Daikin BRC52B61 Manuel utilisateur
OPERATING
MANUAL
OM-BRC52B-0617(2)-DAIKIN USA
Part No.: R08019046595B
English
Operating Manual
Handset Wireless
Français
Español
Mode D’emploi
Combiné sans fil
Manual De Instrucciones
Auricular Inalámbrico
OM-BRC52B-0617(2)-DAIKIN USA.indb 1OM-BRC52B-0617(2)-DAIKIN USA.indb 1 10/30/2017 3:47:03 PM10/30/2017 3:47:03 PM
OM-BRC52B-0617(2)-DAIKIN USA.indb 2OM-BRC52B-0617(2)-DAIKIN USA.indb 2 10/30/2017 3:47:03 PM10/30/2017 3:47:03 PM
i
BRC52B61/62/63/64/65 Remote Controller Indication /
Indication De Télécommande BRC52B61/62/63/64/65 /
Indicación Del Mando A Distancia BRC52B61/62/63/64/65
SWING
TIMER
LED
CANCEL CLOCK CANCEL
OFF
ECO+
ON
ON/OFF
SLEEP
TEMP
1
2
13
6
12
5
14
8
10
3
7
4
9
15
11
MODE
FAN
POWERFUL
QUIET
OM-BRC52B-0617(2)-DAIKIN USA.indb 3OM-BRC52B-0617(2)-DAIKIN USA.indb 3 10/30/2017 3:47:03 PM10/30/2017 3:47:03 PM
ii
HOW TO MOUNT ONTO THE WALL /
COMMENT INSTALLER SUR LE MUR /
MONTAJE SOBRE LA PARED
SWING
TIMER
LED
CANCEL CLOCK CANCEL
OFF
ECO+
ON
ON/OFF
SLEEP
TEMP
SWING
TIMER
LED
CANCEL CLOCK CANCEL
OFF
ECO+
ON
ON/OFF
SLEEP
TEMP
MODE
FAN
POWERFUL
QUIET MODE
FAN
POWERFUL
QUIET
TO INSERT BATTERIES (AAA.R03) /
INTRODUIRE LES PILES (AAA.R03) /
INSERTE LAS PILAS (AAA.R03)
OM-BRC52B-0617(2)-DAIKIN USA.indb 4OM-BRC52B-0617(2)-DAIKIN USA.indb 4 10/30/2017 3:47:03 PM10/30/2017 3:47:03 PM
iii
REMOTE CONTROLLER LOSS PREVENTION WITH BALL
CHAIN (OPTIONAL) / PRÉVENTION CONTRE LA PERTE
DE LA TÉLÉCOMMANDE PAR CHAÎNETTE À BOULES
(FACULTATIF) / PREVENCIÓN DE PÉRDIDA DEL CONTROL
REMOTO CON CADENA DE BOLAS (OPCIONAL)
Cadena de bolas (350mm)
Remote controller
Télécommande
Control Remoto
Ball chain (350mm)
Chaînette à boules (350 mm)
Screw
Vis
Tornillo
Wall attachment screw
Vis de fixation murale
Tornillo de instalación en pared
Holder Support
Soutien de détenteur
Apoyo Holder
OM-BRC52B-0617(2)-DAIKIN USA.indb 5OM-BRC52B-0617(2)-DAIKIN USA.indb 5 10/30/2017 3:47:04 PM10/30/2017 3:47:04 PM
iv
Installation
1. Match the ring at the end of the ball chain
with the screw hole on the back of the
remote controller and secure it with the
screw.
2. Attach the holder and the ball chain as
above at the position where signals from
the remote controller can be received
easily.
3. Pass the ball chain through the back of the
holder and match the ring at the end of the
ball chain to the upper hole of the holder.
Fix the holder to the wall by putting
through 2 screws across it.
Installation
1. Faites correspondre l’anneau de l’extrémité
de la chaînette à boules avec le trou de vis
situé au dos de la télécommande et fi xez-le
à l’aide de la vis.
2. Fixez le support et la chaînette à boules
comme ci-dessus, dans une position
permettant une réception facile des signaux
de la télécommande.
3. Passez la chaînette à boules à l’arrière du
support et faites correspondre l’anneau de
l’extrémité de la chaînette à boules avec le
trou supérieur du support. Fixez le support
au mur à l’aide de 2 vis.
Instalación
1. Una el anillo del fi nal de la cadena de
bolas con el agujero del tornillo de la parte
trasera del control remoto y fíjelo con el
tornillo.
2. Coloque el soporte y la cadena de bolas,
como indica la imagen superior, en una
posición en que las señales del control
remoto se puedan recibir con facilidad.
3. Pase la cadena de bolas por la parte trasera
del soporte y una el anillo del fi nal de la
cadena de bolas con el agujero superior
del soporte. Fije el soporte en la pared
colocando 2 tornillos a través del soporte.
OM-BRC52B-0617(2)-DAIKIN USA.indb 6OM-BRC52B-0617(2)-DAIKIN USA.indb 6 10/30/2017 3:47:04 PM10/30/2017 3:47:04 PM
ENGLISH
1-1
Original Instruction
1. Transmission source
• The source where the signal will be transmitted.
2. Signal transmission indication
• Blink to confi rm that the last setting has been transmitted to the unit.
3. “ON/OFF” Button
• Press once to start the air conditioner unit.
• Press again to stop the unit.
4. Fan speed selection
• Pressing the button continuously will toggle the fan speed in the following order:
Low Med High Auto
• Stop pressing when the desired fan speed appears on the display screen.
5. Operation mode
• Press the MODE button to select the type of operating mode.
• For cooling only unit, the available modes are: COOL ( ), DRY ( ) and FAN ( ).
• For heat pump unit, the available modes are: AUTO ( ), COOL ( ), DRY ( ),
FAN ( ) and HEAT ( ).
• The AUTO ( ) mode is unavailable for chilled water system except 4-pipe system.
6. Automatic air swing
• Press the SWING button to activate the automatic air swing function.
• To distribute the air to a specifi c direction, press the SWING button and wait until the louver
move to the desired direction and press the button once again.
7. Powerful function
• Press the button for fast cooling or heating operation.
• Fan speed turn to maximum speed.
• Press again for smart cooling or heating operation.
• Fan speed turn to maximum speed and louver will be adjusted as according to the judgement of
sense function.
• Press again to deactivate the function.
• Available under HEAT and COOL modes only.
• Any change of fan speed will deactivate this function.
8. OFF timer setting
• Press the OFF TIMER button will activate the off timer function.
• Set the desired off time by pressing the OFF TIMER button continuously.
• Press the CANCEL button to cancel the off timer setting.
9. Quiet function
• Press the button for quiet operation.
• Fan speed turn to minimum speed.
• Press again to deactivate the function.
• Available under HEAT and COOL modes only.
• Any change of fan speed will deactivate this function.
OPERATING GUIDE
OM-BRC52B-0617(2)-DAIKIN USA.indb 1OM-BRC52B-0617(2)-DAIKIN USA.indb 1 10/30/2017 3:47:04 PM10/30/2017 3:47:04 PM
1-2
10. Clock time setting
• Press and hold CLOCK button to set the clock time.
11. ON timer setting
• Press the ON TIMER button will activate the on timer function.
• Set the desired on time by pressing the ON TIMER button continuously. If the timer is set to
7.30am, the air conditioner will turn on at 7.30am sharp.
• Press the CANCEL button to cancel the on timer setting.
12. Sleep mode setting
• Press the button will activate the sleep mode function.
• This is an energy saving option. When the unit is operating under cooling mode, the set temperature
is increased by 0.9°F (0.5°C) after the fi rst half an hour, another 0.9°F (0.5°C) after the second half
an hour and 1.8°F (1°C) after the following 1 hour.
13. Temperature setting
• To set the desired room temperature, press the or button to increase or decrease the set
temperature.
• The temperature setting range is from 60.8°F (16°C) to 86.0°F (30°C)
(Optional setting 68.0°F (20°C) to 86.0°F (30°C)).
• Press both buttons and simultaneously to toggle from °C to °F setting.
14. ECO+ function
• Press the button for eco-friendly mode cooling or heating operation.
• Set temperature automatically adjust to eco-friendly level.
• Press again to deactivate the function.
• Available under HEAT and COOL modes only.
15. LED function
• Press the button to turn on/off the light on ceiling cassette unit.
• Continuosly press the button for 5 seconds to turn on/off the LED display on wall mounted unit.
• Available under HEAT, COOL, DRY, FAN and AUTO modes only.
• When the unit is operating under heating
mode, the set temperature is decreased
by 1.8°F (1°C) after the fi rst half an hour,
another 1.8°F (1°C) after the second half
an hour and 1.8°F (1°C) after the following
1 hour.
• This function is available under COOL,
HEAT and AUTO mode.
+ 3.6 F/2 C
+ 1.8 F/1 C
0 0.5 1 1.5 2
- 1.8 F/1 C
- 3.6 F/2 C
- 5.4 F/3 C
OM-BRC52B-0617(2)-DAIKIN USA.indb 2OM-BRC52B-0617(2)-DAIKIN USA.indb 2 10/30/2017 3:47:04 PM10/30/2017 3:47:04 PM
ENGLISH
1-3
FAULT DIAGNOSIS BY REMOTE CONTROLLER
The temperature display sections indicate corresponding codes.
1. When the ON TIMER CANCEL button or OFF TIMER CANCEL button is held down for 5
seconds, a “ ” indication flashes on the temperature display section.
SWING
TIMER
LED
CANCEL CLOCK CANCEL
OFF
ECO+
ON
ON/OFF
MODE
FAN
SLEEP
POWERFUL
TEMP
QUIET
ON TIMER CANCEL OFF TIMER CANCEL
2. Press the ON TIMER CANCEL button or OFF TIMER CANCEL button repeatedly until a
continuous beep is produced.
• The code indication changes as shown below, and notifi es with a long beep.
ERROR CODE MEANING
00 NORMAL
A1 INDOOR PCB ERROR
A3 DRAIN PUMP ABNORMAL
A5 ANTIFREEZE (COOLING)/HEAT EXCHANGER OVERHEAT (HEATING)
A6 INDOOR FAN MOTOR ABNORMAL
AH ELECTRICAL AIR CLEANER ABNORMAL
C4 INDOOR HEAT EXCHANGER (1) THERMISTOR SHORT/OPEN
C5 INDOOR HEAT EXCHANGER (2) THERMISTOR SHORT/OPEN
C7 LOUVER LIMIT SWITCH ERROR
C9 INDOOR ROOM THERMISTOR SHORT/OPEN
E1 OUTDOOR PCB ERROR
E3 HIGH PRESSURE PROTECTION
E4 LOW PRESSURE PROTECTION
E5 COMPRESSOR MOTOR LOCK/COMPRESSOR OVERLOADED
E6 COMPRESSOR START-UP ERROR
E7 OUTDOOR DC FAN MOTOR LOCK
E8 AC INPUT OVER CURRENT
E9 EXV ERROR
EA 4 WAY VALVE ERROR
F3 DISCHARGE PIPE OVERHEAT
F6 HEAT EXCHANGER OVERHEAT
HO COMPRESSOR SENSOR SYSTEM ERROR
H3 HIGH PRESSURE SWITCH ERROR
H6 COMPRESSOR FEEDBACK DETECTION ERROR
H7 FAN MOTOR OVERLOADED/OVERCURRENT/SENSOR ABNORMAL
H8 AC CURRENT SENSOR ERROR
FAULT DIAGNOSIS (For Inverter only)
OM-BRC52B-0617(2)-DAIKIN USA.indb 3OM-BRC52B-0617(2)-DAIKIN USA.indb 3 10/30/2017 3:47:05 PM10/30/2017 3:47:05 PM
1-4
ERROR CODE MEANING
H9 OUTDOOR AIR THERMISTOR SHORT/OPEN
J1 PRESSURE SENSOR ERROR
J3 COMPRESSOR DISCHARGE PIPE THERMISTOR SHORT/OPEN/MISPLACED
J5 SUCTION PIPE THERMISTOR SHORT/OPEN
J6 OUTDOOR HEAT EXCHANGER THERMISTOR SHORT/OPEN
J7 SUBCOOLING HEAT EXCHANGER THERMISTOR SHORT/OPEN
J8 LIQUID PIPE THERMISTOR SHORT/OPEN
J9 GAS PIPE THERMISTOR SHORT/OPEN
L1 INVERTER OUTDOOR PCB ERROR
L3 OUTDOOR CONTROL BOX OVERHEAT
L4 HEAT SINK OVERHEAT
L5 IPM ERROR/IGBT ERROR
L8 INVERTER COMPRESSOR OVERCURRENT
L9 COMPRESSOR OVERCURRENT PREVENTION
LC COMMUNICATION ERROR (OUTDOOR CONTROL PCB AND INVERTER PCB)
P1 OPEN PHASE OR VOLTAGE UNBALANCE
P4 HEAT SINK THERMISTOR SHORT/OPEN
PJ CAPACITY SETTING ERROR
U0 INSUFFICIENT GAS
U2 DC VOLTAGE OUT OF RANGE
U4 COMMUNICATION ERROR
U7 COMMUNICATION ERROR (OUTDOOR CONTROL PCB AND IPM PCB)
UA INSTALLATION ERROR
UF PIPING & WIRING INSTALLATION MISMATCH/WRONG WIRING/INSUFFICIENT
GAS
UH ANTIFREEZE (OTHER ROOMS)
NOTE
1. A short beep and two consecutive beeps indicate non-corresponding codes.
2. To cancel the code display, hold the ON TIMER CANCEL button or OFF TIMER CANCEL button down for 5
seconds. The code display also cancel itself if the button is not pressed for 1 minute.
OM-BRC52B-0617(2)-DAIKIN USA.indb 4OM-BRC52B-0617(2)-DAIKIN USA.indb 4 10/30/2017 3:47:05 PM10/30/2017 3:47:05 PM
Autres manuels pour BRC52B61
2
Ce manuel convient aux modèles suivants
4
Table des matières
Langues :
Autres manuels Daikin Télécommande
Daikin
Daikin WRC-COA Manuel utilisateur
Daikin
Daikin ARC423A17 Manuel utilisateur
Daikin
Daikin Madoka Manuel utilisateur
Daikin
Daikin BRC1E62 Manuel utilisateur
Daikin
Daikin BRC1H81W Guide de l'utilisateur
Daikin
Daikin ARC433A Series Manuel utilisateur
Daikin
Daikin BRC1D528 Manuel utilisateur
Daikin
Daikin 4PW71247-1-KAD Manuel utilisateur
Daikin
Daikin BRC315D7 Manuel utilisateur
Daikin
Daikin BRC1E53 Comment utiliser
Daikin
Daikin BRC1D71 Manuel utilisateur
Daikin
Daikin VRVWII RWEYQ10MY1 Manuel utilisateur
Daikin
Daikin BRC7C510W Manuel utilisateur
Daikin
Daikin BRCW901A03 Manuel
Daikin
Daikin FTXN-L9 Manuel utilisateur
Daikin
Daikin BRC944A2B Manuel utilisateur
Daikin
Daikin ARC433A51 Manuel d'instructions
Daikin
Daikin BRC7EA530W Manuel utilisateur
Daikin
Daikin Siesta ARCWLA Manuel utilisateur
Daikin
Daikin BRC7EA631 Manuel utilisateur
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
