D-Link DP 301U Manuel utilisateur
PRINT SERVER WITH USB PORT
DP-301U
Quick Installation Guide+
Руководство по быстрой установке+
Guía de Instalación Rápida+
Guia de Instalação Rápida+
快速安裝指南+
Petunjuk Pemasangan Cepat+
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specications subject to change without notice. DP-301U 02142003
If any of the above items are missing, please contact your reseller.
CD-ROM (Software, Manual and Warranty)
Before You Begin
DP-301U USB Print Server
Check Your Package Contents
DP-301U
D-Link Fast Ethernet
Print Server
5V DC 2.5A Power Adapter
Using a power
supply with a different
voltage rating will
damage this product
and void its warranty.
This product can be setup using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 7.0
You will need an Ethernet-enabled device, such as a laptop or desktop computer
and a USB or parallel-port printer that will connect to the DP-301U.
Important: TURN OFF the power to the printer before installing
the DP-301U.
3
Next, make sure that the Printer is turned OFF.
Using the USB cable, connect one end of the cable to the USB port of the
DP-301U (shown below) and the other end to the USB port of the printer.
Turn ON the printer.
Receptor for AC
Power Adapter
Warning! Only a USB printer may be connected to the USB port of the DP-301U.
Do not connect any other USB device to the USB port; to do so may damage the unit,
voiding the warranty for this product.
First, insert one end of a straight-through CAT5 Ethernet RJ-45 cable into
the “Network Port” (shown below.) Connect the other end of the cable to the
LAN port of the gateway or switch.
Note: Do not connect the power cord to the DP-301U until you are advised
to do so
Then, plug one end of the power adapter into the DP-301U and the other
end into your electric outlet.
The DP-301U will turn on and begin a self-test.
Connecting The DP-301U
To Your Network
USB Port
Network Port
For Mac OS printing, please refer to users manual located on CD-ROM
4
Setting up your DP-301U for network
printing in Windows XP
The factory default IP address of the DP-301U is 192.168.0.10. In order to print to
the printer(s) through the DP-301U, the DP-301U must have the same IP network
settings as your network. IP address can be assigned manually or automatically by
DHCP, BOOTP or RARP. To access the print server’s web conguration, manually
assign an IP address on one of the PC’s on your network to the same subnet as
the print server.
For additional Windows operating system setup or information on
the web-management interface, refer to the manual located on the
CD-ROM.
Go to Start > right click on My Network
Places > select Properties > Double-click
on the Network Connection associated
with your Network Adapter.
Input a static IP address in the same
range as the print server.
Click Internet Protocol (TCP/IP)
Click Properties
Select Use the following
IP address
IP address: 192.168.0.52
Subnet mask: 255.255.255.0
Click OK
5
Setting up your DP-301U for network
printing in Windows XP (continued)
Using your web browser enter
the IP address of the DP-301U.
By default the IP address is set
to 192.168.0.10
The IP address of the DP-301U can
be modied on the Network tab of
the Web conguration menu.
The following instructions use the
print server’s default IP address as
an example. Make the appropriate
changes if you have modied the
DP-301Us IP address.
Click OK to apply IP address
settings.
Click OK
6
Click Next
Write down on a piece of
paper the Port name that you wish
to use.
For Windows XP:
Go to Start>Printers and Faxes>Add
a Printer or Go to Start>Control
Panel> Printers and Faxes
Double-click on the
“Add Printer” icon
Click on the Congure tab to view the
current Port Settings.
Setting up your DP-301U for network
printing in Windows XP (continued)
7
Select “Create a new port.” At
the pull-down menu, highlight
“Standard TCP/IP Port.”
Select “Local Printer.”
Setting up your DP-301U for network
printing in Windows XP (continued)
Click Next
Click Next
Click Next
Please make sure to
deselect Automatically
detect and install my
Plug an Play printer.
8
Input the port name of
the port being used by
the printer
Select “LPR”
Type in the IP address of the
print server. (i.e. 192.168.0.10)
The port name will
automatically be lled in.
This may take a few seconds
Setting up your DP-301U for network
printing in Windows XP (continued)
Click Next
Click OK
Select “Custom”
Then click on Settings.
Click Settings
9
In this window, scroll down
to nd your printer. (If it is not
listed, insert the driver CD or
diskette that came with your
printer.)
Click on “Have Disk.”
Then, scroll down and highlight
the printer.
Click Finish
Setting up your DP-301U for network
printing in Windows XP (continued)
Click Next
Click Next
10
Your Setup is Complete!
The printer is now ready for
printing with Windows XP, on
your network.
Click Finish
Select “Yes” to print a test page
At this screen, you can input
a name for this printer.
Setting up your DP-301U for network
printing in Windows XP (continued)
Click Next
Click Next
Autres manuels pour DP 301U
5
Table des matières
Langues :
Autres manuels D-Link Serveur d'impression
D-Link
D-Link DP-101 Instructions d'installation
D-Link
D-Link DP-311U Manuel utilisateur
D-Link
D-Link DP-300U Manuel utilisateur
D-Link
D-Link DP-802 Manuel utilisateur
D-Link
D-Link DP-303 Manuel d'installation
D-Link
D-Link DPR-1260 - RangeBooster G Multifunction Print... Manuel utilisateur
D-Link
D-Link DP 301U Manuel utilisateur
D-Link
D-Link DP-313 - Air 802.11b Wireless Print Server Manuel utilisateur
D-Link
D-Link DPR-1061 Manuel utilisateur
D-Link
D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print... Manuel utilisateur
D-Link
D-Link DPR-1061 Manuel utilisateur
D-Link
D-Link AirPlus G DP-G301 Manuel utilisateur
D-Link
D-Link AirPlus G DP-G301 Manuel utilisateur
D-Link
D-Link DP-100+ Manuel utilisateur
D-Link
D-Link DP 301U Manuel utilisateur
D-Link
D-Link DP-G301 - Print Server - Parallel Manuel utilisateur
D-Link
D-Link DP-301 Instructions d'installation
D-Link
D-Link DP 301U Manuel utilisateur
D-Link
D-Link DP-100 Manuel d'installation
D-Link
D-Link AirPlus DP-G310 Manuel utilisateur
