC card to the front of the sled cover using the four M3 screws, working in a

clockwise sequence. Tighten the screws to 5.21 in-lbs.

Figure 1-8. Installing the Front MIC Card Assembly

Align the left air baffle with the screw holes on the front of the sled cover.

Secure the left air baffle to the sled cover using the two M3 screws. Tighten the screws to

5.21 in-lbs.

Figure 1-9. Installing the Left Air Baffle

1 M3 screws (4) 2 MIC card assembly

3 front GPGPU card riser

1 left air baffle 2 M3 screws (2)

3 MIC card assembly

C8220X_MIC5110P7120P_IG.book Page 10 Monday, August 12, 2013 5:42 PM

Autres manuels pour PowerEdge C8220X

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dell Matériel informatique

Dell

Dell POWEREDGE RAID H700 Guide de démarrage rapide

Dell

Dell qlogic qla2100 Manuel utilisateur

Dell

Dell OptiPlex HUB Manuel utilisateur

Dell

Dell EMC XC Core XC6520 Manuel

Dell

Dell 2000FP Manuel utilisateur

Dell

Dell Latitude ON Manuel utilisateur

Dell

Dell PowerEdge 1650 Manuel utilisateur

Dell

Dell OptiPlex XE4 Small Form Factor Manuel utilisateur

Dell

Dell PR03X Manuel utilisateur

Dell

Dell Mellanox ConnectX-3 Manuel utilisateur

Dell

Dell Latitude L400 Manuel utilisateur

Dell

Dell Dimension XPS T Series Manuel utilisateur

Dell

Dell Streak 5 Manuel utilisateur

Dell

Dell PowerEdge 1650 Manuel utilisateur

Dell

Dell PowerEdge 64 Series Guide de démarrage rapide

Dell

Dell PowerEdge 800 Manuel utilisateur

Dell

Dell Alienware Graphics Amplifier Manuel utilisateur

Dell

Dell ADVANCED PORT REPLICATOR Manuel utilisateur

Dell

Dell PowerVault 770N Manuel technique

Dell

Dell Dimension 4600 Series Manuel utilisateur

Dell

Dell PowerEdge S130 Manuel utilisateur

Dell

Dell A2463645 - 2 GB Memory Mode d’emploi

Dell

Dell PowerConnect W-7200 Series Manuel utilisateur

Dell

Dell Embedded Box PC 5000 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur