D-Link NetDefend DFL-1600 Manuel utilisateur
Network
Security Firewall
This Quick Guide will guide you through the installation Process. You are
only moments away from using your new D-Link Network Security Product
Building Networks for People
DFL-1600
1.Before You Begin
1.1 Check Your Package Contents....................................................................1
2.Indentifying Components
2.1 Front View................................................................................................2
2.2 LCD Panel.................................................................................................3
2.3 LED Indicators...........................................................................................5
2.4 Default interface attribute definition..........................................................5
3.Connecting the DFL-1600
3.1 Setting up Firewall to your Network........................................................6
4.Configure DFL-1600
4.1 Configure your Computer’s IP..................................................................7
4.2 Using the Setup Wizard.............................................................................8
5.Appendix
5.1 How to Configure Static IP Manually on Microsoft Windows XP..............17
5.2 How to Configure Static IP Manually on Apple MAC OS X...........................18
6.Statement
DFL-1600 Quick Installation Guide
1.1 Check Your Package Contents
Your NetDefend Network Security Firewall package should
contain all the items listed below. If any of these items is found
damaged or missing in your package, report it to your reseller
immediately for replacement.
One (1) DFL-1600 NetDefend™ Network Security Firewall
One (1) Power Cord
One (1) Console Cable (RS-232 cable)
One (1) Ethernet (CAT5 UTP/Straight Through) Cable
One (1) Ethernet (CAT5 UTP/Cross-over) Cable
One (1) CD-ROM (containing QIG/Manual )
Two (2) Rack Mount Brackets
DFL-1600
Before You Begin 1
01
DFL-1600
Power Cord
Ethernet Cable
(Straight-Through)
Console Cable CD-ROM
Ethernet Cable
(Cross-over)
Rack Mount Brackets
The following illustrates the front panel of the DFL-1600 and
explains the front panel’s key components:
2.1 Front View
1 2 4 5 6
Identifying Components 2
1. LCD Panel
2. Power LED
3. System LED
4. Keypad
5. Ethernet ports
6. Console Port
02
3
Used to display operation messages and various status of
the DFL-1600. See the following section for details.
Power indication of the DFL-1600.
System status indication of the DFL-1600.
Operation keys used in conjunction with the LCD panel.
Connect to Ethernet cables that connect to broadband
modems and network switches.
Connects to RS-232 console cable that connects to PC.
The console port is hidden behind a protection coverlid that
can be opened by pulling down the lid.
2.2 LCD Panel and Keypad
When you turn on the power of the DFL-1600, the LCD panel
will display the following message: “Press Keypad to enter
setup” and press any key on the keypad to enter the startup
menu. If after ve seconds, you do not press any key on the
keypad, the DFL-1600 will automatically start the system.
2.2.1 Startup Menu
If you press any key within ve seconds after power-on, the
LCD will display two options:
1. Start Firewall: If you select this option, the system will start,
using the conguration saved inside the device.
2. Reset Firewall: If you select this option, the system will start,
using the factory default conguration.
Note:
If you select “Reset Firewall” and conrm this option, all previous
congurations that you saved in this device will be lost forever.
Keypad buttons denition in Startup Menu
Not Used
Next Button
Back Button
Conrm Button
DFL-1600 Quick Installation Guide
03
2.2.2 Device Status and Information
After the DFL-1600 has completed its system startup, the LCD
panel is ready to display the status and information of this
device. You can use the keypad to select a desired display
option. The following shows status and information that can be
displayed on the LCD panel.
DFL-1600 Quick Installation Guide
Next Button
Keypad buttons denition in Status Information
Item
Model name:
System Status:
CPU Load:
Connections:
Total BPS:
Total PPS:
Date:
Time:
Uptime:
Mem:
IDS Sigs:
WAN1:
WAN2:
DMZ:
LAN1:
LAN2:
LAN3:
Core Version:
Description
Display the device model name.
Display system working status.
It will show the CPU utilization and
concurrent session
Concurrent trafc statistics per second.
Concurrent packets statistics per second.
Device current date.
Device current time.
Device boot up time.
System memory utilization.
It will display IDS signature information.
Display each interface IP address
Display rewall rmware version.
04
Back Button
2.4 Default Interface Attribute Definition
Note:
NetDefendOS only allows Web GUI access from LAN 1 port by
default for security consideration. Please refer to user manual for
more detail about how to change this conguration.
DFL-1600 Quick Installation Guide
05
Wording on
Front plate
Default name
in rewall
Default interface
type denition
Default interface
IP Address
Default
DHCP Status
1 WAN1 DHCP client N/A Enabled
2 WAN2 Static IP 192.168.120.254/24 Disable
3 DMZ Static IP 172.17.100.254/24 Disable
4 LAN1 Static IP 192.168.1.1/24 Disable
5 LAN2 Static IP 192.168.2.1/24 Disable
6 LAN3 Static IP 192.168.3.1/24 Disable
2.3 LED Indicators
Status
Solid green
Light off
Solid green
Light off
Blinking green
Light off
Solid Green
Blinking Green
Light off
Solid green
Solid orange
Description
The device is powered on.
The device is powered off.
System is operating properly.
The device is not working.
System is defective, such rmware
upgrade fail.
No link
Link present
Port is sending or receiving data.
Port is operating at 10Mbps.
Port is operating at 100Mbps.
Port is operating at 1000Mbps.
Color
Green
Green
Green
Green/
Orange
LED
Power
System
Phone Jack LED
light (right)
Phone Jack LED
light (left)
Connecting the DFL-1600 3
06
3.1 Connecting Firewall to Your Network
A. First, connect the power cord to the receptor at the back panel of
the DFL-1600 and then plug the other end of the power cord to a
wall outlet or power strip. Then powered on the DFL-1600 using
the on/off switch. Now the Power LED will turn ON to indicate
proper operation. After the power LED turns on, you need to wait
1-2 minutes for the DFL-1600 to boot up completely.
B. Connect an Ethernet cable from the DFL-1600 to your Cable/
DSL modem. If the Cable/DSL modem is powered on, wait for
the WAN1 LED on the DFL-1600 to light up to show a proper
connection. Otherwise, turn off your Cable/DSL modem, connect
the Ethernet cable from the DFL-1600 to your Cable/DSL
modem, and turn on the Cable/DSL modem. Some Cable/DSL
modems may not have an on/off switch and will require you to
unplug the power adapter.
Note:
The default management IP address of the DFL-1600 is
192.168.1.1. If you have are using a router that uses DHCP,
there may be a conict if the router uses the same IP address as
the DFL-1600. If this is the case, either disconnect the DFL-1600
from the router and change the management IP address of the
DFL-1600, or change the DHCP settings on your router.
C. Insert an Ethernet cable to the LAN1 port on the front panel of
the DFL-1600 and connect it to a port on your network hub or
switch. The LED light above the Ethernet port on the DFL-1600
will illuminate to indicate proper connection
D. Connecting the computer that you will use to congure the
DFL-1600 to the network hub or switch.
4.1 Configure Your Computer’s IP Address
Make sure that the network adapter in your computer is
congured to use a static IP address with 192.168.1.1
as default gateway and 255.255.255.0 as netmask.
Instructions on how to congure the network adapter can
be found in the appendix.
When you have completed the steps in this Quick Installation
Guide, your connected network should look similar to this:
Configure DFL-1600 4
07
Cable/DSL Modem
DFL-1600
Switch
Internal
Network
DMZ
Network
(optional)
Computer1 Computer2
4.2 Using the Setup Wizard
The DFL-1600 provides Web based conguration. You can congure
your DFL-1600 through Internet Explorer 6 and later or Firefox 1.0 and
later browser in MS Windows, Macintosh or UNIX based platforms.
Activate your browser, and ensure your built-in Pop-Up Blocker has been
disabled, so that the Pop-Up Blocker will not block the Startup Wizard
while you initiate the NetDefend Firewall for the rst time.
Additionally, in order to reduce the impact of Pop-Up Blocker, a user-
friendly mechanism has beem implemented in NetDefend Firewalls. A
"Startup Wizard" button is shown on the toolbar since rmware v2.20.
This button is available on the WebGUI while the appliance is initiated
with Conguration Version 1. Once you complete conguration and
save/activate the setting, the Startup Wizard button will be removed
automatically from the toolbar while you login WebGUI next time.
Now, let's start on WebGUI login, type the IP address of the DFL-1600,
e.g. https://192.168.1.1, in the Location (for Netscape) or Address (for
IE) eld and press "Enter".
Log on to the DFL-1600 web interface.
To start using the DFL-1600 web interface you need to log on
using the default username and password.
DFL-1600 Quick Installation Guide
Open your Web browser and
type https://192.168.1.1 /
into the URL address box.
Then press the Enter or
Return key.
Type the default
Username/Password
Username: admin
Pasword: admin
and click Login
08
Note:
DFL-1600 allows either HTTP or a secure HTTPS connection
from any management host. However, for security reason, by
default only a secure HTTPS connection is allowed.
Table des matières
Autres manuels D-Link Routeur réseau
D-Link
D-Link myPocket DIR-457 Manuel utilisateur
D-Link
D-Link DI-304 Manuel de service
D-Link
D-Link DES-3550 Manuel utilisateur
D-Link
D-Link DES-1005D Manuel utilisateur
D-Link
D-Link COVR-C1203 Manuel utilisateur
D-Link
D-Link Express Ethernetwork DI-704P Manuel utilisateur
D-Link
D-Link DIR-625 Router Manuel utilisateur
D-Link
D-Link DSL-2641B - Wireless G Router Manuel utilisateur
D-Link
D-Link DXN-221 - HD MediaBridge Coax Network... Manuel utilisateur
D-Link
D-Link DI-300 series Manuel utilisateur
D-Link
D-Link DSL-2544N Manuel utilisateur
D-Link
D-Link xStack DES-3528P Series Manuel
D-Link
D-Link DHP-601AV Manuel utilisateur
D-Link
D-Link EBR-2310 - EN Broadband Router Manuel utilisateur
D-Link
D-Link DIR-608 Manuel utilisateur
D-Link
D-Link DIR-868L Manuel utilisateur
D-Link
D-Link DES-3226L Manuel utilisateur
D-Link
D-Link DWR-932C Manuel utilisateur
D-Link
D-Link DVG-5402G Manuel utilisateur
D-Link
D-Link DI-300 series Mode d’emploi
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité