Danfoss RET1000 B Manuel utilisateur

RET1000 B/M/MS

Electronic dial setting thermostat

User Guide

Danfoss Heating

RET1000

For a large print version of these instructions

please call Marketing on 0845 121 7400.

Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other

printed material. All trademarks in this material are property of the respective companies.

Danfoss Heating 3

Thank you for buying a Danfoss product

Vielen Dank für den Kauf eines Produkts von Danfoss

Tak, fordi du valgte et produkt fra Danfoss

Le agradecemos que haya comprado un producto de

Danfoss

Merci d’avoir choisi un produit Danfoss

Hartelijk dank voor de aanschaf van een Danfoss-product

     Danfoss

Br Danfoss ürünü satın aldığınız çn teşekkür ederz

RET1000

What is a room thermostat?

... an explanation for householders. A room thermostat simply switches

the heating system on and o as necessary. It works by sensing the

air temperature, switching on the heating when the air temperature

falls below the thermostat setting, and switching it o once this set

temperature has been reached.

Turning a room thermostat to a higher setting will not make the

room heat up any faster. How quickly the room heats up depends on

the design of the heating system, for example, the size of boiler and

radiators.

Neither does the setting aect how quickly the room cools down.

Turning a room thermostat to a lower setting will result in the room

being controlled at a lower temperature, and saves energy.

Danfoss Heating 5

The heating system will not work if a timeswitch or programmer has

switched it o.

The way to set and use your room thermostat is to nd the lowest

temperature setting that you are comfortable with, and then leave it

alone to do its job.The best way to do this is to set the room thermostat

to a low temperature – say 18°C – and then turn it up by one degree

each day until you are comfortable with the temperature. You won’t

have to adjust the thermostat further. Any adjustment above this

setting will waste energy and cost you more money.

If your heating system is a boiler with radiators, there will usually

be only one room thermostat to control the whole house. But you

can have dierent temperatures in individual rooms by installing

thermostatic radiator valves (TRVs) on individual radiators. If you don’t

haveTRVs, you should choose a temperature that is reasonable for the

whole house. If you do have TRVs, you can choose a slightly higher

setting to make sure that even the coldest room is comfortable, then

prevent any overheating in other rooms by adjusting the TRVs.

Room thermostats need a free ow of air to sense the temperature,

so they must not be covered by curtains or blocked by furniture.

Nearby electric res, televisions, wall or table lamps may prevent the

thermostat from working properly.

RET1000

LED Indicators

Power On – Green (bottom right)

Thermostat output on – Red (top left)

(RET1000B only - to conserve battery power the LEDs will

illuminate for 5 seconds after the dial is moved depending on

status. In normal conditions the thermostat remains operational.

When the battery is low the Power On LED will ash every

minute, replace batteries as soon as possible to maintain control

of the heating).

Setting the temperature

Turn setting dial to required temperature.

For best comfort control initially set the dial to a lower

temperature than desired, say 18°C. Then turn it up by one

degree each day until a comfortable temperature is reached.

Danfoss Heating 7

Low Battery Indications (RET1000B)

For battery powered thermostat (RET1000B) when the batteries

require replacement the power LED will ash once per minute.

Batteries should be replaced within 15 days, after which the

thermostat will turn o the load it is controlling. If the power

LED does not illuminate when the dial is turned the batteries

may have expired and should be replaced immediately to avoid

damage to the thermostat.

RET1000

LED-Anzeigen

Einschalten (Power On) – Grün (unten rechts)

Thermostatregler einschalten (Thermostat Output on) – Rot

(oben links)

(Nur RET1000B – Um Energie zu sparen, leuchten die LED

5Sekunden lang nach der Änderung der Einstellung, je nach

Status. Bei Normalbetrieb bleibt der Thermostat weiterhin

funktionsfähig. Wenn die Batterien schwach werden, blinkt die

Power On LED einmal pro Minute auf. Ersetzen Sie die Batterien

so schnell wie möglich, um die Steuerung des Heizsystems nicht

zu beeinträchtigen.)

Einstellen der Temperatur

Drehen Sie den Regler auf die gewünschte Temperatur.

Für einen optimalen Komfort empfehlen wir Ihnen, die Tempe-

ratur zu Beginn auf eine niedrigere Temperatur einzustellen, z.

B. 18 °C. Erhöhen Sie diese dann um ein Grad pro Tag, bis die

Räume eine angenehme Temperatur haben.

Danfoss Heating 9

Anzeige Batterieladezustand niedrig (RET1000B)

Bei einem batteriebetriebenen Thermostat (RET1000B) blinkt

die Power On LED-Anzeige einmal pro Minute auf, wenn die

Batterien ersetzt werden müssen. Die Batterien sollten innerhalb

von 15Tagen ersetzt werden, danach stellt der Thermostat die

von ihm geregelten Einstellungen ab. Wenn die Power On LED

beim Drehen des Reglers nicht aueuchtet, sind die Batterien

möglicherweise leer und müssen umgehend ersetzt werden,

um Schäden am Thermostat zu vermeiden.

RET1000

LED-indikatorer

On - grøn lampe (nederst til højre)

Termostatudgang til - rød lampe (øverst til venstre)

(Kun RET1000B - for at bevare strømmen på batteriet lyser

LED’erne op i 5 minutter, når drejehjulet er yttet, afhængigt

af status. Under normale forhold forbliver termostaten i

driftstilstand. Hvis batteriet er lavt, blinker LED-lampen for

Tændt hvert minut. Udskift batterierne hurtigst muligt for at

bevare kontrollen med varmen).

Temperaturindstilling

Drej indstillingshjulet til den påkrævede temperatur.

For at opnå den bedste komfort indstilles drejehjulet først til

en lavere temperatur end den ønskede, eksempelvis 18 °C.

Herefter hæves temperaturen med en enkelt grad hver dag,

indtil man nder det optimale niveau.

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Danfoss Thermostat

Danfoss

Danfoss GreenCon RC-T2 Manuel utilisateur

Danfoss

Danfoss Icon Master Manuel utilisateur

Danfoss

Danfoss RET-B Manuel utilisateur

Danfoss

Danfoss WT-DR Manuel utilisateur

Danfoss

Danfoss RET2001 Manuel utilisateur

Danfoss

Danfoss HC6000 Manuel utilisateur

Danfoss

Danfoss RT 101 Manuel utilisateur

Danfoss

Danfoss RET2000 B Manuel utilisateur

Danfoss

Danfoss DEVIreg 132 Manuel utilisateur

Danfoss

Danfoss MBC 8000 Manuel utilisateur

Danfoss

Danfoss RT51 Manuel utilisateur

Danfoss

Danfoss LX205T Manuel utilisateur

Danfoss

Danfoss EFET 130 Manuel utilisateur

Danfoss

Danfoss ECL Comfort 210 Manuel utilisateur

Danfoss

Danfoss RT 270 Manuel utilisateur

Danfoss

Danfoss FHV-R Manuel utilisateur

Danfoss

Danfoss ECL Comfort 310, A333 Manuel utilisateur

Danfoss

Danfoss SET 3E Manuel utilisateur

Danfoss

Danfoss DEVI DEVIreg 532 Manuel utilisateur

Danfoss

Danfoss CF-RF Manuel utilisateur

Danfoss

Danfoss RESD Series Manuel utilisateur

Danfoss

Danfoss KPU 19 Manuel utilisateur

Danfoss

Danfoss RET 230 HCW-3 Manuel utilisateur

Danfoss

Danfoss TP5001 series Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur