D-Link DKVM-16 - KVM Switch Manuel utilisateur
Manual
Building Networks for People
08/26/03
D-Link DKVM-16
16-Port Keyboard, Video,
and Mouse Switch
Version 1.2
2
Contents
PackageContents ................................................................................3
Introduction............................................................................................4
Features andBenefits ...........................................................................5
HardwareInstallation .............................................................................6
Usingthe DKVM-16 ............................................................................12
Daisy-Chainingthe DKVM-16 .............................................................16
HotPlug ..............................................................................................17
Troubleshooting...................................................................................21
Specifications .....................................................................................25
WarrantyandRegistration ...................................................................26
ContactingTechnicalSupport ..............................................................29
3
Package Contents
System Requirements:
!
!
!
!
Console
Computer One VGA, SVGA, or Multisync monitor
One PS/2 mouse or serial (DB-9) mouse port
One PS/2 keyboard orAT (5-pin DIN) keyboard port
One VGA, SVGA, or Multisync video card or port
One PS/2 (6-pin mini-DIN)
One PS/2 (6-pin mini-DIN)
!
!
!
Contents of Package:
D-Link DKVM-16 16-Port Keyboard, Video, and Mouse
Switch
1 DC12V, 1APowerAdapter
3 sets of 3 in1 KVM Cable Kits
(1 set: 3 ft. 3-in-1 Cable Kit to daisy chain, 2 sets: 6 ft. 3 in 1
Cable to PC)
2 DB-9 to 6-pin Mini-DIN Mouse Converters
2 DIN 5-pin to 6-pin Mini-DIN Keyboard Converters
Manual
2 Rack Mount Brackets
8 Screws
If any of the above items are missing, please contact your reseller.
!
!
!
!
!
!
4
Introduction
The D-Link DKVM-16 is a Keyboard, Video and Mouse KVM switch that
allows you to control up to 16 server computers using one keyboard, mouse,
and monitor. It is easy to use, powerful, and scalable. Each DKVM-16 port
has a dedicated microprocessor to intelligently manage port traffic and
allows simultaneous boot-ups for all attached PCs. The advanced
microprocessor technology also saves CAPSLOCK, NUMLOCK, and
SCROLL LOCK status for each PC. Two control buttons located on the front
panel give you one touch access to your attached PCs and the user-friendly
on-screen display menu allows you to configure your DKVM-16 switch’s
settings. The daisy chain port allows up to 8 DKVM-16 KVM switches to be
stacked together for controlling as many as 128 computers. Featuring hot-
plug, auto-scan, keyboard hot keys and audible feedback, the DKVM-16
makes it simple to manage all of your server computers.
The DKVM-16 supports VGA, SVGA, and MultiSync monitors at up to 1920 X
1440 resolution. Integrated mouse conversion technology allows olderAT
type computers with serial mouse ports to be connected to the DKVM-16
using the included serial-to-PS/2 mouse converter. BothAT and PS/2 type
keyboards are also supported, as well as the most popular mice, including
Microsoft®IntelliMouse® and Microsoft® IntelliMouse Explorer®.
5
Features and Benefits
**
Allows users to control sixteen computers from one keyboard, mouse,
and monitor
No software is required; each channel has a dedicated microprocessor
to intelligently manage the boot-up process for all your attached PCs
Daisy-chain ports allow control over as many as 128 computers through
8 banks of DKVM-16 units
Hot Plug provides the ability to add PCs or remove connected PCs for
maintenance without powering down the KVM Switch or PCs
Auto detection of daisy-chain bank eliminates the need for DIP-switches
On-Screen Display menu gives the user a visual interface to name and
select computers
Supports eight character password protection
Convenient On-Screen Display, push button, and keyboard Hot Key
commands for switching between PCs
AutoScan mode
Audible feedback when switching
Automatically recalls CAPS LOCK, NUM LOCK and SCROLL LOCK key
status for each computer
Supports VGA, SVGA and MultiSync monitors
Supports up to 1920 x 1440 resolution at 200MHz Bandwidth
Integrated mouse conversion technology allows connection of AT type
computers that have serial mouse ports
Microsoft®IntelliMouse®, Microsoft Intellimouse Explorer support and
emulation
Keyboard and mouse emulation for error-free boot ups
Supports both AT and PS/2 type keyboards (AT requires AT - PS/2
adapter included)
!
Uses standard KVM cables
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
6
Hardware Installation
Front Panel Layout
Rear Panel Layout
CurrentActive Bank Display CurrentActive Port Display
Bank Select Port Select Power Switch
VGASignal PS/2 Mouse
Daisy-Chain In Port PC Port Connectors
PS/2 Keyboard PS/2 Mouse
Console Port
VGAMonitorConnector
Output Output Input Input
PS/2 Keyboard
Input
(Daisy-Chain Out)
7
Hardware Installation(Continued)
Find a convenient place to place your DKVM-16. Its 19" rack mount form fac-
tor makes it mountable on a 19" rack. When mounting to a rack, attach the
included brackets to the side panels of the DKVM-16. Take note of the length
ofyour cablesso thatyour computers, DKVM-16,keyboard, mouse, and moni-
tor are distanced properly.
Connect the monitor console to the DKVM-16. Connect the attached cable, or
the one included with your monitor, to the HD DB-15 female port, labeled with
the monitor symbol at the CONSOLE connector on the back of the DKVM-16.
Step 1
Step 2
WARNING
Make sure that all of your computers are powered off before attempting to
connect the cabling to avoid damage to your DKVM-16
8
Hardware Installation(Continued)
Connect the keyboard console to the DKVM-16. If you have an AT type key-
board, you will need anAT to PS/2 adapter.
Connect the mouse console to the DKVM-16. If you have an older mouse with
9 pins, you will need to use the 9 to 5 pin mouse converter that is included with
the DKVM-16.
Step 3
Step 4
9
Hardware Installation(Continued)
Step 5
Step 6
Connect one end of the included VGA cable (15-pin HDDB Male / Male) to the
female connectors on the back of the PC. Connect the other end of the cable to
the rear panel of the DKVM-16. This step can be repeated for all PCs.
Back of PC
Using the included 3-in-1 cable, locate the mouse connector (green) and con-
nect one end to the PS/2 mouse port on the back panel of the computer, and
the other end to the PC1 PS/2 mouse port on the back panel of the DKVM-16.
If there are not enough PS/2 ports on the computer, you can choose a serial
port for the mouse connection. Be sure to add a serial to PS/2 converter in-
cluded with the DKVM-16 before connecting the 3-in-1 cable to the computer.
Back of PC
10
Hardware Installation(Continued)
Step 7
Using the included 3-in-1 cable, locate the keyboard connector (purple) and
connect one end to the PS/2 keyboard port on the back panel of the computer,
and the other end to the PC1 PS/2 keyboard port on the back panel of the
DKVM-16. If your computer has anATtype keyboard port, you will need to use
the PS/2 toAT keyboard adapter included with the DKVM-16.
Back of PC
Step 8
Double-check all of your connections. Make sure that the keyboard and mouse
cables are connected to the correct ports.
Step 9
Repeat steps 5 through 8 for the remainder of the computers.
Step 10
Attach the power supply to the DKVM-16 unit and plug the other end into an
electrical receptacle. When you see the LED for Port 1 light up and hear a
beep, switch on your PCs and monitor.
Note: To maintain stable operation of the DKVM-16, please keep the unit powered
using the power adapter when in use, especially when the DKVM-16 is in a daisy-
chain stack.
Autres manuels pour DKVM-16 - KVM Switch
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels D-Link Changer
D-Link
D-Link xStack DGS-3610 Series Manuel
D-Link
D-Link DGS-1024C Manuel utilisateur
D-Link
D-Link DQS-5000-54SQ28 Manuel utilisateur
D-Link
D-Link DGS-1008TL Manuel utilisateur
D-Link
D-Link DGS-3700 Series Manuel utilisateur
D-Link
D-Link xStack Manuel utilisateur
D-Link
D-Link DGS-1248T - Switch Manuel utilisateur
D-Link
D-Link Nuclias DNH-100 Manuel utilisateur
D-Link
D-Link DGS-1005D - Switch Manuel utilisateur
D-Link
D-Link DGS-1016D - Switch Manuel utilisateur
D-Link
D-Link DGS-1510 Series Manuel utilisateur
D-Link
D-Link DGS-1005A Manuel utilisateur
D-Link
D-Link Dis-200G Series Manuel utilisateur
D-Link
D-Link DSS-24+ Manuel utilisateur
D-Link
D-Link DGS-3208TG - Switch Manuel utilisateur
D-Link
D-Link DES-3224 - Switch Manuel utilisateur
D-Link
D-Link DGS-3630-28SC Manuel utilisateur
D-Link
D-Link DSS-16+ Manuel utilisateur
D-Link
D-Link DWS-3160-24TC Manuel utilisateur
D-Link
D-Link DUB-CR200 Manuel utilisateur
Manuels Changer populaires d'autres marques
Ruijie
Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation
Altinex
Altinex DA1914SX Manuel utilisateur
MiLAN
MiLAN MIL-SM2401M Manuel utilisateur
RJM
RJM MASTERMIND PBC/6X Manuel utilisateur
Atlas
Atlas MMK-KVM8 Manuel utilisateur
Cabletron Systems
Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur