D-Link DUB-H7 - Hub - USB Manuel utilisateur

This product can be used with the

following operating systems:

Windows XP, Me, 2000, 98SE,

Mac OS 10.1 and above

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

Before You Begin

You must have at least the following:

•Pentium 233-MHz or faster with 32MB RAM

•Available USB 1.1 Port For USB 1.1 Operation

•Available USB 2.0 Port For USB 2.0 Operation

•Windows XP, 2000, Me, 98SE, Mac OS 10.1 and above

• DUB-H7 7-Port Hi-Speed USB 2.0 Hub

• USB 2.0 Cable

• Power Adapter

(5V 3A)

Using a power supply with a different voltage rating will

damage and void the warranty for this product.

7-Port High Speed7-Port High Speed

7-Port High Speed

USB 2.0 HubUSB 2.0 Hub

USB 2.0 Hub

DUB-H7DUB-H7

DUB-H7

Installing the DUB-H7

Plug the USB type B connector (the

smaller end of the cable) into the back

of the DUB-H7.

Plug the AC adapter into the receptor

located on the back panel of the DUB-

H7, then plug the other end into a power

strip or wall outlet.

Plug the USB type A connector (the

flatter, narrow end of the cable) into an

available USB 2.0 port on your

computer (or USB 1.1 if you don’t have

USB 2.0).

Type B

Type A

Your computer will automatically detect and install the DUB-H7.

Your installation is now complete! You may now connect USB

2.0 or USB 1.1 devices to an available USB port on the front of

the DUB-H7.

Type A

LEDIndicatorDescription

The DUB-H7 features eight LED indicators.

•The Power LED indicator is green and lights up when the DUB-H7 is powered on by

using the external power adapter. The DUB-H7 does not run on power supplied from the

computer (bus powered).

•The downstream LED indicators are green and light up when the DUB-H7 is plugged into

the host computer. Each port has one status LED. The LEDs light up to indicate that

port is working.

•When connecting USB cables between USB devices and the DUB-H7, make sure that

the cables are connected securely.

•Remember that when connecting USB 1.1 devices to a USB 2.0 hub or host adapter, the

USB 1.1 device will operate only at USB 1.1 speed.

•The DUB-H7 does not have an on/off switch. It is always on, once the external power

adapter has been plugged into a wall socket or power source.

•Connecting USB 1.1 devices to the DUB-H7 may cause all USB devices connected to

the hub to work at USB 1.1 speed. To ensure 480Mbps throughput for your USB 2.0

devices, do not connect USB 1.1 and USB 2.0 devices to the hub at the same time.

•While using a USB device that includes anAC power adapter, use the included power

adapter to ensure proper power and current supply to that device.

•Please remember to unplug the DUB-H7 properly to ensure that no data loss or corrup-

tion takes place with your operating system.

Tips

Note : If a port becomes overloaded, a “current exceeded” event will take place. The LED

of the port will turn off and the message “USB HUB Current Limit Exceeded” appears on

the monitor. Reset the DUB-H7 by disconnecting it for 5 seconds and then powering it

back on by connecting the AC power adapter.

Power LED

Indicator

Ports 1-7

LED

Indicators

Technical Support

You can find the most recent software and user

documentation on the D-Link website.

D-Link provides free technical support for customers

within the United States for the duration of the warranty

period on this product.

U.S. customers can contact D-Link technical support

through our web site or by phone.

D-Link Technical Support over the Telephone:

(877) 45D-LINK

(877) 453-5465

24 hours a day, seven days a week

D-Link Technical Support over the Internet:

http://support.dlink.com

email: [email protected]

their respective holders. Software and specifications subject to change without notice. DUB-H7.02212003

Autres manuels pour DUB-H7 - Hub - USB

Autres manuels D-Link Changer

D-Link

D-Link DGS-1010MP Manuel utilisateur

D-Link

D-Link EasySmart DXS-1100-16TC Manuel utilisateur

D-Link

D-Link EasySmart DGS-1100-08P Manuel utilisateur

D-Link

D-Link GO-SW-5E Manuel d'installation et d'exploitation

D-Link

D-Link xStack DES-3800 Series Manuel utilisateur

D-Link

D-Link DKVM-8E Manuel utilisateur

D-Link

D-Link DGS-3100 SERIES Manuel utilisateur

D-Link

D-Link DUB-M520 Manuel utilisateur

D-Link

D-Link GO-SW-5G Manuel utilisateur

D-Link

D-Link DES-5600 Manuel utilisateur

D-Link

D-Link DMS-107/E Manuel utilisateur

D-Link

D-Link DGS-1210-52MP Manuel utilisateur

D-Link

D-Link DGS-3312SR Manuel utilisateur

D-Link

D-Link DES-F1026P-E Manuel utilisateur

D-Link

D-Link xStack DGS-3324SRi Manuel utilisateur

D-Link

D-Link Web Smart Switch DGS-1210-28 Manuel utilisateur

D-Link

D-Link DGS-1005D - Switch Manuel utilisateur

D-Link

D-Link DQS-5000-32S Manuel utilisateur

D-Link

D-Link DGS-8010 Manuel utilisateur

D-Link

D-Link DES-1024D Manuel utilisateur

D-Link

D-Link Dis-200G Series Mode d’emploi

D-Link

D-Link DKVM-16 - KVM Switch Manuel utilisateur

D-Link

D-Link DSS-100E-9P Manuel utilisateur

D-Link

D-Link DGS-3130-30PS Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur