D-Link DES-1005P Manuel utilisateur

2D-Link DES-1005P Quick Install Guide

Package Contents

If any of the above items are missing, please contact your reseller.

• DES-1005P 5-Port Desktop Switch with 1 PoE Port

• Power Adapter

• Four (4) Rubber Feet

The setup of the Switch can be performed using the following steps:

• Visually inspect the power jack and make sure that it is fully secured to the

power adapter.

• Do not cover the ventilation holes on the sides of the Switch, and make

sure there is adequate ventilation around it.

• Do not place heavy objects on the switch.

• Place the Switch in a cool and dry environment.

Before You Begin

Connecting the Switch

Step 1

Plug the supplied power adapter into the Switch and the other end into

a power outlet, power strip, or surge protector (recommended). Verify the

Power indicator is lit on the Switch.

Step 2

Connect one end of an Ethernet cable into the device you want to connect

to the Switch and the other end into one of the Ethernet ports on the Switch.

Check the Link lights (LEDs) on both the Switch and the device to verify that

the cable is good and that there is a valid connection. Port 1 can be used to

connect to Power over Ethernet (PoE) devices.

Introduction

The D-Link DES-1005P is an unmanaged PoE switch capable of providing

power to a Power over Ethernet (PoE) device such as a network camera or

wireless access point. The DES-1005P has ve 10/100Mbps ports with 1 port

capable of PoE (Port 1), which is useful for home and small oce businesses

who have limited budgets or compact space requirements

3 D-Link DES-1005P Quick Install Guide

Power Indicator - This green indicator light is on when the Switch is receiving

power; otherwise, it is o.

Link/Act/Speed (1-5) - This LED indicator light is green when the port is

successfully connected to a 10/100Mbps device and will blink as data is

transmitted or received.

PoE Port (1) - This LED indicator light is solid green when the port is

successfully connected to a powered device and is powering the device

properly.

If the LED is o, there is no connection to a powered device (that requires power).

LEDs

4D-Link DES-1005P Quick Install Guide

Version 1.0

September 23, 2011

D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective

owners. Product specications, size and shape are subject to change without notice, and actual

product appearance may dier from that depicted on the packaging. Visit dlink.com (US) or

dlink.ca (Canada) for more details.

Technical Support

Having trouble installing your new product? D-Link’s website contains the

latest user documentation and software updates for D-Link products. U.S. and

Canadian customers can contact D-Link Technical Support through our website

or by phone.

United States

Telephone: (877) 354-6555

Internet: http://support.dlink.com

Canada

Telephone: (877) 354-6560

Internet: http://support.dlink.ca

D-Link Green Technology implements special power-saving features that detect

link status and adjust power usage accordingly. If there is no link on a port (when

there is no connection or the device connected is turned o) the port(s) will

enter a “sleep mode” which will drastically reduce the amount of power used.

This product is IEEE 802.3az Energy Eciency Ethernet compliant. The IEEE

802.3az EEE standard denes mechanisms and protocols intended to reduce

the energy consumption of network links during periods of low utilization, by

transitioning interfaces into a low-power state without interrupting the network

connection. Both connected devices must support 802.3az EEE for power saving

support. If the connected device does not support 802.3az EEE, the switch will

default to D-Link’s Green Technology of power saving.

D-Link Green Technology

Autres manuels pour DES-1005P

Table des matières

Autres manuels D-Link Changer

D-Link

D-Link DUB-H7 Manuel utilisateur

D-Link

D-Link GO-SW-8G Manuel utilisateur

D-Link

D-Link DES-5600 Manuel utilisateur

D-Link

D-Link DKVM-4U Manuel utilisateur

D-Link

D-Link KVM-222 Manuel utilisateur

D-Link

D-Link DES-3010PA - Switch Manuel utilisateur

D-Link

D-Link DES-3226S Manuel utilisateur

D-Link

D-Link DES-1005P Manuel utilisateur

D-Link

D-Link DGS-3000 series Manuel utilisateur

D-Link

D-Link DXS-3227P - xStack Switch - Stackable Manuel utilisateur

D-Link

D-Link xStack DGS-3120 Series Mode d’emploi

D-Link

D-Link DSH-16+ Manuel utilisateur

D-Link

D-Link DES-1005P Manuel utilisateur

D-Link

D-Link DGS-1024D/E1 Manuel utilisateur

D-Link

D-Link DGS-3100 SERIES Manuel

D-Link

D-Link DXS-3610 Series Manuel

D-Link

D-Link DGS-1216T - Switch Manuel utilisateur

D-Link

D-Link DES-7200 Manuel

D-Link

D-Link des-1010g Manuel utilisateur

D-Link

D-Link xStack DES-3526 Manuel utilisateur

D-Link

D-Link DXS-1210 Series Manuel utilisateur

D-Link

D-Link DHP-540 Manuel utilisateur

D-Link

D-Link DGS-1005P Manuel utilisateur

D-Link

D-Link 1016T - DGS Switch Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur